But construit pour les exigences élevées de couple de 1 / 8e buggies échelle et camions les Turnigy 1 / 8e moteurs Echelle 4 pôles brushless disposent refroidissement externe, un réparable peut concevoir et connecteurs de balles 4mm pré-soudées pour vous mettre sur la voie rapide.
Ce moteur est un match parfait pour le Turnigy 160A 1: 8ème échelle Sensorless ESC, consultez les articles connexes ci-dessous.
High Torque 4 Pole design.
ailettes de refroidissement externes pour une meilleure dissipation de la chaleur.
Pré-soudé 4mm connexion ESC conduit.
moteur réparable peut concevoir
RPM / v: 1900
Voltage: 3 ~ 5s Lipoly
Courant continu: 70A
Non Courant de charge: 3.0A
Dimension: 43 x 63.4mm
Longueur de l' arbre: 20mm
Diamètre de l' arbre: 5mm
Kv ( rpm / v)
Max Currents (A)
Longueur B ( mm ):
Longueur Can D ( mm )
Max Tension (V)
Arbre A ( mm ):
Unit Weight (g):
Diamètre C ( mm )
Longueur totale E ( mm )
Résistance ( mh ):
Smooth and strong in my RC8.2e.
Recommended!fast easy powerful very durable quietI run this motor in my hb ve8 with the hobbyking 1/8 120a esc, turnigy 4s 5000mah 20c lipo and this motor is a beast! Low operating temps, tons of torque, tire ballooning speed, awesome value, highly recommended!Ilove this motor, running it 4s in a converted ofna lx1 this thing has allot of kick. im probably running too low of gearing as it can almost pop a wheelie now. haven't hit the track yet but it seems promising, a bit stiff though when free spinning, but that is probably just the large magnet. runs cool and smooth in the car though. running with hk 120 amp escquesto motorello davvero di buone prestazioni ed leggero il giusto. Lo trovo prestante e molto sincero nella risposta e con totale assenza di coccing. L'unica cosa che non all'altezza sono le temperature che tendono a salire con troppa facilit. La prossima occasione prender quello con i sensori rosso, sempre da 1900KWh.... Intanto credo che, temperature a parte, sia un buon motore.Fahre den Motor in einem E-maxx mit 4s. Bester Motor bisher. Mit zustzlichen Lfter jederzeit ohne Temperaturprobleme.
Hobbyking danke fr diesen MotorInstalled motor in Losi 8ight 2.0 I have ran about 4 batt packs threw the motor. overall power is great. 15 pinion 46 spur. Motor dos get a little wormer than normal after about 8 minThis motor is sweet. Comparing it along with my castle 1406 5700kv motor, this feels far better. (Dare I say so). It's huge compared with the standard 540 10th scale motors. I only tested this motor on a 3cell lipo as I had put my beloved traxxas slash up for sale. Pairing the motor with a castle mamba max pro esc, it was brilliant. The torque even on 3s is brutal. Temperature stayed nice and low and my 3s had no problem getting the rpms churning out. I reccomend this motor as an ideal replacement for blown 1/8th motors and even as a great basher motor in 10th scale short course trucks includeing traxxas slash, hpi blitz. It's a tight squeeze in the slash, but once you've got it installed you're in for some seriously fun times. Well worth the price and it'll probably outlive alot of the muvh more exspensive motors. This motor is even cheaper than the traxxas titan 550 brushed motor. On thing to note, is you will need a pinion gear with a 5mm bore to fit the motor shaft and the motor connectors are 4mm. Apart from that this thing will really push your rc to the limit and possibly beyond what you thought was possible with your model.I use this motor for racing in a LRP S8 BXE buggy with 14/46 ratio. Very good performance, only 76 maxAmp with 4 cell LiPo and very good temperatures!
Looks good quality, time will tell the lifetime.Great motor. Got this in my hyper 7 conversion running on 4s with 21t pinion and 46t spur. Lots of power and was hitting 45-50mph on this setup. Would buy again if i had the choice. Would also reccomend to a friend. If I was pushed to mention a bad point it would be that at very low speed cogging is quite bad, but im sure it would be the same with most other motors