S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Cadre ST360 Quadcopter w Motors et Hélices 360mm /

Cadre ST360 Quadcopter w Motors et Hélices 360mm /

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
740 g
SKU:
031000132

Combinez

et économisez plus
esc
battery
acc
Description
du

Le ST360 est un cadre de 360mm quadcopter bien pensé construit à partir de matériaux de qualité. Le cadre principal est en alliage d'aluminium tandis que les bras sont construits à partir de polyamide nylon ultra résistant.

Assemblée est un jeu d'enfant avec tout le matériel nécessaire inclus. Le ST360 inclut même 4 moteurs et des hélices supprimant toutes les conjectures de choisir votre propre système d'alimentation. Vous aurez simplement besoin d'ajouter vos propres CES brushless, multi-rotor carte de commande, la batterie 3S et système radio 4CH.

Une grande caractéristique de ce cadre sont les grandes pattes de fixation à l'avant et l'arrière de la plaque de fond de cadre principal pour les caméras de montage ou d'autres accessoires. Ceci en fait un excellent moyen de prendre la vidéo aérienne ou à la mouche FPV sans la nécessité d'ajouter des supports de montage supplémentaires.

Le ST360 dispose également d'armes colorées (2 blancs et 2 jaune) qui sont grands pour l'orientation. Il aide à garder vous voler dans la bonne direction.

Nous offrons une gamme complète de l'électronique multi-rotor comme le multi-rotor carte de commande, les CES et plus encore. Il n'a jamais été plus facile ou plus abordable pour obtenir un quadcopter dans l'air!

Caractéristiques:
• Construit en alliage d'aluminium de qualité et de nylon polyamide.
• Bras de couleur pour l'orientation pour vous garder voler dans la bonne direction.
• pattes de montage grandes sur la plaque principale de fond de cadre pour le montage facile à la caméra.
• Facilité de montage.

Spécifications:
Largeur: 360mm
Hauteur: 90mm
Poids: 170g (w / out électronique)
Trous Moteur Mont Bolt: 16 / 19mm

Inclus dans la boîte:
Cadre ST360 Quadcopter
4 x moteur sans balais ST2210
4 x 8045 hélice
sangle de batterie
Tout le matériel nécessaire

Obligatoire:
Votre propre émetteur et le récepteur 4CH
4 x 15 ~ 25 Amp ESC
1 x-Rotor multi Control Board HobbyKing
1 x 1800 batterie ~ 3000mAh 3s 11.1v Lipoly

Product
Specifications

Informations supplémentaires

  • Référence:
    031000132
  • Brand:
    Non
  • Poids (g)
    740.00
  • Longueur
    260.00
  • Largeur:
    50.00
  • Taille:
    220.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The prop adapters keep falling of the motors. No matter how hard I tighten them. Be warned. You will need some sort of landing gear if you mount your battery under the frame. I'm using kk2 with hobbykings 20amp esc flashed with Simonk. Flies ok once you get it tuned in.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This frame package is a good deal for a beginner, but suffers from poor design and quality issues.
Quality wise, my frame came with screws that were too large to fit through the holes in the aluminium plates - I had to manually enlarge each hole first before attempting to use these screws. After getting the screws 80pcnt of the way in, the heads stripped on EVERY single screw. Instead of being a cross head, they are a tiny Hex/allen key, whilst I had the right tool, the poor quality of the screws meant that as soon as they started meeting resistance, the head was stripped, rendering them all useless. I had to buy a new set of screws (which are very hard to find and expensive due to their size).
Design wise, the frame leaves no space for a battery, you are left to mount it underneath. The legs are too small for this and your quadcopter is expected to land on the battery which is hugely dangerous. Take a look around online and you will notice anyone with this quad has had to buy/build their own legs to get around this issue.
The redeeming factor is that the motors seem to be pretty decent and its fairly good value overall. Although I would rather have spent 10pcnt more and got a similar deal elsewhere for a better quality kit.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great kit for the money, plastic arms can break easily if your a beginner but it's cheap enough to replace even buy a new kit for spares. Motors are very good, very happy with it. Flies awesome.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Loving this quad. I'm using an emax 4x esc with the kk2.1.5 board. Flies like a toy Hubsan quad - in a good way. Very responsive. Much smoother than a 450 size and big enough to still see. I get 13 minutes on FPV with a 3700mah battery. I stink at FPV, but I get similar flight times flying it harder line of sight. Amazing. Had one mishap that broke the foot on of the arms and nothing else. My 450 quad would have been in pieces.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent product. Not a lot of space between plates but easy with use of standoff.
Motors are powerfull.
My setup:
ESC: 30a afro
FC: KK1.5v4sc
HK PowerBoard 3.5mm bullets
3S 2200 ZippyCompact
13 minutes flight
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My first Quad, Flies like a champ with the HK 2.1 board. All in without a radio the build was $110.00 US. Can`t beat it ! total assembly time about 3-4 hours. Motors are so quiet my friend with a DJI Phantom is jealous. I had to dial in lower rates on the T 9x it is so sensitive to stick movement.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great quadcopter to get in the hobby , good value .
Do not overtighten the screws, you must buy m3x10 screws seperately to mount the motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's a nice looking frame, but it has some downs. The holes for the lower aluminium plate didn't quite fit. Some force was needed to get the screws in with an angle.
Second problem is that the holes for the motors were fitting, but the screws length didn't allow to really get more than one or two turns into the motor.
I needed to make some corrections here. A little longer screws should do the job, but I worked on the plastic of the arm.
And the last downer: the motor on full throttle is really bending the arms. They should be a little more stiff imho. But that shouldn't matter too much, when in the air.

