Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy 540L V-Spec Inrunner w / Impeller 810kv

Generating Links

Turnigy 540L V-Spec Inrunner w / Impeller 810kv

Prix:

Now save économisez 0,00 € 0,00 €

38,05 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
D540L-810
Livraison gratuite? Cliquez ici pour apprendre plus!
Inrunner de couple élevé, excellente pour la course hélices sans avoir besoin d'une boîte de vitesses.
La conception de stator unique crée un bas moteur à couple élevé actuel et grand pour les remplacements de outrunner et beaucoup plus efficace que inrunners de la même taille.
Dimension: 36mm x 58mm, 70mm (avec arbre)
Poids: 108g (kv810) (non compris les connecteurs)
Diamètre de l' arbre: 5mm
Longueur de l' arbre avant: 13mm
Epaisseur des lames: 2mm.

Spec.
Batterie: 3-4 cellulaire 4S / 14.8V 18
RPM: 810kv
Courant max: 50A
Aucun courant de charge: 2.1A
Résistance interne: 78.0ohm
Données;
3S 11.1V
Prop: 13x4, 12x6
Max actuel: 23A, 21.5A
Pull: 1350g, 1250g
4S 14.8
Prop: 12x8, 13x6.8
Max actuel: 27.2A, 39A
Pull: 1700g, 2000g
ESC: 60A
Type de batterie: 3-4S Seulement
  • Kv ( rpm / v) 810.00
  • Max Current (A) 55.00
  • Résistance ( mh ) 0.32
  • Max Tension (V) 15.00
  • (W ) 800.00
  • Arbre A ( mm ) 5.00
  • Longueur B ( mm ) 57.00
  • Can Diamètre C ( mm ) 36.00
  • Longueur Can D ( mm ) 54.00
  • Longueur totale E ( mm ) 70.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 11, 2012

The best inrunner motor for now.

chareyre | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 07, 2012

Bon moteur puissant ,mais demande un bon rglage du timing sur l'esc.
A recommander pour moto-planeur de plus de 2 mtres d'envergure.Avec 12x6 propeller, les montes sont fantastiques.

Gun man | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 07, 2012

Nice built and very powerful motor ! I will use it in a boat on 5 cell battery lipo! Very silence motor BUT No 36 mm cooling jacket will fit ! i most build one custom for him! The one i got from HK is to long and 2mm to tight!

Sean | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 01, 2012

I put 2 of these motors in a custom built scale model boat driving two 2in 3 blade propellers (directly connected). Did a test run and so far am impressed with the power these motors can deliver. they did get fairly warm, but had no problems driving boat propellers. They seem to be a good alternative to gearing down a faster motor.

sorenlaf | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 12, 2011

Worked great in my Siren for about 10 flights.

When I moved the motor, esc, and prop to another glider (2.5 meter full house), one with less airflow to the motor, it burned out on the first flight. BTW, while there is less inlet air on the 2.5m ship, there is a lot more room in the motor bay, so I expected sufficient circulation with the impeller.

Maximum current was about 35 amps (14x8 folder with a 3cell 20c 2200mah).

Yes, I probably should have improved the airflow, but it was well below rated current of 50 amps, and with the impeller (one of the main reasons I bought it as the airflow in a Siren is not so great, and a 36mm inrunner barely fits), I expected it to be somewhat more resistant to heat.

Bottom line is it's a nice motor, but don't rely on the impeller as a substitute for good airflow to cool it.

It was about $10 cheaper when I bought it, or I'd give it a higher rating for value - which is based on the current price.


airsnooze | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 30, 2011

Very strong motor... hard to start ..but run very weel

Denis | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 19, 2011

"Weight: 108g" - this is a lie

Real weight is 162g.

"Your review was too short." - I have nothing more to say

siouxpony | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 10, 2011

sieht nett aus dieser motor. bei mir ist er schon defekt angekommen.
er luft nicht an, zuckelt nur hin und her. eine wiklung ist defekt.

paulgb73 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 26, 2011

Great motor I have tested it on a 2200mAh 4s pack on a 70A esc with various Aeronaut folding props:
7x6 15.2V 15.3A 12,500rpm 230W 71mph 550g 1.21lb
9x7 14.8V 26.5A 10,950rpm 392W 72mph 1030g 2.27lb
10x7 14.4V 31A 10,200rpm 446W 67mph 1340g 2.95lb
11x6 14.4V 35A 9,600rpm 504W 54mph 1550g 3.42lb
12x6.5 14.2V 40A 9,000rpm 568W 55mph 2250g 4.96lb

Strukov_a | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 25, 2011

The motor was tested with some props
V A W Rpm Pull, gr Prop
13.49 27.4 370 8145 1980 13X4
13.66 28.6 390 8310 1990 13X4
13.58 28.6 388 8250 2000 13X4
13.14 33.7 443 14430 1540 12X8
12.69 36.3 461 6435 2200 14 X7
13.55 40.6 551 6750 2300 14 X7

Battery Type: 4S Li-Po. ESC: 50A - Hiperion
May be these data will be useful for somebody.
Fine motor

  1. 1
  2. 2
  3. 3
Fichiers clients
Boat Installation Download [18]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!