Turnigy 4000kv 2810 EDF Outrunner 55 / 64mmSpécifications:kV- 4000Dimensions: 46 x 28mmShaft: 2.3 / 3.0mmTension: 11.1VPoids: 59gCourant à vide: 2.0AAucune charge RPM: 44640Courant de charge: 22.6ACharger RPM: 35220Thrust: 550gTrou de montage Bolt Circle: 18mm
Mtg. Numéro du trou et Taille: 4 x M2.5Comprend 2 arbres, 2.3 et 3.0mm
Kv ( rpm / v)
Max Currents (A)
Longueur B ( mm ):
Longueur Can D ( mm )
Max Tension (V)
Arbre A ( mm ):
Unit Weight (g):
Diamètre C ( mm )
Longueur totale E ( mm )
Résistance ( mh ):
Ok did more testing on this motor and no powerfull enough for the 64mm EF2000 also no good for the 50mm 10 blade impeller EDF from rccastle, tried diferent C 3s lipos with same result no power until I try a 4s lipo and only then the miny F18 flew.
It may work better on a 4 or 5 blade 50mm EDF.
I got one if this motor for my EF200 64mm EDF and it barely could fly so i replaced it for a new unit from HK.
now i just put it on a 10 blades 50mm EDF of a mini F18 and i have the same problem, it pulls 200W on a 3S 2200mha 25C bat (just for testing) but it doesn't have the power to get the 300g plane flying. so i don't know whats wrong with it?
for it only 2 crowns on overall
could be a fluck but now I'm afraid to order another one.I confess that I did not believe in their strength, but is very strong and has great speed. The delivery was quick and product arrived without any damage.Awesome Motor for the money cant beat it highly recommend i use on my SwampDawg AirBoat and its way over powererd for it only running on 2s lipo n turnigy trackstar 18amp esc made Airboat Super Fast n Never Gets Hot i Flipped The boat UpsideDown n it even ran underwater and it still runs perfect today after the abuse still like the day i bought ITS A MUST BUY FOR SUREI really enjoyed this engine, has great speed and perfectly meets my needs, I have a lightweight model aircraft and would like to improve your performance was great and gave the bill perfectly. If you need speed and has a lightweight model, it is worth buying it. I recommend!Very good, this engine was exactly what I wanted. Congratulations to HobbyKing, delivery was quick and the product is excellent, thanks.Really liked this engine is small and is exactly what I needed.
I want to make a comment about the delivery, buy on other sites and time to receive the products is very long and tiring, a little while and found the HobbyKing want to congratulate this site and its employees, the delivery was very fast and the product of great quality.
I recommend this product and HobbyKing, very good!comes without the needed 2,5mm bolts
i use this motor in my 55mm GWS EDF,
my battery is a 3S 2100mah 35C
the static thrust i get is 550gram, without any use of thrust tube,
but i do need to get a bigger battery because i use 2 of these systems,ideal for flycat EDFVery nice, sturdy motor. Well machined. Using two of them in my EDF F22 Raptor with twin 64mm fans (6 blade). Produces about 450g of thrust with 25A of consumption each on a Zippy 3S Lipo and 40A TowerPro ESC. Gets not too hot. Changing the axle to 2.3mm was not easy, had to use a pipe and hammmer to gently hammer the old axle out and then the new one in. Worked though.