S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

1300kv Turnigy 4240 moteur Brushless

1300kv Turnigy 4240 moteur Brushless

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
204 g
SKU:
T4240-1300
Description
du
Dimension: 39mm x 43mm, 59mm (avec arbre)
Poids: 134g (kv1300) (non compris les connecteurs)
Diamètre de l' arbre 5mm
Longueur de l' arbre avant: 19,3 mm
Epaisseur des lames: 2mm.
Type d' aimant: 45SH
performances Max
Tension: 3-4S
Courant max: 50 ~ 60A / 20S
Prop: 10x5
Poussée: 1860 ~ 2400g
Pour 1800-2400g avion modèle 3D.

Télécharger des fichiers de données:
TURNIGY DATA MOTOR

Product
Specifications

Informations supplémentaires

  • Référence:
    T4240-1300
  • Brand:
    Non
  • Poids (g)
    204.00
  • Longueur
    89.00
  • Largeur:
    46.00
  • Taille:
    50.00
  • Kv ( rpm / v)
    1300.00
  • Max Currents (A)
    60.00
  • (W ):
    0.00
  • Longueur B ( mm ):
    33.00
  • Longueur Can D ( mm )
    17.00
  • Max Tension (V)
    15.00
  • Arbre A ( mm ):
    5.00
  • Unit Weight (g):
    134
  • Diamètre C ( mm )
    42.00
  • Longueur totale E ( mm )
    58.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
i am using this motor with a 10 x 7 apc prop on 4s 8000mah bat.. i am producing about 60 amps flys my viper jet of 2800g for 40min.. did anyone else tried it on 4s..and what prop did you use for max trust
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Powerful,but lasted only two flights,until stator separated from its glueing and pulled back.Body is actually joined in the middle,and rear bearing moved with stator.
Was using only 40A from 3s battery so well within specs limits.
Wont recommend
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very powerfull elettric motor. Very good for 2-3kg airplane
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just had a few first flights with my brand new Phoenix Model Sonic 25 Low Wing, this motor installed with a 60A ESC (80A peak), 10x7 three blade propeller, and a 5000mAh 30C 3S battery.

Setup pulls 58A at full throttle with fully charged battery. The plane flies very nice, motor and ESC do not overheat.

See 'files' for a photo
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Turnigy 4240 Brushless Motor 1300kv
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice motor... I put it in my scrathbuilt plane (1250g) and with 4S and 10X5 prop, 60A Esc, the plane has no problem in climbing vertically till you can hardly see it...hovers at around 50-60pcnt throttle... very nice motor..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The best and most powerfull motor I can for 3s setup!
Using with 10x5 APC prop and around 45A with 3s 8000mah.
My 2.2m wingspan and 2.4kg FPV bird can cruise at 4-5A and can go up to 3.5km up in the sky.
So the best choice for those who are looking at 3-4s setup and enough power for 3kg plane.
Will buy more!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Muito bom este motor, uso no meu pastinha asa baixa 1.30 de envergadura e 2200g e sobe na vertical com helice APC 12.6 e bateria de 3S 5000. Recomendo a compra.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
L' ho acquistato per il mio FunCUB ma purtroppo un po' troppo grande e ho dovuto ingrandire il buco
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I realy like this motor i'm using it in a supersportster .40 arf just right for the plane with a 11x6 prop and a 5000 ma. battery . It took 1st place at our 1st club event i use a red brick 40 speed control also great. And I abuse them! youtube (lhro )view from this plane of our beautiful beach with the camera purchased at hobby king thanks for the good times.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.