Still I love the product, but it could be a better quality to make it perfect.

My configuration is with a NanoWii controller (MultiWii 2.3) and Afro 20A Slim ESCs.
The Motors fall out of sync again and again and I need to investigate how to fix that. But thats another story... related to the ESCs I guess.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've bought several of these. The motors, props, and arms are what break, so it's a really good repair kit for itself. However, the recent ones I've bought all have the same stupid flaw, the bottom panel has the holes drilled in the wrong place! They don't line up with the leg holes at all. I compared it to one that I built about 6 months ago (The first one) and the legs are the same, but the bottom plate's holes are in a different place... Bummer, because I'm trying to build a second one right now.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's really good, very stable frame. Frame weight is 170 g, frame motors escs (Multistar 15A) is 400 g, take off weight (with Zippy 1800mAh 3S, Hobbyking Multi-Rotor Control Board V2.1, Turnigy 9X receiver and some wires) is 645 g. Hovering power consumption 6-7A with 3S, flying time is about 15 min. 2S setup is not flyable.
This quad could take up to 350g payload, but i prefer flying with FPV equipment of about 90g. There's enough space to place an Arducopter board with GPS module and telemetry small FPV set.
To sum up, it is an excellent, extremely durable quad and it's very affordable!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Customer files
No File Name Télécharger maintenant [2192kb]
No File Name Télécharger maintenant [2192kb]
ready to fly with KK2.0 v1.5 Télécharger maintenant [70kb]
ST360 Télécharger maintenant [567kb]
Myself with the quad Télécharger maintenant [989kb]
everything required Télécharger maintenant [4227kb]
here Télécharger maintenant [1639kb]
ST360 Télécharger maintenant [2496kb]
upgrade chassis Télécharger maintenant [138kb]
No File Name Télécharger maintenant [283kb]
multiwii pro ready to fly set up (light Télécharger maintenant [5206kb]
multiwii pro ready to fly set up Télécharger maintenant [5244kb]
ST360 Photo Manual 8 Télécharger maintenant [409kb]
ST360 Photo Manual 9 Télécharger maintenant [373kb]
ST360 Photo Manual 10 Télécharger maintenant [304kb]
ST360 Photo Manual 11 Télécharger maintenant [148kb]
st360 TRIcopter 1 Télécharger maintenant [256kb]
st360 TRIcopter 2 Télécharger maintenant [279kb]
st360 TRIcopter 3 Télécharger maintenant [228kb]
st360^^ Télécharger maintenant [164kb]
ST360 Photo Manual 1 Télécharger maintenant [364kb]
ST360 Photo Manual 2 Télécharger maintenant [277kb]
ST360 Photo Manual 3 Télécharger maintenant [288kb]
ST360 Photo Manual 4 Télécharger maintenant [326kb]
ST360 Photo Manual 5 Télécharger maintenant [312kb]
ST360 Photo Manual 6 Télécharger maintenant [332kb]
ST360 Photo Manual 7 Télécharger maintenant [375kb]
ST360FPV Télécharger maintenant [1705kb]
ST360FPV1 Télécharger maintenant [1598kb]
ST360FPV Télécharger maintenant [1705kb]
No File Name Télécharger maintenant [1800kb]
ST360FPV Télécharger maintenant [1682kb]
ST360FPV Télécharger maintenant [1800kb]
ST360FPV Télécharger maintenant [1682kb]
ST360FPV Télécharger maintenant [1682kb]

Combinez

et économisez plus
esc
battery
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.