Afficher : TOUTES CATÉGORIES 0 Modèles volants 1921 Avions 1086 Avions 145

La série Retro - Pioneer 1020mm OEB (PNF)

La série Retro - Pioneer 1020mm OEB (PNF)

32 La Revue

Prix:

Now save économisez 0,00 € 0,00 €

106,20 €

Déjà acheté Discontinued Product

Please continue searching for a similar product.

SKU:

9041000011

Livraison gratuite? Cliquez ici pour apprendre plus!

Partagez ce produit et gagner 600 points (5,31 €) [ ? ]

Description du produit

Le Pioneer est le premier dans la ligne de nouveaux modèles Retro Series superbes, cette nouvelle gamme rend hommage à l'ère RC et Freeflight Vintage lorsque les modèles étaient pratiques, robuste, simple, beau et toujours volé bien, la série Retro vous offre la chance faire l'expérience de cet âge d'or de la modélisation, mais avec tous les avantages de la fabrication tout à fait moderne et design!

Le Pioneer est fabriqué à partir difficile EPO et a été joliment peinte dans une couleur authentique "dope & tissu", il est également Plug & Fly, de sorte que le pré-équipés Brushless Outrunner & ESC remplacer l'ancien brûleur à mazout et à l'offre de la servo pré-installé vous contrôle total à quatre canaux. Il y a tellement de petites attentions, y compris le / plastique cadre en alliage arrière du fuselage, le moteur rotatif factice, mitrailleuse et fils appropriés alliage de gréement. Le métal / CF dans le transport est important et les grandes roues minces sont en mesure de lutter contre le plus rugueux des bandes sans drame. accès Reciever via un portillon pur sur le côté du fuselage et l'accès rapide de la batterie via la jolie imitation alliage capot. Le temps de construction est très court, même le système de gréement est simple et rapide, pas comme les vieux jours de la construction de plans, celui-ci ne prendra pas 6 mois pour obtenir dans l'air!

Le Pioneer est non seulement la partie, il vole la partie, la capacité de vol lent de ce modèle est tout à fait étonnant et parce qu'il est si "verrouillé", le Pioneer parvient à capturer l'essence d'un modèle Vintage beaucoup plus en vol. À son cœur, le Pioneer est un modèle de sport, le groupe motopropulseur a été bien pensé ce qui rend tout à fait capable de voltige de base comme des boucles, stalle tourne, rouleaux, etc, sans la nécessité d'une vitesse excessive de l'air. Le Pioneer est une grande qualité, amusants, modèle robuste et attrayant "vintage" avec un look vraiment authentique et sentir, prendre un voyage dans le passé avec la série Retro!

Caractéristiques:
Plug and Fly Format, ajoutez simplement votre propre récepteur et de la batterie!
Robuste EPO Foam
Construction de haute qualité et peint Terminer
Conception robuste et pratique
Vintage look authentique
Montage facile et rapide
Train Puissance Superbe / Airframe Solde
Peu coûteux à Get In the Air
capacité voltige
Taille du Parkflyer Parfait, vol Vintage sans avoir besoin de trimballer autour d'un Flightbox!
Parfait Poster Entraîneur Modèle

Spécifications:
Envergure: 1020mm
Longueur: 816mm
Voler Poids: 650g
Moteur: 1200kv Brushless Outrunner
ESC: 20A w / BEC
Servo: 9g x 4
Prop: 8x6

A besoin:
Votre propre 4 canaux TX / RX
Batterie 1300mAh 3s Lipoly

Spécifications du produit

Vidéos

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Discuter 0

Sujets

Trier par

Sujets les plus récents

Publier un nouveau sujet

La Revue

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

dilligaf | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Jan 19, 2015

What a great plane, after a bit of tweaking, ie, 27grms of weight in the front using stick on wheel weights recessed into the foam, 45pcnt throws on the elevator and 55pcnt throws on ailerons with 10pcnt rudder mixed, this thing is primo. It flies at scale speed and looks fantastic in the air, got a lot of comments from people, they thought it was balsa not foam. Well done Hobbyking, as in one of my previous comments, forget the wing wires and use black elastic cotton, looks great and less fiddly, holds tension all the time, enjoy you will not be dissapointed.

William | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Apr 26, 2014

It was my maiden flight today with this beautiful beast! First two flights were amazing, didn't have to trim or change COG. Everything flew perfect straight from the box. On the 3rd flight though, My mind blanked and i hit a the top of a tree. The tree was about 200m high and it just fell through the tree and eventually hit the ground. Guess what? was hardly any damage at all. Had to glue an aileron back on and the wing and that was it. The wing didn't even break, just the part you screw in. the fuselage wasn't even slightly damaged. Either this plane is extremely tough or i got extremely lucky. How many planes can fall 200m from hitting a tree and have hardly any damage to it? Definitely would recommend this plane to anyone!!!!!!!!

