S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • USA

TowerPro 4130-8T 425g / 352kv / 72A Brushless Motor

TowerPro 4130-8T 425g / 352kv / 72A Brushless Motor

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
450 g
SKU:
TP4130-8T
Description
du

TowerPro 4130-8T
Cela fait partie de towerpros nouvelle race de moteurs.
Amélioration de roulement et de la qualité de l'arbre ainsi que stator tordu et la conception de l'aimant.

Spec.
Taille: 51mm Diamètre x 89.2mm Longueur
Poids: 425g
Idle: 1.2A
Recommende Lipo Config: 6-8 cellules
Constant: 352Kv
Diamètre de l'arbre: 6mm
Max Efficency: 57A
Max charge: 72A
Max Power (W / 60): 1700
Suggestion Prop: 16x10


Moteur est livré avec un alliage solide montage plaque et spinner adaptateur représenté (type pince). vis sans tête et des arbres de retenue peuvent être desserrées pour inverser l'arbre pour montage pare-feu différents endroits.

Product
Specifications

Informations supplémentaires

  • Référence:
    TP4130-8T
  • Brand:
    Non communiqué
  • Poids (g)
    450.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
motor is a quqlity product with nice appearance and can swing a 17/10 prop with authority on 6cA 123's

I will fly this in a 7lb P40 Warbird
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent motor, same exact efficiency, size and performance as an AXI 4130-20.. used it to replace a burned up AXI in my 9.5lbs P51. See this thread for details:

http://www.rcgroups.com/forums/showthread.php?t=660928&pp=50



With a 10s1p pack of Dewalt A123 cells and an APC 13*10 electric prop it used 43Amps at 28volts, 1200 watts. Simulation was pretty close to actual results, use Kv=352, Io=1.2A, Rm=99mohms... for the A123 lipos use voltage=3.35V, 8mohms resistance, 2300mah capacity. Excellent motor for the 60-90 size plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor looks really nice. Put an APC 18x8 on with six Emoli cells. At 31 amps it was getting just over 5000 rpm producing over 7 pounds of thrust. With 6S 4400 mah I expect to go a bit faster but it is perfect for the five pound 3D job it is targeted for.



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I mounted this motor on my Hanger 9 Funtana 100 X today and was very pleased with the power. My static test showed more than 1700 watts on an 8S 4000 mah battery at 60 amps swinging a 17x10 apc prop. The plane is 8.5 pounds so it should be balistic! Will be flight testing this week.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put this motor on a Sig HogBipe and with 6s2p A123's and of to the heavens I went. All I can say is no more AXI's for me. TowerPro motors are my choose of motors for now on. Top notch motors.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor, this thing cranks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Might be a bit of overkill on a .46 size plane but pulls like a train on 7 a123 cells with a 15x13 prop. 40A at approx 17 volts = unlimited verticle!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ulrich, it is possible to mount it backwards.. loosen the two set-screws and the wheel collar and slide the motor shaft forward.. apply blue locktite and re-tighten set screws. It is a tight interference fit so you may have to gently tap it with a hammer to get the shaft to move.

Limit this motor to 1200 watts in a sport plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tested this motor with 6 Lipo cells and 8 cells.



With 6 cells and using an 16x10 APC Prop the motor had 6.000 revolutions by using 35 A





With 8 cells and a 15x10 glow prop it had 9.000 revolutions and draw 45 A.



Great motor, for good price, no backward mount possible if needed
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ecellent !

Mes mesures :



6S2P HXT2250, contrleur Pentium60 APC-E 16x8 30,5A 6060tr 640W

Forte bois 16x8 32,2A 6060tr 675W

MPX Bois 16x10 34A 5880tr 715W



8S2P HXT2200, contrleur Pentium 80HV APC-E 14x10 36A 7600tr 1000W

Grp bois 15x8 32A 8000tr 900W

Forte bois 16x8 42A 7100tr 1200W
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.