Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

TowerPro Brushless Outrunner 2408-21 Delta

Generating Links

TowerPro Brushless Outrunner 2408-21 Delta

Prix:

Now save économisez 0,00 € 0,00 €

9,57 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
TP2408-21XXXX
Livraison gratuite? Cliquez ici pour apprendre plus!

Pour 2-3 Li-Poly cellules (7.2-12.6V)
accessoires recommandés: 8 x 4, 9 x 4 Flyer lente
31 mm de diamètre x 62 mm de longueur
Courant maximum: 13A
Poids: 50,2 grammes / 1,77 onces (tout montré dans l'image, y compris gris engrenage boîte logement)
Livré avec bâton monter cadre en plastique
Pare-feu capable de monter
Livré avec deux écrous prop et une rondelle
diamètre de l'arbre 3mm
10mm x 10mm bâton monter
Kv: 1750
9 Stator Polonais, 12 Magnets

Configuration: Hélice: volts: Amps: Poussée:
direct Drive 8040 7.4V 8.2A 12,0 oz / 342,86 grammes
direct Drive 8040 8.4V 8.6A 13,8 oz / 394.29 grammes
direct Drive 8040 9.6V 11.1A 17,0 oz / 485.71 grammes
direct Drive 8040 11.1V 13.1A 21,0 oz / 600 g

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Andrew Ford | Acheteur vérifié

  • Overall
  • Quality
  • Value

2408-21

Nov 14, 2007

i also run this motor in my artech cessna and love every minute flying this plane with it!!

ive got the plane trimmed out nicely and the weight ive saved gives me great flight performance and the batts run cooler AFTER the flight than they do before the fly!!!so much so...im gonna buy another for my next project!!!!

Graham Beggin | Acheteur vérifié

  • Overall
  • Quality
  • Value

TP BM2108-21

Nov 14, 2007

Great little motor, powering 500g parkflyer with 8x4 prop on HTX 1000mah 3s. Too powerful really but great fun. Much more power, efficiency and thrust than speed 400 used before. Spare shafts are available from UH for those woops moments.

Hustav | Acheteur vérifié

  • Overall
  • Quality
  • Value

2408-21

Nov 14, 2007

I powered my Wingo with this motor. Now, it has more power than it had with the stock speed 400 can motor. I am still using the stock propeller (125/110mm, 4.9x4.3in) and the motor is pulling 8 amps, full throttle. A nice hint is to use a little of thread locking on the screws that hold the motor (moving part) on its base. Without thread locking, these screws become loose and the motor vibrates a lot at high speeds.

Philippe Lafabrie | Acheteur vérifié

  • Overall
  • Quality
  • Value

2408-21 Delta

Nov 14, 2007

using it on a 600G 120 cm zagi delta with 12C 1500 mAh 3S Lipo.



7x5 APC propeller -> 13 A

8x6 APC propeller -> 19 A



The 7x5 propeller is the better choice in my configuration.



Great product at incredible price !

Marvin Bunter | Acheteur vérifié

  • Overall
  • Quality
  • Value

BM2408-21 Outrunner

Nov 14, 2007

I also run one of these in an Art-Tech Cessna 182 with GWS 8x4.3 prop and 3S LiPo The plane will take off in about 1 meter and climb vertically. Great performance at a budget price!! I have also installed one on my GWS Slow Stick and with a 3S LiPo it will also climb vertically from a 1 meter takeoff!! HIGHLY RECOMMENDED UPGRADE FOR ANY SMALL PARKFLYER!!!

Chris | Acheteur vérifié

  • Overall
  • Quality
  • Value

Good power

Nov 14, 2007

I have been using one of these in a ArtTech Cessna 182 with a APC 8x4 prop. Power and performance are really excellent and you can not beat the price.

Tobik | Acheteur vérifié

  • Overall
  • Quality
  • Value

Small and strong

Nov 14, 2007

Here are my rough results of test using kitchen scales and 2 cell LiPo.

GWS 8x4 350g (200g/8A)

GWS 9x4.7 450g (350g/8A)

GWS 10x4.7 >600g (450g/8A)

Aer 8x4.5 300g (200g/8A)



A

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!