Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy 3000mAh 6S 35C Lipo Paquet

Generating Links

Turnigy 3000mAh 6S 35C Lipo Paquet

Prix:

Now save économisez 0,00 € 0,00 €

62,68 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
T3000.6S.35
Livraison gratuite? Cliquez ici pour apprendre plus!

batteries Turnigy sont connus dans le monde entier pour la performance, la fiabilité et le prix. Il n'y a pas de surprise pour nous que les emballages Turnigy LiPoly sont les go-pack pour ceux qui savent. batteries Turnigy offrent la capacité nominale totale à un prix tout le monde peut se permettre.

batteries Turnigy sont équipées de décharge lourds conduit à minimiser la résistance et de supporter des charges de courant élevées. Turnigy batteries résistent aux extrêmes punissant de vol acrobatique et véhicules RC. Chaque pack est équipé de connecteurs en plaqué or et JST-XH connecteurs d'équilibre de style. Toutes les batteries LiPoly paquets Turnigy sont assemblés en utilisant des cellules IR appariés.

Vous ne trouverez pas une meilleure affaire dans les batteries LiPoly partout!

Spec.
Capacité minimum: 3000mAh
Configuration: 6S1P / 22.2V / 6CELL
Décharge constante: 35C
Décharge Peak (10sec): 45C
Paquet Poids: 514g
Taille du paquet: 139 x 43 x 39mm
Charge prise: JST-XH
Bouchon de décharge: Bullet-connecteur 4mm

  • Capacité ( mAh ) 3000.00
  • Décharge ( c ) 35.00
  • Taux de charge Max (C ) 2.00
  • La longueur A (mm) 139.00
  • Hauteur B ( mm ) 43.00
  • Width-C(mm) 39.00
attributeset-12
Close

Dimension Diagram Guide

  • attributeset-12

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Abel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 14, 2014

Overall pretty happy with the batteries. Flies a Habu 2 with wemotec evo and het2w27. Seems to hold even cells for now. Time will tell. Had one show up with a defective cell. Hobbyking stepped up and replaced if for me with little effort from me. Thanks Hobbyking

David | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 13, 2013

Bought this pack from HK USA. One cell was defective, thus I am completely unable to use this battery pack. I hope HK customer service works as well as I have heard.

__Bob | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 02, 2012

Super power Batterien und ideal fr den 6HV Compass Heli & T-Rex 500. Absolut zu empfehlen fr den Preis!!

deanross | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 07, 2011

Awsome battery for the trex 500!! 7 min flight time on the 500 typhoon motor w/ a 12 tooth pinion ...flying tt

GregBelnap | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 31, 2011

Use two of these in series to power 13 pound Giles. Will fly 19 inch prop and provide plenty of power.

Von K | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 09, 2011

I use these lipo's in a t-rex 500ESP, and fit perfectly with the lowered frame & a fusuno ex canopy. Arrived perfectly balanced & still have plenty of power a number of cycles later. Will be buying more!!

trendab | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 12, 2011

Excellent battery for my Rex 500. Over 10min hovering time on a 14 tooth pinion with a CC Ice 75 in governer on 2300 headspeed. Bought a second one.

Client | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 22, 2011

One hint in between:
after the first charge, I have spent , that from 2 of 6 LiPo's one cell was a little bit out of sync with the other ones (~0.25V). On one Lipo the charger was interrupted with an error message: Here one cell was all time during balancing 0.2V under the other cells ( 4.2V) Suddenly the cell (4.0V) was jumping over the limit, so that the Charge cut the charge with an error message. Also the dicharge would not be start. I have start the discahrge for 15 min. without the balancer and connect the balancer after this time.

After discharge the LiPo's to 3.6V min. per cell, pls use the store Menu. In this case the LiPo will be only charged to 60. Here it's need a time to balance every cell. If this one is finish, continuous to charge the LiPo to 100 and all things are fine :)

k7 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 21, 2011

This battery fits perfectly in my Trex 500 esp. After 5 flights or so it really came alive. Providing 5 min of flight time,with Hyperion 1600kv motor and 13t pinion. Balances very well and a good strong battery.

DeWe | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 13, 2011

I have buy 6 of them for the T-Rex500. There is enough place for this LiPo (with the new LipoHolder in the ESP-Version.
Also it is better for the LiPo, if the "C" is bigger (e.g. 3300mAh 30C = const. Ampere 99A this one has 3000mAh but 35C = const 105A)
The power-balance is after the first charging, discharged to 3,6V per Cell and reload to Store-Voltage nice balance between each cell. I charge the LiPo with 0,75 C and discharge them with ~2,1A. It is interesting how much the total capacity is: the charger shows as 60 (Store-Voltage) a little bit over 2800mAh(!) which was filled in. The normal LiPo-Checker shows 70.
About this values ( 5mOhm and less in depend of LiPo) I believe, that after formating the LiPo (5 times charge and discharge) the LiPo will be make a long time a nice job. I'll report later, after ~20 cycle, how the LiPo will be.
One negative point is: the LiPo's are delivered as default with a HXT connection. In Europe each HXT connector, which you can buy, is a little bit to small from the chassis. The packet with the connector is now 3 weeks on the way from HK to Germany (normal post :( :( :( ) so I have disconnect all of them and soldering 4mm Goldie's to the LiPo. Unfortunately this LiPo-seize (also Flightmax ) has as default NOT a 4mm or 5,5mm Goldie's so like the T5000.6S.30. It will be much better.

  1. 1
  2. 2
  3. 3
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!