S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Turnigy 6000mAh 2S2P 7.4v 25C Hardcase Paquet

Turnigy 6000mAh 2S2P 7.4v 25C Hardcase Paquet

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
407 g
SKU:
T6000.2S.25HC
Description
du

Turnigy batteries sont connus dans le monde entier pour la performance et le prix, il est donc pas une surprise pour nous qu'ils sont le feu à emballer pour ceux qui savent.

batteries Turnigy Hardcase résistent au stress et aux chocs associés aux extrêmes de réprimer ou de désactiver la course sur route. Peu importe le type de conduite que vous préférez, les packs de Turnigy Hardcase sont un choix idéal.

paquets Turnigy Hardcase LiPoly utilisent des cellules appariées IR, fournissent la capacité nominale et effectuer lorsque vous frappez la manette des gaz. Vous ne trouverez pas un meilleur pack hardcase de rapport qualité-prix!

Spec.
Capacité minimum: 6000mAh
Configuration: 2S2P / 7.4v / 2Cell
Décharge constante: 25C
Décharge Peak (10sec): 35C
Paquet Poids: 366g
Taille du paquet: 138 x 46 x 29mm
Charge prise: JST-XH
Bouchon de décharge: Bullet-connecteur 4mm

Product
Specifications

Informations supplémentaires

  • Référence:
    T6000.2S.25HC
  • Brand:
    Non
  • Poids (g)
    407.00
  • Longueur
    138.00
  • Largeur:
    29.00
  • Taille:
    46.00
  • Capacité ( mAh )
    6000.00
  • Décharge ( c )
    25.00
  • La longueur A (mm):
    138.00
  • Hauteur B ( mm ):
    46.00
  • Width-C(mm)
    29.00
  • Unit Weight (g)
    366
  • Taux de charge Max (C ):
    2.00
  • Discharge Plug:
    Non
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
gran duracion y buena calidad
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The pack is every bit of awesome. Great runtime and power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfect for 1/10 cars or any situation where you need a shock resistant powerfull lipo. Fits perfectly in a Turnigy Trooper or a Basher Nitro Circus 1/10.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought a pair of these to run in my Erevo and other models. It's a really tight fit in the erevo/summit battery compartments, but they do fit. My only issue is that the hardcase has notches on the end and the top for the main wires, to fit in the revo you need to fold the wires down and this is where I ran into a small problem... On one of the packs, solder had wicked up the wire a little too far when they assembled it at the factory which wont allow the wire to go out the end without kind of kinking it and I'm sure eventually it will wear through the insulation and require me to disassemble and repair it.. Still a good value for a hardcase pack of this mAH rating!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I own 3 of these. All are still currently working after a decent amount of usage over 2 years. I've ran two packs a good 70 full charges, the other one around 30-40 full charges. The balance plugs are still in great condition on all of them. The hardcase on one of them started to fall off after it went through a couple of really bad thrashes falling out of the R/C car, but a little tire glue has been holding it strong for quite a while and now it's being used in a Traxxas Summit, that has a much better battery bay than my old buggy. These have exceeded my expectations for the price. I will probably be buying a few more of these pretty soon just for extras.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought 2 of these for my Stampede 4x4 which should also fit the Slash 4x4. They fit the battery tray well with the extended battery kit. Provide plenty of power and great run times. Hard cases mean you don't need to worry about knocking them around while bashing them.

Would buy again no problem.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought four of these to use in my short course trucks. They are way better than high dollar brands I have used in the past. The lower C rating and heavier battery actually made my mod two wheel drive easier to drive (with faster lap times). This can equate to better performance for bashing as well since you spin the wheels less which wastes battery power.

All my batteries came at the perfect storage voltage and were matched. They have used now at least 10 times each and are still perfectly balanced.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These battery packs are great! Huge amount of power and very long run time. So cheap too and the hard case is ingenious. Highly recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Use these in 1/8 Trailblazer for awesome runtime. Arrived within 2 days and both lipos had good storage voltage.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good pack, long run time

runs for at least 30min with my brushless setup
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.