Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Le HobbyKing ™ 540T bord PPE / Light Contreplaqué 3D Voltige Avion 1430 mm (ARF) (Rouge)

Generating Links

Le HobbyKing ™ 540T bord PPE / Light Contreplaqué 3D Voltige Avion 1430 mm (ARF) (Rouge)

Prix:

Now save économisez 0,00 € 0,00 €

123,44 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9420000007-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Le HobbyKing® ™ bord 540T brouille la ligne entre la mousse et la lumière fuselages 3D de contreplaqué. Doté d'un fuselage entièrement intégré et intégrant un cadre de contreplaqué léger recouvert de mousse EPP, ce bord 540T est ultraléger pour un modèle de sa taille. La combinaison de matériaux offre un ultra-léger de la cellule mais rigide qui est corsé comme une véritable cellule. Ses capot arrondi, couvert incurvé, des stabilisateurs de l'air déjoué et des lignes douces du fusible donnent vraiment ce modèle un look échelle.

grandes surfaces de contrôle du 540T offrent une énorme quantité de déviation grâce aux extensions de bras de servo. Ceci, combiné avec la cellule ultra-léger permet à tout du sport animé desservant tous azimuts 3D extrême; prop pendaison, spins, dégringole et busards sont bien à l'intérieur du répertoire de ce modèle.

Le 540T est équipé de matériel de haute qualité, y compris le train d'atterrissage en fibre de carbone et des roues en plastique avec pneus en mousse. Pas besoin de mettre à niveau le matériel sur ce modèle, la qualité est déjà inclus.

Le HobbyKing® ™ 540T bord ne pouvait pas être plus facile de construire avec son boulon sur les ailes, servo pré-installé monter les plaques et la canopée magnétique. Même les clips de capot et à l'extérieur sans avoir besoin de colle / vis. Le montage est simple, tout ce que vous devez faire est de charnière les surfaces de contrôle, de la colle dans vos stabilisateurs horizontal / vertical, attachez le support de la roue arrière et installer vos appareils électroniques.

Ceci est un modèle unique et magnifique avec les caractéristiques de vol pour correspondre. Du sport volant 3D extrême, Edge 540T peut gérer tout cela.

Caractéristiques:
• PPE / contreplaqué léger construit fuselage entièrement bâtie
• train d'atterrissage en fibre de carbone
• capot arrondi et couvert
• stabilisateurs Air-déjoué
• générateurs côté de force en option inclus
• ailes boulonnées

Spécifications:
Envergure: 1430 mm
Longueur: 1400mm
Poids Airframe (w / out électronique): 1225g

Comprend:
Bord 540T PPE / contreplaqué lumière ARF avion
Tout le matériel nécessaire

A besoin:
Votre propre 4 ~ émetteur et le récepteur 6CH
4 x Parc servos de taille (métal réducteur recommandé)
moteur brushless outrunner 42mm (4250 510KV recommandé)
50 ~ 80A brushless ESC
13x6.5 ~ 14x6.5 hélice
batterie 4-5s 14.8v 2200-2600mAh LiPoly

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Tony | Acheteur vérifié

  • Overall
  • Quality
  • Value

Very nice 3D plane

Sep 12, 2017

My setup experiments:
-Speed controller, Turnigy dlux 70A SBEC Brushless Speed Controller w/Data Logging
-Motor NTM 35-48 900kv, Propeller 13X6, Battery Turnigy nanotech 2650Mah 4S, 780W, 56A: Not enough power!
-Motor Turnigy Aerodrive SK3 - 4250-500kv, Propeller 14x10, Battery Turnigy nanotech 2650Mah 4S, 460W, 30A: Not enough power!
-Motor Turnigy Aerodrive SK3 - 4250-500kv, Propeller 14x7, Battery Turnigy nanotech 3300Mah 5S, 475W, 30A: Not enough power!
-Motor Turnigy Aerodrive SK3 - 4250-500kv, Propeller 16X10, Battery Turnigy nanotech 3300Mah 5S, 710W, 50A: Not enough power!
-Motor Turnigy Aerodrive SK3 - 4250-500kv, Propeller 16X10, Battery Turnigy nanotech 2200Mah 6S, 1600W, 80A: To much!
-Motor Turnigy Aerodrive SK3 - 4250-500kv, Propeller 14X10, Battery Turnigy nanotech 2200Mah 6S, 1000W, 48A: it could be better!
My setup: Motor Turnigy Aerodrive SK3 - 4250-500kv, Aerostar Composite Propeller 15x8 Grey (CW), Battery Turnigy nanotech 2200Mah 6S (45c/90c), 1350W, 60A: Perfect (for me). About 2150 gram airplane weight including battery.
With this setup, you cannot fly full speed because your wings are going to clap. But it's a 3d plane no racer… You have enough power left, very handy for starting 3d
My servo’s:
Aileron: Goteck GS-9257MG Metal Gear 450 Electric Digital Servo: not satisfied, very inaccurate!
Elevator/Rudder: JX PDI-2506MG 25g Metal Gear Micro Digital Servo: Its ok this servo, but I will not buy them again!
Servo’s from others references:
-RotorStar™ RS-3878MGT Digital Helicopter DS/MG Servo 25T 6.8kg / 0.12sec / 26g
-Corona DS329HV Digital Metal Gear Servo 4.5kg / 0.09sec / 32g
-HobbyKing™ HK-752MG Coreless Digital MG/BB Servo 6.3kg / 0.11sec / 28g
This is my personal experience and opinion!

