L'Esprit est un mini planeur brillant et rapide avec un clip de pointe ainsi que la construction qui fait pour un montage rapide et facile le remplacement de pièces, il est également livré avec un kit de conversion poussoir pod (moteur pousseur non inclus) qui est idéal pour transformer l'Esprit dans un mini plate-forme de FPV.
Fabriqué à partir de mousse EPO dur, l'Esprit est à la fois rapide et facile à assembler, le moteur et prop pliage ont été pré-installé et les ESC & servos sont également pré-équipée, les ailes et toute la queue en mouvement clip simplement ensemble et 2 pc vis à oreilles, en fait, il prend plus de temps pour appliquer les décalcomanies que construire le modèle! Pour ceux qui peut-être vouloir FPV avec l'Esprit, le modèle est livré avec une nacelle de moteur pousseur (pas de moteur inclus) d'obturation de remplacement nez conique et différent prop / spinner, modification de la configuration est simple et rapide une fois que vous avez assemblé votre propre moteur dans la nacelle, potentiellement vous offrir une autre façon de profiter de votre Esprit.
Comme il vient, l'Esprit est une explosion de voler, rapide et agile avec une superbe hors tension glisse, il n'a pas de mauvaises tendances faisant ce grand petit planeur facile à piloter et d'énormes quantités de plaisir. Assez petit pour être transporté dans le parc encore assez rapide pour élever le pouls, l'Esprit est la benne parfaite n mouche modèle, beau, facile à transporter, facile à assembler, robuste et et une huée à voler, l'Esprit est un sort terrible de modèle pour l'argent!
Plug and Fly .... ajoutez simplement votre propre Reciever / batterie et voler!
Rapide et simple à assembler
Choix du tracteur ou de configuration Pusher
Robuste Construction EPO Foam
aile amovible pour Easy Transport
Tout Tail Moving pour le contrôle supérieur
Livré avec des outils pour l'Assemblée .... pas de colle nécessaire!
Ensemble clip ailes et la queue pour Easy pièces de rechange
Performance de vol Superbe
Voler Poids: 345g
Poussée: 580g (tracteur)
Moteur: 2621 Brushless Outrunner 1100kv
Prop Taille: 8x5 pliant
ESC: 20A w / BEC
Servo: 5g x 4
Pusher Motor Pod, 5x4.5 Prop, Spinner & Nose Cone Blank
Your Own 4 canaux TX / RX
22-26 2200kv Brushless Outrunner Motor (Pusher conguration uniquement)
Batterie 450mAh ~ 500mAh 3s Lipoly
I bought this litte glider in a sale and at first look out of the box I was really happy. The foam looked nicely smooth and durable and the sticker went on well. Unfortunately when I screwed the main wing on, nothing was really true with this glider. There was a huge angle between the vertical stabilizer and the main wing, so I cut down a bit from one side of the fuselage to make them even. Next thing I noticed is that the fuselage has no right angle to the main wing on mine, which bothered me before maiden.
But maiden flight went exeptionally well. It tracks like on rails, rolls like crazy and goes up vertical without a limit. It's quite fast, but can also been flown pretty slow with no tip stalls so far. Only the motor gets quite hot, so I need to pause after one flight to let it cool down a bit before the fun begins again!
Definitely recommended, if you don't care optimizing a bit with a cutter :-)The Spirit Mini is an awesome glider. Out of the box is pretty much does it all - it flies like it is on rails yet is highly agile if you want to do aero's. The standard motor has heaps or grunt to move the Spirit along at a rate of knots. The glider is not quite a hotliner but it certainly does not want for speed. I am using 3S 850mAh packs in mine for about 8 minutes of powered flight. On the slope with about 15kph of wind, the Sprit is a good sloper. I can't pick a fault with my Spirit Mini Glider. I recommend this one. Good job HK!!The best Merlin-Clone in this shop :)
All links are same as the original only made of another kind of Plastics.
For sure it's not a hotliner but it is flying faster than expected. Nice plane for a fair price.
flew mine for the first time today. There was hardly any winds. All went well, I used a 850 3S nanotech that goes in the front, and all the rest is underneaty (esc and my receiver). I didn't bother using any velcro; the receiver lies loose but cannot move around enough to matter. The 3S 850 nanotech fits snug in the front, it is very tight, and that is a good thing. CG is okay in that setup; I hardly trimmed any elevator. I did trim out the ailerons, it tended to roll somewhat.
One thing I still need to fix is the ESC brake setting. The motor does not brake, so the prop keeps spinning (windmilling) even with throttle off. So I landed with a spinning prop, but it did not get damaged. Happy with this plane, will be taking it with me on vacation. Taking it apart and putting it back in the box is do-able. ESC got hot (warm anyway) on the bench, just feeding the receiver and servo's while setting things up. See how it will hold up after a few flights, maybe put in a slightly better ESC. I will have to see.I purchased this with the Kenetic and like the Kenetic better due to the design of the battery compartment but everything else is similar, this does have a 2-piece wing but since its only 815mm theres no need to break it down for transport.Recieved the glider very fast, once I opened up the box, everything was super! for this price, you can't go wrong. I ordered 3 Lipo's 460mah 3S , and they fit perfect. Flying the glider is a piece of cake, track's like it's on rails. Very happy with it!I bought this mini glider for fun but unfortunately the BL did not work from the beginning..that a pity..I'm not satisfied about the product!
Hey HK please double check the material purchased fro Freewing!
Now I have to replace the BL motor...Its took a long time to put together because excess glue in manufacture stopped the wing from fitting together. However this plane flies even better than you think it will. Its much easier and more fun than you expect. This plane is also quite easy to repair and this is good because I have ripped the motor of 3 times. It lands fast and glides a lot longer than I expect. Also check the links are trimmed and tight. The plane ended up in three parts on the second flight because I did not notice the elevator link was not tight.Great model not so great PNF.
Two fus halfs not aligned 1 half 2.5mm higher than the other. So this tilts wing, had to shave one side pack the other. Then you find the fittings securing the wing are not aligned so the wing is not perpendicular to the fus. Then 1 aileron servo does not travel the same as the other(which one is it , prise out both and replace). Can we just have a kit, it takes so much more time and effort to correct an alleged pnf which overall is just not good value. motor,esc,all moving tailplane plane design good- build not so.Wow what a suprise. Lets start with the assembly it is all screw and clip together with no glue required. It has an XT60 connector but only runs on 500mah batteries with JST connector, so you will need an adapter. I marked it down one star on quality as I had to re-glue one servo in the wing. Out of the hand it flew like it was on rails, it did however climb under full power. A slight bit of trim and a mix for full throttle fixed this. Climbs well, loops and rolls are no problem. Power off it glides well in the strong wind. It comes in quick for landings but it straight and easy to judge. Would happily buy another if I kill this one. Expect 5 minutes flight time from the 500 batteries longer if gliding as well. Good plane that I would recommend.