Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

TURNIGY 5-7.5A (8 ~ 42v) HV UBEC pour Lipoly

Generating Links

TURNIGY 5-7.5A (8 ~ 42v) HV UBEC pour Lipoly

Prix:

Now save économisez 0,00 € 0,00 €

18,62 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
TR-UBEC7.5
Livraison gratuite? Cliquez ici pour apprendre plus!

Alimentez votre récepteur et servomoteurs avec le baddest de solutions d'alimentation UBEC.
Le tout nouveau Turnigy 7.5A UBEC est un régulateur de commutation CC-CC avancé qui fournira un 5A constant ou plus avec de courtes rafales de jusqu'à 7,5 Ampères. Le Turnigy UBEC se branche sur un 3 - Pack Lipoly 10 cellulaire et fournit une constante 5 ou 6v à votre récepteur.
Le système comprend un anti-court-circuit et la fonction de surchauffe avec un couvercle de protection métallique mince, réduisant le bruit
Également inclus est un filtre de sortie pour réduire le bruit, un interrupteur marche / arrêt et une étape vers le bas de l'adaptateur de régulateur.
l'efficacité de la puce est de 92%.

Si vous avez un avion de taille moyenne, avec des servos standard et voulez un UBEC solide qui wont quitter. Ceci est une excellente option.


Spec.
Sortie (Constant): 5V / 5A ou 6v / 5A
Entrée: 8v-42v (3-10cell lipo) High Voltage
Taille: 48x27x9mm
Poids: 37g
Courant de repos: 20mA
Type: Commutation, cependant, en raison de la réduction du bruit (cas et filtre métallique mince) cette unité donne le même bruit comme un BEC linéaire.


L'unité vient avec des instructions complètes.

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

CENDRO | Acheteur vérifié

  • Overall
  • Quality
  • Value

very very good

Apr 18, 2018

i have 2 of them in boat.

Whiterabbit62 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 22, 2016

This UBEC is excellent for ground operations.. Low noise at 3 - 4 amps. The more amps you draw the more noisier it gets.
If you wanna use it on a multicoper dont buy this , Search Matek or diatone, they are better.

Matthew | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 28, 2016

Worked great on the bench driving servos and RX off a 3S pack, but as soon as I plugged it in to a 6S it gave no output and just heated up. I have had good look with the lower rated Turnigy UBECs in the past, but this one seems to have some issues - will try and get a refund on it.

rhoan | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 03, 2016

I have used this UBEC on my HK 600GT with Align FBL head, 3GX 6S setup since 2013.
I has worked great for me and has never failed. In 9/6/13 comments I had blame the UBEC for one failure with it but later determined that the crash was cause by a loose battery solder joint which I did poorly. Yesterday I tried this BEC on my Assault 700 with 12S (50v) setup and it worked perfectly without any overheating ( metal case ). I will keep using and monitoring it since the specs say 42 volts max. This UBEC is a winner in my book

bzfrank | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 11, 2015

Solid ESC if you do not need more than 5A. I use it quite often in small planes and helicopters.

Note that for high peak currents (>5A) output voltage drops significantly, adding a large capacitor to the output helps.

hermans.dom | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 21, 2015

Good quality. On/off switch is handy. Very good.

Remigiusz | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 28, 2015

Very good quality , solid construction . Included is a switch. Easily copes with 8 servos.Currently there are 2 gimbal servos TALON XUAV

smithd@ecu.edu | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 30, 2014

I use it with the Trackstar 200amp 1/5th ESC. If you didn't know the ESC didn't have BEC circuitry, you sure wouldn't be able to tell looking at the truck. Runs 2 high performance servos smoothly. Highly recommend it.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 27, 2014

I use it in F5B, with 6 servos. I've just cut the switch.

valbg | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 25, 2014

I have not had problems. I have not refused at work. Power quality of the receiver and servo larger models.

Fichiers clients
TURNIGY 5-7.5A (8~42v) HV UBEC.jpg Download [1623]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!