Christian | Acheteur vérifié

  • Overall
  • Quality
  • Value

Super Modell , Nachtrag

Apr 02, 2017

zu meinem Vorbericht habe ich vergessen die Propellergröße anzugeben Nylon /Kohlefaser 15 x 8 Zoll E, außerdem möchte ich noch hinzufügen, dass zu meinen Flugfiguren auch Messerflug und Torquen gehören. Etwas Bauerfahrung ist allerdings erforderlich.

Christian | Acheteur vérifié

  • Overall
  • Quality
  • Value

Super Modell

Apr 02, 2017

Das Modell ist sehr passgenau und sauber verarbeitet und ist sehr robust.. Ich war überrascht über die super flugeigenschaft, es lässt sich sauber durch alle Figuren fliegen. Ich fliege das Modell mit einem Turnigy Blue Line 60 A Regler und Motor 42-48, 650 Kv, mit Akku Nanotech 2650 mAh, 4 S , 25-50 C . Fluggewicht 2100 g, Standschub 2900 g, 60 A. . Flugzeit überwiegend 1/2 gas 8 Minuten genug Reserve vorhanden, Endlich mal ein Modell bei dem alles stimmt

David | Acheteur vérifié

  • Overall
  • Quality
  • Value

Outstanding!

Mar 24, 2017

Excellent plane. Mine is 74 ounces (flying) on 2 x 2200 3S in series, turning a 14 x 7 prop via a Turnigy Aerodrive SK3 4250-500kv motor.

I hinged all my control surfaces very carefully using Blenderm tape on all the bevelled surfaces (they present a very large surface area for adhesion). The bevels were prepped with UHU Por beforehand, and allowed to dry. The top-and-bottom Blenderm hinges run the entire length of the hinge lines. Once the Blenderm is trimmed off flush to the wing surface the hinge is perfect, free and completely airtight. And completely invisible.

An excellent and delightful plane. A joy to fly.

suzygs1000 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2016

I have many planes but none as good as this. It is super light, and super strong! With the control surfaces wound back, it is a magnificent trainer, it is so easy to fly. I cannot fly 3d, but learning on this is easy, as it comes out of stalls very quickly, due to the large wing area and light weight. I have two of these, and don't really want another, but at this price, with free shipping, they should be selling like hotcakes!

Dirkson | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 19, 2016

Very nice plane! I love it! Everything is extreme stiff and a lot of carbon inside. It it my first Wood/EPP plane and I am impressed of the quality! Also the design is very nice! Good work Hobbyking!

solentlife | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 10, 2016

The model flies superb and will do everything you ask. BUT there is one VERY BIG problem with the model .... the lack of good hinge support for wing to ailerons. The manual shows the typical CA method of installing hinges. This is fine WHEN you have good material and support for hinge - but this model only has a ~1mm thin ply vertical spar in the leading edge of ailerons and in the trailing edge of wing for hinges to glue into. In front and behind is only EPP. Mild maiden flight and a few aerobatics pulled out one aileron and then second causing a serious crash. Model is now being rebuilt. RCGroups and Wattflyer have threads on this model. Trouble is typical RCGroups : 90pcnt of posts are just patting dealer on back and worthless piffle. Real meat of problems are not viewed nicely by them.
Glue those hinges in really well ... I suggest using Epoxy and get it into the slots BEFORE sliding in hinges. So it forms a blocker behind the ply spar. Well glued - model will be fine.
I fly mine on 4250 650KV Aerodrive motor and 5S 3000 LiPo with 13x8 prop. Unlimited vertical and near 2:1 Power to Weight. There is no need for 6S as RCG advises. 4S would be good for sport flying but needs a higher KV than 500~
Very good model let down by hinge areas of wings. So dock one Crown for design flaw.

Ulrich | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 17, 2015

The flying behaviour of this plane is excellent!
One of the best 3D-planes in this size I've ever flown. Over all comparable with my loved EF MXS64. No joke!
Take of weight with a 4s 3600mAh Lipo is 2,2 kg. I use a 16x8 wood prop with a 4248 650KV motor. The model is very neutral and have no wobble tendencies in harrier manoeuvres. Great knife edge performance and torque roll stability.
Highly recommended!

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires