Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy 100 Degree Twist rotation n Tournez Retract pour 2.5M / 15kg Warbirds

Generating Links

Turnigy 100 Degree Twist rotation n Tournez Retract pour 2.5M / 15kg Warbirds

Prix:

Now save économisez 0,00 € 0,00 €

110,78 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9107000340-0
Livraison gratuite? Cliquez ici pour apprendre plus!

escamote Turnigy CNC sont fabriqués à partir de pièces en alliage métallique et des composants de haute qualité. Cette torsion rétractable superbe servoless et tourner principal jeu d'engrenages est un must pour votre échelle modèle warbird tels que le Hellcat, Corsair ou P-40 dans les 2.5m unités size.These sont fournis en tant que principal mécanisme de retrait fixé seulement, vous permettant de choisir exactement quelle jambe vitesse de style dont vous avez besoin. Conçu pour les jambes d'engrenage avec une taille de broche 8mm.

Spécifications:

Diamètre engrenage Leg arbre: Φ8mm
Vitesse: 6V: 6 secondes / 100 degrés, 7.4V: 5 secondes / 100 degrés
Couple: 6V: 16 kg-cm, 7.4V: 18 kg-cm
Amps: 6V: pas de chargement: 200mA avec chargement: 250mA
7.4V: pas de chargement: 220mA avec chargement: 280mA
Poids: 163g chaque
Taille de base: 86x28x35.5mm
Motif Bolt: 44x25mm

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Acesimmer | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 15, 2016

I just installed a set of these in my 78" scratch built A6 Intruder. From the outside the quality looks very good and seem very solid. However, after doing a few test cycles so that I could set the strut angle one gear just locked up half way with a stripped gear. Tried to get HK to replace under warranty and they sent me a cheap set which are not the same. So I had to open up and see what I could find wrong.

The quality of the case and internal metal parts are very good and strong. The screw drive gear box is very weak and not up to the rest of the product. If Turing would install a stronger gear box these retracts would sell like hot cakes. Unfortunately I have a contest in two weeks so could not send the damaged one back so I'm screwed for a replacement. 2 out of ten but with a stronger gear box would have been 9 out of ten.

Balsa Bits | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 21, 2015

not very good at all, if you tighten the bolt on the tall bracket the retracts bind, bad geometry design, the grub screw on the holding bracket was stripped and theres not enough material to tap it out, very weak, retracts seem ok but the twist and turn is very poor, was going to use them on my esm p40 but will stick with original air retracts, cannot recommend these at all. just like my ca 80 motor from hk, rubbish.

nihil | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 10, 2014

Usualy my orders take 3 month to be delivered but my retracts were delivered 112 h 20 min after my order click. THANKS DHL. - I live in Brasil.

nihil | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 10, 2014

I should not have rated it 5 crowns, but... CHECK BEFORE TESTING: They have 12 socket head bolts, two were tightened, 8 were loose and 4 I found inside the box. Dont through away the box before checking the bolts. THEY ARE NOT 100 DEGREE ROTATING, MINE ARE ONLY 94 ( NINETY FOUR DEGREE ONLY ). By fortune 94 in both retracts.

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!