New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy 10xC 10S 400W 10A Dual Balance canal Chargeur

Turnigy 10xC 10S 400W 10A Dual Balance canal Chargeur

Discontinued Product

Please continue searching for a similar product.
SKU:
9214000004
WANT FREE SHIPPING? Click here to find out more!

Le TOUT NOUVEAU Turnigy 10xC est conçu pour fournir une sortie de courant max 10A énorme et 400W de puissance (évalué @ entrée 30V DC lors de la charge d'une 10s batterie Lipoly) - tout en conservant une taille compacte, et disponible à un prix extrêmement compétitif. Vous serez mal à trouver une solution rapide plus-complète plus sûr, pour répondre à vos besoins de charge dans la classe de 400W. Soutenir manuels courants de charge jusqu'à 10A ou Charge AUTO taux (1.0C, 2.0C et 3.0C), le 10xC est capable de charger en toute sécurité un ou deux packs de batteries au lithium simultanément. Ajoutez à cela de nouvelles fonctionnalités telles que le support Multi-Chemistry (le 10xC peut charger Li-XX, A123 (LiFePO4), NiCd, NiMH et Pb types de batteries), la charge de l'automobile ou de décharge à des niveaux de stockage (Li-XX uniquement), 10 utilisateur presets Configurable, et vous commencez vraiment à avoir une idée de combien la valeur est emballé dans ce chargeur de haute qualité.

Caractéristiques:
Capable de jusqu'à 10A taux de charge et la puissance 400W totale de charge
canaux doubles de sortie permettent de charger deux batteries simultanément
1 ~ 10S Li-XX capacité de charge
support de batterie Multi-Chimie (Li-XX, LiFePo4, NiCd, NiMH et PB)
Plug and play Li-XX charge
10 préréglages configurables par l'utilisateur
conception de cas Compact

Précision de mesure:
Résolution en tension: 78uV (16 bits)
Tolérance de tension: +/- 6mV
Courant de charge: +/- 1%
Capacité ajouté à bloc: +/- 1%
Capacité de pourcentage ( "Fuel"): +/- 10% (avec table de carburant précise définie dans préréglé)

Spec.
Tension d'entrée: 10 ~ 32VDC
Puissance Circuit: Charge Max: 400W / décharge Max: 42W
Charge Gamme de courant: 0,1 ~ 10A
Décharge gamme actuelle: .1 ~ 5.0A
Cellules Ni-MH / NiCd: 1 ~ 28
Cellules Li-XX: 1 ~ 10
Dimensions: 174 x 93 x 43mm
Poids: 613G

Remarque:
Les conseils d'équilibrage sont vendus séparément. S'il vous plaît voir les produits connexes ci-dessous. Deux cartes d'interface pour votre marque de la batterie seront nécessaires pour 10s de recharge.

  • UGS 9214000004
  • Brand Turnigy
  • Capacité ( mAh ) -
  • Poids 879.0000
  • Longueur 250.00
  • Packaging Width 50.00
  • la taille 150.00
  • Turnigy 10s 600w Charger
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I am delighted with this charger. It takes a while to figure out how to make changes to the factory presets, but from then on it is great. I especially like knowing the cell internal resistances. You can easily spot what's causing packs to go bad. However, since I charge 5S-5000mah packs 90pcnt of the time, having to use the connection boards became a hassle. I cut off the lead from the JST-EH side of the board to the charger and made a long extension, using two 5S extensions and now I can reach my battery pack balance connectors easily. I wish that the charger was sold with the long extensions I made.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am delighted with this charger. It takes a while to figure out how to make changes to the factory presets, but from then on it is great. I especially like knowing the cell internal resistances. You can easily spot what's causing packs to go bad. However, since I charge 5S-5000mah packs 90pcnt of the time, having to use the connection boards became a hassle. I cut off the lead from the JST-EH side of the board to the charger and made a long extension, using two 5S extensions and now I can reach my battery pack balance connectors easily. I wish that the charger was sold with the long extensions I made.

