New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy 2200mAh 6S 30C Lipo Paquet

Turnigy 2200mAh 6S 30C Lipo Paquet

Discontinued Product

Please continue searching for a similar product.
Poids
429 g
SKU:
T2200.6S.30
WANT FREE SHIPPING? Click here to find out more!

batteries Turnigy sont connus dans le monde entier pour la performance, la fiabilité et le prix. Il n'y a pas de surprise pour nous que les emballages Turnigy LiPoly sont les go-pack pour ceux qui savent. batteries Turnigy offrent la capacité nominale totale à un prix tout le monde peut se permettre.

batteries Turnigy sont équipées de décharge lourds conduit à minimiser la résistance et de supporter des charges de courant élevées. Turnigy batteries résistent aux extrêmes punissant de vol acrobatique et véhicules RC. Chaque pack est équipé de connecteurs en plaqué or et JST-XH connecteurs d'équilibre de style. Toutes les batteries LiPoly paquets Turnigy sont assemblés en utilisant des cellules IR appariés.

Vous ne trouverez pas une meilleure affaire dans les batteries LiPoly partout!

Spec.
Capacité minimum: 2200mAh
Configuration: 6S1P / 22.2V / 6CELL
Décharge constante: 30C
Décharge Peak (10sec): 40C
Paquet Poids: 369g
Taille du paquet: 105 x 34 x 50mm
Charge prise: JST-XH
Bouchon de décharge: Bullet-connecteur 4mm

  • UGS T2200.6S.30
  • Brand -
  • Poids (g) 429.00
  • Longueur 120.00
  • Largeur 50.00
  • la taille 55.00
  • Capacité ( mAh ) 2200.00
  • Décharge ( c ) 30.00
  • Taux de charge Max (C ) 2.00
  • La longueur A (mm) 105.00
  • Hauteur B ( mm ) 34.00
  • Width-C(mm) 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a better size for the Trex500. It fits a lot better under slimmer canopies. The 3000mAH is a very tight fit. These came properly storage charged. Great batteries.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a better size for the Trex500. It fits a lot better under slimmer canopies. The 3000mAH is a very tight fit. These came properly storage charged. Great batteries.

Re my last comment where I said I use two in my TRex 500 I must qualify not at the same time but one after the other.
One thing that I do find annoying is all me connectors are the XT 60, now HK have change the connectors for no reason, which means I have to do some tricky soldering (live Battery) yes I know there are adaptors (more weight more resistance more complications)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Re my last comment where I said I use two in my TRex 500 I must qualify not at the same time but one after the other.
One thing that I do find annoying is all me connectors are the XT 60, now HK have change the connectors for no reason, which means I have to do some tricky soldering (live Battery) yes I know there are adaptors (more weight more resistance more complications)

I use two of these in my T Rex 500 and they work well, I'm not into serious 3D but have a lot of scale fun, I get 7.5 minutes flying before the cells reach 3.7 volts and not even warm, I have just ordered some more.
Prior to getting the 6S I used two 2.2 3S in series they were a little heavier and had to be charged independently (twice as long).
Some of my lesser batteries suffer from broken balance wires but the balance wires on the 6S seem to be better quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use two of these in my T Rex 500 and they work well, I'm not into serious 3D but have a lot of scale fun, I get 7.5 minutes flying before the cells reach 3.7 volts and not even warm, I have just ordered some more.
Prior to getting the 6S I used two 2.2 3S in series they were a little heavier and had to be charged independently (twice as long).
Some of my lesser batteries suffer from broken balance wires but the balance wires on the 6S seem to be better quality.

Good quality battery, and the parameters given on the website are correct, connector is xt60, not 4mm bullet

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality battery, and the parameters given on the website are correct, connector is xt60, not 4mm bullet

Uso queste lipo in una 1/8 pista co motore hobbywing e ESC da 150 A e si comportano molto bene. Ne voglio prendere altre Grande HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Uso queste lipo in una 1/8 pista co motore hobbywing e ESC da 150 A e si comportano molto bene. Ne voglio prendere altre Grande HK.

Excellent pack, it powers my Protos heli nicely!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent pack, it powers my Protos heli nicely!!

It sais it comes with a 4mm Bullet-connector but there is a XT60 on it. This means I need to do some modification (what you see ist NOT always what you get...)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It sais it comes with a 4mm Bullet-connector but there is a XT60 on it. This means I need to do some modification (what you see ist NOT always what you get...)

Using in my hk500gt . Great battery. Much lighter than the 3000 I have been using. Yet still balanced the heli .After around 8 min of light 3d the battery is still cool.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using in my hk500gt . Great battery. Much lighter than the 3000 I have been using. Yet still balanced the heli .After around 8 min of light 3d the battery is still cool.

Execelente bateria, super barata vamos ver se aguenta o tranco, ne, comprei uma pra testar. renato-jaragua-goias-brasil

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Execelente bateria, super barata vamos ver se aguenta o tranco, ne, comprei uma pra testar. renato-jaragua-goias-brasil

Works perfect on my Protos FBL. Timer is at 5min and I put back 1600mAh at the end. Power is far more than needed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works perfect on my Protos FBL. Timer is at 5min and I put back 1600mAh at the end. Power is far more than needed.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!