TURNIGY 1: 4 Châssis en alliage GoKart Brushless Scale (kit)

• Overall
• Quality
• Value

Customer Rated

Jul 15, 2013

Awesome value for a lot of car. I have 2 matched cars for duking it out with my brothers and buddies. This car goes like crazy. Other than a few loose screws the build quality was very good.

• Overall
• Quality
• Value

Customer Rated

Apr 23, 2013

You can see my video of this go kart at http://www.youtube.com/watch?v=C5QFfJ0OOAE

I enjoy the challenge of driving it and pushing it to its limits. The driver figure adds a lot of detail and makes it interesting to drive. I've put a few hours of run time on it so far and haven't had any problems. During the initial unboxing I had to fix and adjust a few things on the chassis, but overall I'm pretty happy with the purchase.

• Overall
• Quality
• Value

Customer Rated

Feb 28, 2013

image here . . .
<a href='http://www.hobbyking.com/hobbycity/store/uploads/741571200X5758X38.jpg' target=_blank></a>

• Overall
• Quality
• Value

Customer Rated

Feb 28, 2013

PLEASE READ THIS! I found a rather disconcerting design flaw in the kart. I took the motor mount apart (off the kart) to check how I could somehow fabricate a new universal motor mount (meaning it will take in either a 380 or 540 size motor (2-in-1) . . . as I was inspecting the face plate where the motor mounts up - I found a "step" in the bottom part. I uploaded the image in the "FILES" for you to see. If the image doesn't show, just unscrew your motor and check if indeed your kart has this "step" as I refer to it.
I am assuming that this goes with all 3 versions of the kart offered here, meaning, all karts have this design flaw.
This "flaw" will cause premature wear (I may be wrong but common sense dictates otherwise) as the motor is mounted in a slight downward angle and goes against the correct spur to pinion meshing. I assume that this also causes a slight binding and makes the motor work a few percentage harder.
I do hope HK reads this and corrects this design flaw.
Wether you agree with me or not, you can't say nobody informed you.

• Overall
• Quality
• Value

Customer Rated

Feb 12, 2013

Stig jr. needs to go back to Kadet Class and stop messing arund with older brothers Formula Kart. Seriously! He's too small which explains why he can't rech the pedals and slumped forward from trying to reach the wheel. Hope can find a new driver for it.
The side pods are over-extended and too short for my liking . . need to fix that!
The rear live axle is also too wide. Will try o hav a machine sjop d some cutting of th axle.

Overall? it's okay, cosidering it's price. Though shipping killed me at customs. Hope thay can be able to send it via regular air mail

• Overall
• Quality
• Value

Customer Rated

Oct 10, 2012

I have 3 of these for the small price i figured get a spare one just for parts, i used the HK donkey 4200kv motor on 1600mah 3s with trackstar 60a ESC stupid fast cannot get to top speed just overpowers the tyres and spins out. tyres are nice and sticky. Surprisingly very strong i pictured hitting the kerb and bye bye but no has taken some very good hits and survived

• Overall
• Quality
• Value

Customer Rated

Sep 20, 2012

4.5 for quality because of a over tightened screw on the back bumper.
I plan to use a 1600-2000kv motor so i get 25-30km/h of usable speed.
The gearbox is alloy and the pinion gear fits a 3.17mm shaft.
The stickers are packed flat not rolled up like with some other models.

• Overall
• Quality
• Value

Customer Rated

Aug 06, 2012

what a great buy and value for money this is a great rc to bash around the car park .the kart spins out a little easy but fixed with some wieghts in the rear and half at the front ,also i took off the rims and tyres from kart and fitted rims and foams from my 3racing f1-09 it is a straight bolt on the rear just change the screw to smalller one and the fronts are now bearing fit i just used a spacer behind split pin then used smaller screw again to hold wheel on this gave the kart really good grip and steering and is now running foams YEH!!!! hope it helps once again best bang for buck rc out there well made looks great and heaps of fun

• Overall
• Quality
• Value

Customer Rated

Jun 28, 2012

just recieve it today wow this thing is big nice quality and nice cart it came well packaged this car is not kit is rtr chassis i am waiting my esc,motor,and battary this cart is 1/4 scale is my first cart and i must say that for this price i am impressed by the size package and quality of matirials on cart but the best part is the back palte that the axle is attached its carbon fibre thats a big step forward for hobby king and turnigy i am in love with this cart and i am waiting for the other parts to make it raun also the tyres are very nice and sticky this cart is a must have rc car impressive cart impressive price impressive quality 5 STARS thank you hobby king-turnigy

• Overall
• Quality
• Value

Certified Buyer Rated

May 17, 2012

Fun and easy to drive. Good speed.