S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • USA

Sonic 185 EP Planeur 1850mmn (PNF)

Sonic 185 EP Planeur 1850mmn (PNF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
3490 g
SKU:
Sonic185-PNP
Description
du

Ce grand planeur recherche est en mousse dure OEB et être plug and fly, nécessite un minimum de temps pour le montage.

Propulsé par un moteur outrunner 200w brushless qui a été prémonté, avec le CES, ce grand planeur de taille a beaucoup de pouvoir pour atteindre rapidement de l'altitude, il est plein à quatre canaux et tous les servos ont également été pré-équipée. Le fuselage comporte des tiges en fibre de carbone qui descendent cette colonne pour éliminer flex et l'aile amovible 2 pc non seulement rend le Sonic pratique, il dispose également d'une grande clé d'aile CF pour la rigidité.

Ceci est une excellente qualité et une grande aile à la recherche qui est une bonne taille, est pas cher pour entrer dans l'air et va durer des années à venir, le bon jour, le Sonic donnera fantastiques temps de vol avec une grande performance de vol, un grand PNF planeur qui fera appel à tous les pilotes RC!

Spécifications:
Envergure: 1850mm
Longueur: 1090mm
Voler Poids: 980g
Moteur: Brushless Outrunner 200w
ESC: 30A w / BEC
Servo: 9g x 4

A besoin:
Votre propre 4 canaux TX / RX
Batterie 1800mAh 2s Lipoly

Product
Specifications

Informations supplémentaires

  • Référence:
    Sonic185-PNP
  • Brand:
    Non communiqué
  • Poids (g)
    3490.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Mine arrived last week. Went together well. The box that the bird came in was a Rtf box and showed a 2200 mah 3 s. way to heavy. I used a 1800mah 3 s and added 3 large washers to the base of the rudder, one fitted to a slot cut in the tail skid. The other two are just stuck to the side of the tail. On the maiden I gave it full throttle and let it go vertical, no issues reaching a good altitude. I also covered the bottom of the fuselage with "glass repair tape", that's what it's called in Bunnings. This keeps the bottom of the fuse from getting all crappy. The wing flutter is a little scary, just watch your speed and all is good. Over all I think this bird is good value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my first plane and due to my inexperience it has taken some serious abuse but it repairs up really well. All the servos seem to be pretty tough I did strip one by glueing the rudder wire whilst repairing a break in the tail. It works really well as a glider but is very agile an acrobatic lots of fun. I am running a smaller prop and am using a 1300 3s battery instead of the 1800 2s recommended and I find it works real well and I can glide around for ages if I want to. It also seems to balance out a lot better too.
Big thumbs up have really enjoyed this plane. Would like to have one that I haven't beat up so much though
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The usual good service from Sydney. Very nose heavy, even with recommended 2 cell 1800 battery . Elevator pushrod binds so servo doesnt centre well. Solution : put elevator servo in rudder with direct pushrod to elevator...easy to route the cable in the foam. Flies well on 2 cell battery with sufficient power to get up to the thermals so no need for a 3 cell. None of the reported flutter in my plane. Overall a happy camper. Looking forwards to flying it on the slope
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.