Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

TrackStar 380 Sensorless moteur brushless 4400KV

Generating Links

TrackStar 380 Sensorless moteur brushless 4400KV

Prix:

Now save économisez 0,00 € 0,00 €

31,68 €
Expédié de:
  • USA
  • Global
Déjà acheté
Heure d'arrivée estimée: Aucune Heure D'arrivée Estimée [ ? ]
Statut:
Epuisé!
SKU:
9192000290-0
Livraison gratuite? Cliquez ici pour apprendre plus!

moteurs TrackStar juste sont bien connus dans la communauté RC pour peformance et les derniers 380 de ne font pas exception. Ces moteurs brushless sensorless ont des roulements de précision, aimants correctement notés, rotors équilibrés et de qualité premium arbres en acier.

Ces moteurs sont parfaits pour 1/18 ou 1/16 véhicules de taille avec beaucoup de puissance à revendre.

Avec les moteurs de Trackstar vous pouvez être assuré que la qualité et la performance n'a pas été compromise et que ces moteurs représentent une valeur exceptionnelle.

Caractéristiques:
• à remontage manuel pour le remplissage de cuivre maximale.
• rotor de précision équilibrée stimulera la performance de l'efficacité et de la puissance du moteur.
• nickelé néodyme rotor pour une accélération maximale du moteur, la puissance de freinage et de la performance dans des conditions de haute température.

Spécifications:
KV Moteur: 4400
Max: 28A
Puissance: 216W
Recommended ESC: 45A
Max Voltage: 11.1V / 3S Lipoly
Case Length: 37mm
Affaire Dia: 28mm
Bolt Espacement des trous: 16mm et 19mm
Shaft Dia: 3.17mm
Longueur totale: 51.5mm
Poids: 86g

  • Kv ( rpm / v) 4400.00
  • Max Current (A) 28.00
  • Résistance ( mh ) 28.00
  • Max Tension (V) 12.00
  • (W ) 216.00
  • Arbre A ( mm ) 3.17
  • Longueur B ( mm ) 37.00
  • Can Diamètre C ( mm ) 28.00
  • Longueur Can D ( mm ) 36.00
  • Longueur totale E ( mm ) 52.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Eike | Acheteur vérifié

  • Overall
  • Quality
  • Value

Great Motor for Losi Mini 8ight

Sep 23, 2017

I am running a few of these motors with different windings depending on the speed I need in my Losi Mini 8 Buggie (1/14) together with the track 60A ESC.
This works really well for the complete season now. The setup uses Nanotec 1800mAh 2s 60c
The setup I run most is not the fastest but I run it in the garden on the lawn which is quite high load on the motor. My track in the garden at least fried the original Mini 8ight drive but the Track 380 workes well through out the whole summer now.
The mentioned shaft is 3,17mm like named in the specs. The motor fits tight into the mini 8ight but it works out. This also gave me the chance to change the pinions in the Mini-car to the ones I always use. Shaft diameters below 3,17 are crap anyway. The 3,17mm shaft and the existance of cooling wholes were the reasons why I bought this motor as a replacement for my mini 8ight.
The cooling system seems to work and keeps the motor alive :-)

Jeff_the_Ripper | Acheteur vérifié

  • Overall
  • Quality
  • Value

FANTASTIC motor for my Losi Mini 8ight - INSANE!!

Aug 09, 2017

First of all, thanks to Jeffery below - helpfull review!
The motor from my m8ight is broken and time to look for a good value motor.
I've decided to keep the orig. ESC from Losi and it works great.
I've ordered following hop-up to fit the TS380 in my Losi Mini 8ight:
- Exotek Racing_Big Bore Motor Mount
Changed to a steel spur gear and pinion:
- Hot Racing 56t gear
- Hot Racing 18t pinion
The power is insane, steel is must have!! I drive principal with 2S and he is soo fast, with 3S incredible INSANE. (Motor Temp. 60-75C)
Jeff

Jeffery | Acheteur vérifié

  • Overall
  • Quality
  • Value

Working great so far in mini 8ight-t

Nov 18, 2016

I put this in my Losi mini 8ight-T, using an exotek big bore motor mount, perfect fit. Hotracing makes a hardened spur and pinion, I chose 60/12 and everything fits and works without modification. I paired this motor with the trackstar 30a esc, and temps stay around 100 degrees F. So far, couldnt be happier, this combo with 3 cell lipo rips!

BlackJcz | Acheteur vérifié

  • Overall
  • Quality
  • Value

Super Motor for LC Racing 1/14

Oct 29, 2016

I Use this as a repalcement in that 1/14 Buggy and rally car and it fits well. Motor is powerfull I use it on 2S lipos.

Only small con for that motor, it does not have a face under pinion Screw

xemcfax | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 05, 2016

Motor does not fit a LaTrax 1/18 short course truck the shaft is to big and the will not mount in the motor mount that is standard on 1/18 scale vehicles. my loss good looking motor.

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!