New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy 4208 620kv Brushless Multi-Rotor Moteur

Turnigy 4208 620kv Brushless Multi-Rotor Moteur

Shipped From:
  • USA
Discontinued Product

Please continue searching for a similar product.
SKU:
922000015
WANT FREE SHIPPING? Click here to find out more!

Si vous êtes sérieux au sujet de la performance de votre multi-rotor, ne cherchez pas plus loin que ce moteur mult-rotor Turnigy. Construit avec des aimants haut de gamme 45SH, un nombre de pôles élevé, support moteur sur mesure et des fils très longs, ce moteur est conçu exclusivement pour les applications multi-rotor.

Ce moteur comprend un style adaptateur prop virole pour une utilisation avec de nombreux accessoires de style différents mettant en vedette un arbre 5mm. Il comprend également un boulon sur croix de montage pour une installation rapide et facile sur votre cadre de quadcopter.

Ce n'est pas un outrunner avion modifié. Il a été conçu à partir du sol pour les applications multi-rotor.

Spécifications:
Kv: 620rpm / v
Can Taille: 45mm
Shaft: 3.17mm (comprend un adaptateur prop pour le montage de prop 5mm)
Support moteur Trous: 16mm / 19mm
ESC suggérée: 30A
Évalué Watts: 180W
Poids: 79g
Nombre de cellules: 3 ~ 4S Lipoly
Moteur Longueur de câble: 390mm

  • UGS 922000015
  • Brand Turnigy
  • Poids 144.0000
  • Longueur 110.00
  • Packaging Width 40.00
  • la taille 75.00
  • Kv ( rpm / v) 620.00
  • Max Current (A) 30.00
  • Résistance ( mh ) 129.00
  • Max Tension (V) 15.00
  • (W ) 180.00
  • Arbre A ( mm ) 3.18
  • Longueur B ( mm ) 21.00
  • Diamètre C ( mm ) 42.00
  • Longueur Can D ( mm ) 8.00
  • Longueur totale E ( mm ) 32.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought 5 of these for a big H-quad project. Paired them with hobbywing 40A ESC's(Its what I had lying around). I did not use the supplied prop holder. Replaced the with prop holders that screws onto the shaft with a clamp screw. I use 12x4.5SF props on 4S battery. I use an APM flight controller and get around 12 to 15minutes flight time. I like the motors. They seem well made and balanced. Good enough for my application. The supplied prop adaptors suck, but the motor runs great. Thanks guys, great value for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 5 of these for a big H-quad project. Paired them with hobbywing 40A ESC's(Its what I had lying around). I did not use the supplied prop holder. Replaced the with prop holders that screws onto the shaft with a clamp screw. I use 12x4.5SF props on 4S battery. I use an APM flight controller and get around 12 to 15minutes flight time. I like the motors. They seem well made and balanced. Good enough for my application. The supplied prop adaptors suck, but the motor runs great. Thanks guys, great value for the price.

Figured out the same issue as mentioned in the previous review. The prop holder is not very good designed. When testing the motor the prop went to the ceiling and broke.

Recommendation is to use loctite to glue the adapter to the shaft.

The price of the motor seems reasonable.

Also I figured out timing issues with the plush 30A controller using fast/medium/slow timing. In low speed the motor is stuttering in every timing mode of the controller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Figured out the same issue as mentioned in the previous review. The prop holder is not very good designed. When testing the motor the prop went to the ceiling and broke.

Recommendation is to use loctite to glue the adapter to the shaft.

The price of the motor seems reasonable.

Also I figured out timing issues with the plush 30A controller using fast/medium/slow timing. In low speed the motor is stuttering in every timing mode of the controller.

Bought 4 of these motors to build quad with AQ600 frame.
Runs ok but one thing I would like to comment is about the included prop holder.
The holder does not hold the prop tight enough so that the prop turn a little bit. Also I noticed that the holder is not centered to the shaft of the motor. I see some vibration due to un-centered prop holder.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 4 of these motors to build quad with AQ600 frame.
Runs ok but one thing I would like to comment is about the included prop holder.
The holder does not hold the prop tight enough so that the prop turn a little bit. Also I noticed that the holder is not centered to the shaft of the motor. I see some vibration due to un-centered prop holder.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!