Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Flotteurs orientables pour Cessan 182 1.5meter Seaplane

Generating Links

Flotteurs orientables pour Cessan 182 1.5meter Seaplane

Prix:

Now save économisez 0,00 € 0,00 €

26,22 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
C-182Floats
Livraison gratuite? Cliquez ici pour apprendre plus!
Flotteurs orientables pour 182 1.5meter Lumière Aircraft / Hydravion


* Note: Le 182 hydravions vendu séparément.
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

watson220 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 29, 2013

Plavky na hydropln , s z kvalitnho tvrdho EPP. Prekvapia svojou mohutnostou plus v dodavke je aj servo na ovldanie kormidla.

roeland | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 30, 2012

Hele mooie drijver set, 85cm in lengte gewicht inclusief aluminium stangen 465 gram!!

Perfecte afwerking en goede montage mogelijkheden.

Ga binnenkort onder mijn Bixler 2 proberen, denk wel dat ze aan de grote kan zijn maar is het proberen waard!!



Test results later.



Great job HK!!

Nickybomz | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 30, 2012

These floats are great! Made my EdoModel and suit the EdoModel Cessna that hobbyking sell (although they dont use the brand name). Highly recommend this product, my Cessna seaplane is a whole lot of fun!!

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 13, 2012

very large floats made out of foam whit one servo

greenbeast | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 18, 2011

VERY IMPORTANT to seal all the joints with clear tub & tile sealant or equivalent silicone adhesive! These units are NOT WATER-TIGHT as we all would expect. The two halves are loosely joined together by the manufacturer with cheap adhesive. Blowing air through the seams penetrates the floats in between gaps. Otherwise, the construction is good and the hardware is solid but rudder servo is cheap, noisy, and does not center well. I'm using these on a 55" EPO cessna 182 weighing approx. 2 lbs.

masciaj | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 15, 2011

First flight I had trouble getting off the water and when I did I could not keep the plane level. I hit the water and one float broke from the mount. The plastic that attaches them is not very strong. Anyway I discovered that one of the floats had water inside of it. This is prob why I could not keep the plane from turning. I am guessing the float has a bad seal somewhere so it filled with a little bit of water and I just couldnt keep her level. I have to figure out a way to repair these floats so I can try again now. The servo was also mounted reverse and the push rod is way to flexible. Im not very happy.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 16, 2011

Very, very nice floats. Has a servo built into the right float with a piece of plastic glued over it to keep it dry. Also includes an extension Y-cable for plugging into your plane's rudder. The water rudder is very nice and works well and is easily mounted/removed from the float. Tried this on a souped-up Hawk Sky and had to make smaller struts to fit the HS fuse. Couldn't get it off the water, though, the HS was not powerful enough.

Sergey | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 14, 2011

The quality of the floats is nice, every detail is present in the box. I took one star off, because the metallic parts are too thick and heavy. They could be a little lighter.

skytravel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2011

Hi, can I use it for EPO Giant cessna 182? Or which floats on HK are optimal for this model? Thank you for replay.

WEN | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 04, 2011

came well packed (double boxed) nicely finished foam includes servo and fittings but no screws or bolts???

will fit to 1.4m cessna with flaps 35 42 ..1250motor 10x6 prop...expect good results

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!