Spinner 56diam arbre / 5mm

• Overall
• Quality
• Value

Good looking spinner but make sure it will fit.

Apr 11, 2021

So the little spinners are pretty nice. However the spinner is made so the back plate is the surface the hits the base on the motor shaft. So the prop adapter is built in. But most prop adapters step out 1/2" to 3/4" from seated then the spinner back plate and prop go on. So hard to explain but the spinner back plate is back the 1/2"plus from your normal prop adapter. So when you install the spinner/prop adapter it will hit the cowl of the plane long before it slides on the motor shaft down to the base to be tightened. So to make it work on most planes you would have to move your motor forward with standoffs until the spinner will clear the cowl.

• Overall
• Quality
• Value

Nice spinner but does not fit most airframes.

Apr 07, 2021

Great spinner but it will only fit planes that have a flush cowl. So the base needs to stop on the motor shaft against the motor can this surface of the motor can must be the same as the cowl surface. So most foam planes or current planes you can buy the motor is set back about 1/2" behind the cowl so when you go to install this spinner it hits the cowl long before it pushes down seated on the motor shaft. So I bought it and it does not fit any plane I own. Bummer as it is a nice looking spinner. Also it is fairly heavy vs a plastic or carbon spinner. But looks good once I get a plane it fits.

• Overall
• Quality
• Value

Excellent quality

Dec 02, 2020

It was a perfect fit. I can just recommend this product.

• Overall
• Quality
• Value

all right

Jun 15, 2020

all right

• Overall
• Quality
• Value

ANOTHER QUALITY PRODUCT

Jan 21, 2020

Yes, This is another quality product from HK. The finish and balance are good. It has a neat "needelnose" shape. I highly reccomend it.

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 17, 2012

OTTIMA QUESTA OGIVA IN ALLUMINIO E PERFETTAMENTE REALIZZATA. L'HO MONTATA SULL' F3A DI HK. CONSIGLIATA!!!! 5NSTELLE

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 24, 2012

Acabado perfecto, encaja muy bien en mi MQ9 Reaper.

• Overall
• Quality
• Value

Customer Rated

Jul 17, 2012

Excellent quality spinner, especially for this price!

People say they have been having centring issues with this collet. HERE'S THE FIX!

The collet is removable, leaving a hole 10mm in diameter in the back plate. Will obviously fit a 10mm motor shaft without modification. I'm planning on using it on a 8mm shaft, and so will use a 8mm internal diameter and 10mm external diameter nylon spacer. The back plate will sit squarely against my prop adapter, and I'll use a GS0042 (Hobbyking 8mm adapter) to secure the spinner. this will add $2 to the cost. Still MUCH cheaper than buying one locally!!

WAY TO GO HOBBYKING !!

:))

• Overall
• Quality
• Value

Certified Buyer Rated

May 25, 2012

Otimo produto! Recomendo a compra!

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 07, 2011

Il tient bien chez moi comparer au autre review ... A voir avec le temps