Denise | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Mar 12, 2014

Here is a video of the pioneer fighting it out with a SE5A.

https://www.youtube.com/watch?v=Z3D1jzKl0-4

Denise | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Mar 10, 2014

Great little' plane, that looks awesome both in the air and on the ground. It flies very well if and only if there is little to no wind. If there is wind, it becomes very unstable around its pitch axis. I wouldnt recommend this as a real beginners plane, while its forgiving, it has to be flown relatively fast (and in windless conditions).

Overall build quality is excellent and honestly stunning for the price. Mine did come with a rudder that was warped, but thats not a big deal. Apparently you can fix that by soaking it in hot water, but it didnt really impact the flying best I could tell. Assembly is almost no work at all, apart from the rigging wires. Pro tip: you can solder them instead of using those crimps.

THis pane is not overpowered, but motor and prop give it enough power to fly this "scale" with some reserve to get you out of trouble. Just right IMO. Pitch authority is a bit too good, dial it down on your radio or use a lot of expo. You probably also want to mix throttle with elevator to avoid the infamous nose drop if you cut the throttle, although I found that problem not as big as most people claim. You will want to put some weight in the nose to get the cg right.

User manual is a joke. But who needs one with this?

All in all, Im quite pleased with this plane. Its not quite as easy to fly as I imagined, doesnt fly as slow as I hoped (even with flaperons),

bushman-tim | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Feb 28, 2014

My Pioneer parcel arrived the other day and with excitement I couldn't wait to get inside. Everything was great all parts there and no damage from shipping from Hong Kong. The build was easy as really, the wiring was the time consuming bit, but is easily done with patience. Looks very nice when built. The CG is 46 mm from front (leading edge of wing) now I put a texture mark to balance point and it was still way too tail heavy even with the 1300 lipo in! I ended up needing about 45 grams of extra weight I put some lead inside the slot on underneath (behind the motor cowl) mount. Then she was balanced good. I maidened her on one of my Towns smooth open dry slat lake beds and she was a charm to fly! I did need a bit of up trim but it fixed fine once trimmed! I Get about 8 minutes on the fully charged lipo. Just remember the extra weight and this plane is a beauty!

shahn | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Jan 31, 2014

Nice build, wires are hard to keep tight but not bad. Hard to fly though. Agree with other posts not a slow flyer at all. Not a plane for beginner. Keep to j3 cub if u want a trainer

darren & Shaun | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Jan 10, 2014

Very happy with product and delivery time. Well made great looking no issues with lining up or placement of parts, can't wait to get her up.

Chris | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Jan 03, 2014

Received my Pioneer this morning, fast delivery from NSW warehouse. Downside was no screws for attching the tail and not enough tubes for crimping the wires on. Battery placement will be tight, theres a lot going on in there. I am expecting flight to be as good as the write ups, will post more after I have acheived that.

Geronimo | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Dec 15, 2013

It's not a beginners airplane, flies well, but a little "nervous", have to "play" with c.g. Position, dual rates and expos, to make it less "unstable". After that,I managed to fit a 3s, 2200 mAh battery for longer flight times and better stability,due to more weight in the front. Loops and inverted flight, ok.
The landing gear is a little weak, but the price, for an airplane with servos, esc, motor, etc. is very good!!!

robert | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Nov 20, 2013

I too ordered Sunday and it arrived today, tuesday. It was extremely well packed with a nicely retail printed artworked box, inside another bigger plain box. Perfect if you want to buy it for a present. The contents are well spaced, secure and all arrived completely free of marks or damage. It has a beautiful finish completely in keeping with the models 'Retro' look. All the installation is done bar the receiver just as listed. The EPO foam is dense and thick in the places it should be. The fuselage is stronger than it looks and I imagine will take many knocks. Tools you need are inside so assembly on a desert island is assured. One bad bit, the dummy rotary engine is made of ordinary foam and I will glue a piece of card inside it to secure it before the lower cylinders break off. Assembly is easy and I have it hanging up in our back room already. This is the 3rd aeroplane I have had from Hobbyking and as time has gone on they have got better and better this being the best so far. I will fly it but I think letting potential buyers know just how good this is now before they go out of stock. For 68 quid delivered its brilliant. Thank you again Hobbyking.