S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Souka PPE Modèle w / Moteur (Unbreakable)

Souka PPE Modèle w / Moteur (Unbreakable)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
2489 g
SKU:
SOUKA-EPP
Description
du
Les Japonais conçu Souka a un fusible et couture formées des lignes qui le rendent encore plus incassable qu'un foamie PPE standard!
Fabriqué à partir de mousse EPP super-élastique, il est encore plus souple que la mousse EPO et peut gérer les impacts sans casser!
Caractéristiques:
Longueur du fuselage: 960mm (37.8in.)
Envergure: 900mm (35,4 in.)
Poids en vol: 390g-410g
Hélice (inclus): 1060 lent dépliant prop
Système d'alimentation (inclus): moteur brushless outrunner 2212
Obligatoire:
Votre propre Tx et Rx
30A brushless ESC
4x 8g servo
Batterie 1000mAh 11.1V 3S Lipo
Product
Specifications

Informations supplémentaires

  • Référence:
    SOUKA-EPP
  • Brand:
    Non communiqué
  • Poids (g)
    2489.00
  • Longueur
    1035.00
  • Largeur:
    100.00
  • Taille:
    265.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Leider sehr schlechte Qualitt. Die Scharniere brechen schon beim ansehen, die verklebungen lsen sich bereits vor dem ersten Flug. Fahrwerk reisst bei sanftesten Landungen etc. etc. etc. Mit Superkleber hlt hier gar nichts. Die Anleitung ist von einem alten Modell, ...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
They advertise as unbreakable, however that is a total lie. This is an extremely fragile plane. It flys well and hovers nice but long term durability is not going to be good. The factory glue is a total joke I had the entire motor board/ mount come unglued in flight the plane hit the ground in about 6in of grass and crumpled the front end completly. Luckily it is epp and is really easy to fix but I will not be purchasing this plane again. FYI this plane weighs next to nothing so it has to be dead calm to have any kind of fun flying.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Viene con motor para 2s, de 1000 mah esta bien. Fijar ala al fuselaje con cola caliente o epoxi (no utilizar el cianocrilato como dice las instrucciones). Reforzar todos los <horn> y bases servos con una capita de 1 centimetro alrededor de estos de epoxi o cola caliente. Los reenvios son metalicos en las puntas y varilla de carbono en medio fijado con termoretractil, hacer pequeo doblez en los metalicos para que se quede segura la union y no se desplaze una sobre la otra. Si haces estas operaciones te ira de lujo. Saludos desde Granada (Espaa)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The plane is really nice.It is perfect for learning to fly 3d.And it is unbreakable.That little motor has plenty of power.Even if i am using twice the battery size it hovers at half throttle.I have the maiden flight on my channel (Rc Mania Cyprus) and i will have a 3d flight video later.

-Dimitris-
-RcManiaCyprus-
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well it would be nice if it were just a "little bit" unbreakable. On my second day I lost control from a wind gust and the Souka nosed in. Busted the motor mount [motor hanging] and so far I haven't been able to figure out how to get it back together decently.

It flew good for a short time! I sure didn't think it was that hard of a hit to justify the damage that occured.

Aloha Jack
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The material tears very easy. Good motor, flies good but is not unbreakable. If falls is very easy crash the plastic parts of plane
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this from AUS warehouse, well pack and receive within 3 days. Overall the plane are fine; I did not get any issues with the WING or BODY flexing when the servos are in operation. I do have problem with the CG, I have to put 2x 3s1000mAh in parallel to get the CG correct. Total flying weight 520gr - fly well so far . At the local park, got between 18 to 20 minutes of flight 1/2 to 3/4 throttle - I would expect 12 to 15 minutes for aggressive flying. All parts are good conditions; I change the prop to 9x4.5. Evotite CA460 Foam Safe Super Glue is used. I used 4x HXT900 9gr servos, require 20cm servos extension for the rudder and elevator. Just toss the plane at half throttle to start with, great value and good quality kit. I hope HK also bring the TechOne Venus Indoor 3D EPO soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have flown the twin to this plane the Angel . It is an amazing fun plane. 3D is a snap and an easy fix with hot glue gun I didn't have engine, ESC issues. Even the top 3D guys in the club liked the plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane is great, well worth the money. When the weather is nice and the wind is not strong it is flying with 1000 mah 7,4v 2s 20-30c Propeller 1047. It is easy to control and no twisting at all. But I have to reinforce fastening of the battery by the tape inside the fuselage. I am happy with this product and very grateful to you.



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice plane. Motor is very powerful, and so much power, it can bend the thin controlsurface wires, and cause an accident at full throttle. But lots of fun, and very responsive. I installed gyros on rudder and aileron surfaces and it was extremely stable, easy to hover. It would last at least 15 minutes on a Rhino 1050mah 3s battery.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.