Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

TR 35-48-C 800kV Brushless Outrunner Eq: AXI 2826

Generating Links

TR 35-48-C 800kV Brushless Outrunner Eq: AXI 2826

Prix:

Now save économisez 0,00 € 0,00 €

14,46 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
TR35-48C-800
Livraison gratuite? Cliquez ici pour apprendre plus!

TURNIGY AerodriveXp

Modèle: TR35-48-B
Tension d'entrée: 7.4V ~ 18.5V (2 ~ 5S Li-po)
Kv: 800 tr / V à moins de 10%
Capacité actuelle: 55A / 60s
Dimensions: 35mm X 55mm / 1.38in X 2.17in
Diamètre de l' arbre: 4 mm / 0.16in
Poids avec câbles: 163g / 5,75 oz
Nombre de pôles / aimants: 14
Poids du modèle recommandé: 1500 ~ 2900g / 52 ~ 98 oz
Puissance équivalente: .30 à moteur luminescente .35
Stator Dimentions: 28x26mm

ESC suggérée: 60A
Prop suggérée: 11x6

  • Kv ( rpm / v) 800.00
  • Max Current (A) 55.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 18.00
  • (W ) 0.00
  • Arbre A ( mm ) 4.00
  • Longueur B ( mm ) 48.00
  • Can Diamètre C ( mm ) 35.00
  • Longueur Can D ( mm ) 32.00
  • Longueur totale E ( mm ) 67.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

JJaypops | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 05, 2012

I purchased the TR 35-48-C for my 72" Aeronca Champ. I have a 14x8 prop on it with a turnigy plush 60 amp esc running with 2 Rhino 3S 2200 mah packs connected in parallel. This setup can get this going almost vertical, plenty of power! This motor has got quite a range on it. When I took the plane to the field my buddies said the motor was too small for the plane and it wouldn't fly, but when I hit the throttle boy did she go. Overall a great motor at an even greater price

kebwalid | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 29, 2011

i use it with a 12x6 propeller slow fly for a plane 125cm and 1.3kg with 3s 2700ma and 3000ma the motor and the battery are just a little warm but very little .it can fly for 8 to 10mn i try it also with a 13x8 without any probleme alls are a little warm and not any more .for my i can give it 10/10.

nn | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 30, 2011

Pour prolonger la vie de ce moteur:

Enlevez le clip sur l'axe principal. Puis la ou les rondelles en bronze. Ouvrir le moteur.

Coller avec loctite 401 les fils en cuivre pour eviter que les vibration ne cassent ces fils.

Mettre de l'huile fine dans les 2 roulements a billes. J'ai achete 5 moteur TOUS les bearings etaient secs!

Utilisez de la loctite 243 pour la vis qui retient l'axe principal.

Meme chose pour les vis du kit d'helice.

Benjamin | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 27, 2011

Equiped my 3Kg Ka6 3,2m glider with 4S and 13*6.5 folding prop which gives a very confortable climing rate and low electron consumption (over 5 min of full throtle with 4S 3000 mah)

Excellent setup for that type of application. After more then 50 flights quality is perfect.

jesusvillaa | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 23, 2011

Prbndolo con la pala 11-8 el mejor rendimiento con lipo 5s

Client | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 22, 2011

This is a wonderful motor for electric sailplanes, 3 or 4 cells (depending on power you would like to get). I have 2 of these in use. One uses a 3 cell (2200) pack, 13x6.5 folder (APC) and draws about 20A. The other is a 5lb plus, 135" wingspan sailplane that uses a 14x8 prop, 4 cell pack (4000mah) and draws about 45A.

The only caution i give is that the windings should be checked prior to running. Two of the ones i have (I have 4 of these) were very loose, I pushed the wires down and put a little cyanoacrylic glue on them.

tod hetherington | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 03, 2011

Type your review here.

Try to include as much data as possible.i have used this motor in a austars .30 size tigermoth with a 4 cell 3600 liop and a hobbyking super simple 40-50 amp speedcontroler and a turnigy 12x6 wood prop heaps of power and and a excelent motor.

jostafew | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 09, 2011

Bought this to replace the stock geared drivetrain on a Parkzone Typhoon 2 and it worked great, good power and KV selection. The prop shaft (bolts on the front of the motor) was a little out of true, but wasn't an issue in service. I was very happy with this until I stuff the plane in the ground and bent the motor shaft, now I'm buying another one!

kraken | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 08, 2011

idealni pro 2 kg stihacku epp

sandro silva | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 28, 2011



Motor mostruoso extremamente forte usando 11x7 MasterE 4s 3kg de empuxo simplesmente muito bom!!Recomendo...

Fichiers clients
AT-27 Tucano Download [35]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!