Pretty nice small charger. Easy to use, however the number of presets is poor. It is not complete dual channel - I would like to say that sometime you can charge two battaries.
do not forget two bye TWO balancing boards

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pretty nice small charger. Easy to use, however the number of presets is poor. It is not complete dual channel - I would like to say that sometime you can charge two battaries.
do not forget two bye TWO balancing boards

Operation: After problems were resolved, it performed great, charging both turnigy 2S 5800mah nanotech in a very short time at 10A (input voltage at this time was 17.7v according to charger), after balance all sells @ 4.20v. I did a storage cycle after this and and it took rather long since it only discharges for starage at 1A! anyway, after storage cycle complete all sells were at 7.79v.

After charging: Power supply and charger slightly warmer then room temperature, they operate quietly with the fans only engaging every now and again. Batteries where cold to the touch. after both charge and storage (discharge) cycles.

Conclusion: Highly recommended. This is a great charger and I think it offers good value. Make sure you understand the manual (same as xellpro 10XP )before operation.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Operation: After problems were resolved, it performed great, charging both turnigy 2S 5800mah nanotech in a very short time at 10A (input voltage at this time was 17.7v according to charger), after balance all sells @ 4.20v. I did a storage cycle after this and and it took rather long since it only discharges for starage at 1A! anyway, after storage cycle complete all sells were at 7.79v.

After charging: Power supply and charger slightly warmer then room temperature, they operate quietly with the fans only engaging every now and again. Batteries where cold to the touch. after both charge and storage (discharge) cycles.

Conclusion: Highly recommended. This is a great charger and I think it offers good value. Make sure you understand the manual (same as xellpro 10XP )before operation.

Review repost (2 part).

Quality out the box: seems very good, nice screen and easy to read. Menu options easy to understand and navigate with a lot of nice features. There are rumors that this is a rebranded cellpro XP, i believe it, although detuned to only deliver 10A max, not 15A.

Paired with: Two jst-xh balance boards and a 540w 18v hobbyking Power supply. (NOTE: does not come with discharge leads).

Problems: Initially had a problem "Ch1 bad S. Count" when trying to charge 2x 2S turnigy nanotech batteries on eboth channels using preset 1 or 2. Turns out after some investigation and with help from HK support, the balance boards convert the jst-XH wiring to the default node automatically, so if you are trying to charge jst-xh plugs using the turnigy, you must NOT set your charger wiring node to XH- KEEP IT IN DEFAULT (even though the manual says jst-xh should use XH wiring node). Also check that all the balance plugs wires are in properly, I got a "Ch2 Bad S. count" due to one not being seated properly while trying to discharge.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Review repost (2 part).

Quality out the box: seems very good, nice screen and easy to read. Menu options easy to understand and navigate with a lot of nice features. There are rumors that this is a rebranded cellpro XP, i believe it, although detuned to only deliver 10A max, not 15A.

Paired with: Two jst-xh balance boards and a 540w 18v hobbyking Power supply. (NOTE: does not come with discharge leads).

Problems: Initially had a problem "Ch1 bad S. Count" when trying to charge 2x 2S turnigy nanotech batteries on eboth channels using preset 1 or 2. Turns out after some investigation and with help from HK support, the balance boards convert the jst-XH wiring to the default node automatically, so if you are trying to charge jst-xh plugs using the turnigy, you must NOT set your charger wiring node to XH- KEEP IT IN DEFAULT (even though the manual says jst-xh should use XH wiring node). Also check that all the balance plugs wires are in properly, I got a "Ch2 Bad S. count" due to one not being seated properly while trying to discharge.

Other stores will force you to ship the product back to China in full retail packaging every time!

Hobbyking's warranty service is professional, fair and fast.

Where has my review gone?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Other stores will force you to ship the product back to China in full retail packaging every time!

Hobbyking's warranty service is professional, fair and fast.

Where has my review gone?

Customer files
Turnigy 10XC Firmware Update Utility Download [14]
10XP User Guide Download [523]
Turnigy 10XC User Manual Download [313]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save