Jumper T8SG V2 Advanced Multi-protocol Transmitter Mode 2
Jumper T8SG V2 Advanced Multi-protocol Transmitter Mode 2
The Jumper V2.0 Transmitter is very versatile and comes with four individual RF Chip modules that work with open source multi-protocol firmware that will support most mainstream remote controls. This will allow the transmitter to be compatible with many different receivers such as Walkera, Spektrum, Flysky, FrSky, Futaba and others (see specs below for full range). The various protocols can be easily selected from the model menu.
There is an external bay (JR/FrSky compatible) for using other proprietary modules. The transmitter can use up to 12 channels depending on the receiver type. Setup viewing is by a 1.7inch 128 x64 resolution LED screen.
The Jumper V2.0 Radio Transmitter makes it easy to use types of models with different protocols.
Features:
• Built-in four-in-1 RF Module (CC2500 CYRF6936 A7105 NRF2401)
• Open source multi-protocol firmware, compatible with most mainstream remote controls
• T8SG 1.7” LCD Display
• JR/FrSKY compatible module bay on rear side
• USB online firmware upgrade
• Transmission power adjustable to adapt to different location requirements
• Detachable antenna, easy to change
• Ultra-low power consumption, longer battery life
• Up to 12 channels of output (depending on the receiver), Open Source Firmware, all channels are fully programmable
• Multilingual menu
• Vibration reminder function
• Support telemetry (depending on the receiver)
Specs:
Size: 158 x 150 x 58mm
Weight: 338g (without battery)
Transmission frequency: 2.400GHz-2.7GHz
Transmitter Module: Four in One High Frequency Module (CC2500 CYRF6936 A7105 NRF2401)
Transmit power: maximum 22dbm (transmit power adjustable)
Antenna gain: 2db (detachable antenna, easy modification)
Working current: 88Ma@8.4V
Working voltage: DC4.5-DC18V (factory with 4 x AA battery box, lithium battery 2S recommended, batteries not included)
Remote control distance: > 2km @ 22dbm
Number of channels: up to 12 channels (depending on the receiver)
Display: 1.17-inch LED display, 128 x 64 resolution
Rocker way: non-contact 3D space vector Hall joystick
Upgrade method: USB online upgrade
Supported Protocols:
Walkera full range
DSM2/X full range
Flysky and Flysky 2A
FrSKY
FUTABA s-fhss full range
WL Toy series, Hubsan series, Esky series and many more (Currently a total of more than 40 supported protocols)
Uses open source software with continued support and development, adding new protocols regularly.
Simulator mode: 3.5mm standard ppm output
USB output.
Required:
4 x "AA" Batteries
Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire
Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire
Brad | Acheteur vérifié
-
Overall
-
Quality
-
Value
Good Budget TX
May 07, 2019
John | Acheteur vérifié
-
Overall
-
Quality
-
Value
description is not correct
Oct 24, 2018
| Owner's manual | Download [1] |
Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!
