TowerPro Brushless Outrunner 3015-7 1000kv / 470W

• Overall
• Quality
• Value

Customer Rated

Jun 18, 2012

muy buen motor,lo instale en un wing tiger de art-tech,las alas tienen 1.38mts.(54"1/2)peso(35.2oz).esc hk-60amp.bat 1.8amp. 3 celdas.el ascenso es rapido,tiempo de vuelo 10min.aprox.supera al motor original por un rato largo.helice de 10x4.7slow.el avion vuela placenteramente.no produce vibraciones.la temperatura es baja y tolerable al tacto.lo recomiendo.satisfaccion garantizada.

• Overall
• Quality
• Value

Customer Rated

Mar 26, 2012

Dieser Motor ist Schrott.
Kaufte total 6 Stk. Allgemeines Problem: Unwucht, und zwar gewaltig. Die Lager machen das geschlage und geeiere nicht mit, und werden zerstrt. Auch bertragen sich die Vibrationen auf das Modell, was auch kritisch bis gefhrlich sein kann. Ich hatte noch nie einen Motor, wo die Glocke so stark eiert und schlgt! Die Magnete halten innerhalb der Glocke sehr schlecht und verrutschen....Also Finger weg davon! Ich schmeiss jetzt die 6 Motoren ins Altmetall. Da gehren sie hin.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 29, 2011

Esteticamente non bellissimo, ma una vera potenza.

Aesthetically it is not beautiful, but it is a real power

• Overall
• Quality
• Value

Customer Rated

Oct 08, 2011

Good motor.



quiet motor. be carefull with the long screws.

Ordered 2 motors. One hat a brocken wire inside after a few flights. Still working.



340 Watt&#x2F 29,4 A at Zippy 2200mah&#x2F40C with 11x5.5 Prop.



Build it in a MPX Gemini. Has enough Power, but could also be more. This motor is between the standard and the tuning setup that ist recommend by mpx.



A other prop could make it faster...

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 17, 2011

good motor although before runing it take the time to take it appart and make sure all magnets are well glued, if they aren't a bit of ca will do the trick.

Other then that plenty of power good motor.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 23, 2011

Strong motor. very eassy to change the shaft.Delivery a lot of power wiht 3s, 14x4 APC and 2200mAmp-60 Esc

• Overall
• Quality
• Value

Customer Rated

Aug 19, 2011

Had this motor for two years. I did the required glueing and trimming of the mount screws and love it. Originally used on 3cell, but I recently put it on an edge 540 with an all up weight of 3.5 lbs. Using a 55amp turnigy delux esc and a turnigy 2450 4cell 30c battery. She is airborn in about 8 feet with great vertical. Will hover and do what ever you like. I get about 8 min flight time and the motor and esc are only slightly warm. Great job hobbyking!!!

• Overall
• Quality
• Value

Customer Rated

Aug 07, 2011

I bought this for my Yak54. It was 1/3 the price of the recommended rimfire motor.It mounted near perfect as a drop in alternative. Has plenty of power ,runs very smooth.I think its a little heavier but not much I had to add about 1/2 0z of lead to the tail to balance plane even after I modified the battery compartment so i could move it aft as far as possible.I am very pleased with the purchase. I am running a 11 X4 prop 1800 mah 3cell 40cw/ turnigy deluxe 55amp esc.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 25, 2011

Excellent Product, At the best price AAAplusplusplus

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 08, 2011

Excelente Motor,uso em um calmato de isopor tamanho 1x1,20 de asa com bateria 2200 mah, ESC TowerPro H40A Brushless Speed Controller.Tempo aproximado 8 a 10 minutos.