Turnigy X5S 3D Printer (EU Plug)

• Overall
• Quality
• Value

Turnigy X5S

Dec 12, 2019

Good 3D printer for the price

• Overall
• Quality
• Value

Turnigy X5S 3D nice printer for its price

Nov 20, 2019

nice printer for its price.
In the beginning I had some problems with poor soldering of a thermistor to the extruder.
repaired it my self after some measuring and searching.
the extruder itself did not run well on its guide, the wheels clamped around too hard, causing them to press in and run even worse.
the solution release the two-wheel bolts a little until everything runs smoothly.
the stepper will thank you for it as well as the toothed rubbers that adjust everything for printing.
quality does not deserve all the stars because the material from the factory was not 100 percent, but after the correct adjustments I do not know if there is a better one for its price.
In the meantime, the printer has already printed many hours without any problems.
a must is the stick to rub in the bed for printing this ensures sufficient hold to the bed and after printing the piece still comes off easily
don't forget to adjust the print bed well and check it regularly, especially if you move the printer.

• Overall
• Quality
• Value

Bonne machine

Jul 18, 2019

Reçu rapidement ,en bonne condition,c' une x5s de base,fonctionne correctement d'origine,mais c' une machine a dire évoluer,une bonne base de cubique,peut-être pas en première imprimante pour les non bricoleur....

• Overall
• Quality
• Value

imprimante 3D

Jul 08, 2019

très bonne machine 3D qualité au top et beaucoup de pièces détaché en références

• Overall
• Quality
• Value

Want a real ***big*** printer?

Nov 13, 2018

This printer is just so ***unbelievable***. I ordered this printer cause its X-Y-Core-technology and the big printing area, but did not check how big the complete thing will get when assambled. It is a box of about 70 cm in width,length, height, and i am glad that it fits on my desk just beside my computer workstation.
The build of this printer was not too much work, i used both the video and the instruction manual cause some things are not that clear described.
The printing borders are not that big as described without tweaking, the heated bed has a size of 330x330mm, but you need dove clamps to fix the epoxy-plate, so you are not able to print this complete. I think 300x300mm is a size that can be reached, perhaps a twaeak of the limit switches for x and y are needed.
The height of 400mm can also not be used without problems. you have the heatbed screwed to the z-axis, and even if you put it to lowest position with the wing screws, i only achieved a size about 390mm. You can tweak here by using an other position for mounting the display and using different connections for threaded rods and motors.
But even with the limitation to 300x300x390, this is a gigantic size for a printer sold for only about 300 Euros.
The printer cries for addons, the use of an other hotend for use of soft material, by example. It is a good idea to change two of the coolers, the little coolers are loud and may be changed to bigger coolers which are not whining that loud.
I really recommend this printer to anybody who wants to use 3D-printing and is not interested in a printer for dummies.