New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

TrackStar 1 / 18ème du réseau électrique Echelle 12T Brushless (de 5050kv)

TrackStar 1 / 18ème du réseau électrique Echelle 12T Brushless (de 5050kv)

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

32,99 €
Statut:
En stock.
SKU:
9052000006
WANT FREE SHIPPING? Click here to find out more!

la performance de TrackStar maintenant vient dans facile de sélectionner package Combo!

L'utilisation d'un MCU rapide Silicon Labs et de haute qualité On-Semiconductor MOSFET l'TrackStar 18A ESC établit une nouvelle norme de haute qualité encore CES de voitures abordables. Avec la logique MCU Intelligent CES série TrackStar permettent une grande précision de démarrage de contrôle et d'alimentation de positionnement arrière du moteur. Combiné avec le moteur de qualité 4 pôles, cela se traduit pour commencer très lisse et l'accélération et de couple.

Le Turnigy TrackStar 18A ESC dispose également d'une multitude d'options de programmation ne retrouve habituellement pas dans un CES de cette taille et peut être programmé avec facilité via la carte de programmation Turnigy TrackStar (vendu séparément)

Spécification ESC:
Cont. Courant: 18A
Burst: 25A
Taille du véhicule: 1 / 18ème
Batterie: 2-3 cellules Lipo / 4-9 cellules Ni-XX
L-BEC: 5V / 1A Sortie
Type de moteur: Brushless Sensorless
Taille: 30 x 26.1 x 13.8mm
Poids: 26g (y compris les fils)
Moteur Prises: Type 3.5mm Bullet
Branchez Batterie: Requis
Interrupteur marche / arrêt: Oui
Revers: Oui

Spécifications du moteur:
Active: 12T
Valeur KV: 5050KV
Polonais: 4
Diamètre: 21.5mm
Longueur du moteur: 37mm
Prolonger diamètre de l' arbre: 2mm
Longueur de prolonger l' arbre: 11 ± 0,5 mm
Poids: 60g
Pas de chargement @ 7.2V: 2.2A
Courant max: 34A
Résistance (Ω): 0.027Ω
Plage de la batterie: 2 ~ 3s 7.4v ~ 11.1v
Température de fonctionnement: 80 °
Température maximale 130 °
Échelle de voiture approprié: 1/18
Approprié ESC: 25A
Epaisseur de lamination: 0.2X20mm

  • UGS 9052000006
  • Brand TrackStar
  • Poids 145.0000
  • Longueur 130.00
  • Packaging Width 35.00
  • la taille 110.00
  • Kv ( rpm / v) 5050.00
  • Max Current (A) 34.00
  • Résistance ( mh ) 0.12
  • Max Tension (V) 8.00
  • (W ) 220.00
  • Arbre A ( mm ) 2.00
  • Longueur B ( mm ) 38.00
  • Diamètre C ( mm ) 22.00
  • Longueur Can D ( mm ) 36.00
  • Longueur totale E ( mm ) 49.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Slapped one of these into a Team Associated RC18T and a Team Losi Mini T. Great power and coupled with the programming card this makes a great setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Slapped one of these into a Team Associated RC18T and a Team Losi Mini T. Great power and coupled with the programming card this makes a great setup.

Installed this onto a HPI rs4 with some slight mods to chassis, absolutely weapon of a vehicle and very impressed overall!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed this onto a HPI rs4 with some slight mods to chassis, absolutely weapon of a vehicle and very impressed overall!

Great power system I use in my micro rs4 it's very fast you will need to get 2.5mm bolts for mounting motor and drill the motor mount holes out cause stock bolts are 2mm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great power system I use in my micro rs4 it's very fast you will need to get 2.5mm bolts for mounting motor and drill the motor mount holes out cause stock bolts are 2mm

I put this in a LaTrax SST 1/18 truck. Unbelievable performance for the money. Suuuuuper fast on a 14t pinion, but gets hot - on a 80F day, motor measured 160F and ESC measured 130F after a 10 minute run. 13t pinion would be better for bashing and not worrying about temps. (or get the lower KV version of the motor) Not quite drop in - you need to provide your own motor mounting screws, and some dremeling is required on the aluminum motor mount (holes on the LaTrax motor mount are a little too far apart and there's a ridge you need to grind down) Don't bother with the programming card, mine runs perfect on stock settings. I'm running a 2000mah 2s receiver pack - PRODUCT ID: 9210000043 - and with a minor dremel mod to the battery tray it's a PERFECT fit. After a 10 minute run each cell still has 4.0 volts. Top notch!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put this in a LaTrax SST 1/18 truck. Unbelievable performance for the money. Suuuuuper fast on a 14t pinion, but gets hot - on a 80F day, motor measured 160F and ESC measured 130F after a 10 minute run. 13t pinion would be better for bashing and not worrying about temps. (or get the lower KV version of the motor) Not quite drop in - you need to provide your own motor mounting screws, and some dremeling is required on the aluminum motor mount (holes on the LaTrax motor mount are a little too far apart and there's a ridge you need to grind down) Don't bother with the programming card, mine runs perfect on stock settings. I'm running a 2000mah 2s receiver pack - PRODUCT ID: 9210000043 - and with a minor dremel mod to the battery tray it's a PERFECT fit. After a 10 minute run each cell still has 4.0 volts. Top notch!!

excellent combo ,I installed it on my xray m18, and it fits very well and runs excellent

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent combo ,I installed it on my xray m18, and it fits very well and runs excellent

Parfait pour mon CR 1/16

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Parfait pour mon CR 1/16

This esc and motor combo is the exact same as the toro with a different brand name. this motor works great with the Dromida Rc cars by Revell. it is a direct drop in and it is plenty fast. i have yet to experience any issues with it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This esc and motor combo is the exact same as the toro with a different brand name. this motor works great with the Dromida Rc cars by Revell. it is a direct drop in and it is plenty fast. i have yet to experience any issues with it.

I chose this middle power version (TrackStar 1/18th Scale 12T Brushless power System 5050kv) for my RC18T2 build and I would have taken the lower kv one, but it was out of stock. Quality seems great and price is very resonable. Only time will tell how it handles all the torture I'm gonna put it through.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I chose this middle power version (TrackStar 1/18th Scale 12T Brushless power System 5050kv) for my RC18T2 build and I would have taken the lower kv one, but it was out of stock. Quality seems great and price is very resonable. Only time will tell how it handles all the torture I'm gonna put it through.

Took two weeks to get it from Hong Kong to the US, but worth the price and wait. My RC18B2 is way faster and smoother than the factory brushed motor setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Took two weeks to get it from Hong Kong to the US, but worth the price and wait. My RC18B2 is way faster and smoother than the factory brushed motor setup.

This combo is perfect for 2s lipo on ftx colt and ripmax jackal 1/18, standard gearing,nice temps, good speeds, easy to install just need to solder your chosen battery connecter, motor runs a little too hot on 3s after a while, would need some kind of heatsink and fan,to be honest the speed from the 3s is too insane, flips from a stand still!good for a few speed runs just moniter temps.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This combo is perfect for 2s lipo on ftx colt and ripmax jackal 1/18, standard gearing,nice temps, good speeds, easy to install just need to solder your chosen battery connecter, motor runs a little too hot on 3s after a while, would need some kind of heatsink and fan,to be honest the speed from the 3s is too insane, flips from a stand still!good for a few speed runs just moniter temps.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save