Afficher : TOUTES CATÉGORIES 0 Radio / Servos 633 Radios 255 Radios 82

Turnigy 9X émetteur 9Ch sans module (Mode 2) (v2 Firmware)

Turnigy 9X émetteur 9Ch sans module (Mode 2) (v2 Firmware)

70 La Revue

Prix:

Now save économisez 0,00 € 0,00 €

48,13 €

Déjà acheté Discontinued Product

Please continue searching for a similar product.

SKU:

9114000004

Livraison gratuite? Cliquez ici pour apprendre plus!

Partagez ce produit et gagner 300 points (2,41 €) [ ? ]

Description du produit

En raison de la demande populaire, le Turnigy 9X est maintenant disponible sans un module, capable d'accepter tout module compatible JR, vous pouvez maintenant choisir votre propre système de radio 2.4ghz.

Avec la mise à jour du firmware v2, corriger de nombreux défauts de la précédente 9X, ceci est, un système de 2.4Ghz fiable de qualité adapté pour les débutants et pro pilotes semblables.

Obtenir que immobilisé dans le sentiment que la technologie seule 2.4Ghz glitch libre peut fournir.
Ultra temps de réaction rapide et sans interférence contrôle de votre modèle est seulement réalisable avec cette technologie 2.4Ghz.

Sans aucun doute, le meilleur système de 9Ch de valeur disponible!

Nombre de Channnel: 8ch ppm / 9ch pcm
Affichage: 128 * 64LCD
Type de support: Heli / Acro / Glid
Support utilisateur: 8
Modèle de bâton: 4
Type de codeur: ppm / pcm
Subtrim: Oui
Interface Simulator: Oui
Buzzer: Oui
Low Voltage Show: Oui
Requis: batterie, module, RX

Compris:
Turnigy 9x 9Ch émetteur seulement

Important.
Le TURNIGY 9X a été reflashed avec le nouveau firmware v2, fixant menu précédent et mélanger les problèmes. Ce firmware flash est disponible uniquement à partir de notre système TURNIGY 9X comme nous flashons chaque unité dans notre bureau avant qu'elle soit expédiée.
Les achats de toute autre version rebaptisée du TURNIGY 9X auront pas le dernier firmware et des correctifs (même l'usine OEM n'a pas ces mises à jour).

Remarque: Le prix de détail de cette radio est proche de la 9X originale avec module et le récepteur en raison de l' offre et de la demande. Comme cette version est fabriqué en quantités beaucoup plus faibles des prix de revient augmente. Cette version de 9x est proposée par la demande des clients qui souhaitent utiliser leur propre choix du module et le récepteur sans les tracas de retirer le module et le fil de la 9X originale.

Spécifications du produit

Vidéos

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Discuter 0

Sujets

Trier par

Sujets les plus récents

Publier un nouveau sujet

La Revue

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

SpitfireQuebec | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Mar 16, 2014

I bought this radio last summer and I was never able to used. It stops display for no reason and after I verified with other owners it seems that many have the same problem. I heard many comments about that but no one that would solve that problem. And forgot about returning it as you will be stuck for paying transport. Very disapointed.

| Acheteur vérifié

Overall
Quality
Value

Certified Buyer Rated

Feb 09, 2014

Internally soldered FrSky DHT into transmitter. Did some minor, but delicate, additional soldering of jumper cables between FrSky unit and 9x micro processor to provide telemetry on 9x screen. Also required soldered in USBasp connector adaptor onto 9x board to flash the transmitter with OpenTX firmware. Now I have receiver and motor battery voltage, altitude and radio signal strength data on my 9x screen during flight. OpenTX firmware also offers many other advantages of stock firmware - more model memories, improved mixing and programming etc.

barneys | Acheteur vérifié

Overall
Quality
Value

Certified Buyer Rated

Dec 31, 2013

looks good but i would prefer the 9xr

Michael | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Dec 25, 2013

Hello all,
I recently purchased this, and Ive found it to be pretty good. However, there is some quality check problems i found, as the common issue with bad potentiometers was present in mine. i was able to dissassemble the radio, remove the POTS safely, and one of them had a short on it, luckily i was able to cut it myself with a precision knife. the other bad POT only needed a cleaning, then it was like new. I recommend cleaning and lubricating the ON/OFF switch as well, and cleaning the POTS on the gimballs as well, just as precautionary maintenance. Other than that, it feels top notch in the hands, the gimballs are VERY smooth, and feel great. highly reccommend. A good buy, but it just needs a bit of touch ups on internals. overall, good product, and worth the extra bit of hassle to repair it. Thanks turnigy!

Jeremy | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Dec 08, 2013

For the price this is a fantastic transmitter and a great platform for modification. Looks great in black and in my opinion this is a better looking and feeling radio than the 9XR.

The big drawback is the stock firmware - it's simply awful. After battling with it for a few days I flashed it with er9x and have never looked back.

Verdict: If you like to mod your toys then buy this. If you don't like the idea of messing about inside then buy the 9XR instead - it already runs proper firmware and includes an LCD backlight so all the hard work is done for you.

alibaba_1780 | Acheteur vérifié

Overall
Quality
Value

Certified Buyer Rated

Nov 08, 2013

Transmitter is perfect for my income, which is complete with its transmitter expensive as others, I am very satisfied to use this transmitter and I have 3 pieces ..

| Acheteur vérifié

Overall
Quality
Value

Certified Buyer Rated

Oct 26, 2013

I am very satisfied,satisfactory quality,very nice, you need to try it, the material is very nice, it works really well, very nice,.......

Nate892 | Acheteur vérifié

Overall
Quality
Value

Certified Buyer Rated

Oct 06, 2013

bought this as a replacement since my 9x with stock module died, plan to reuse the module and antenna from my dead 9x to use in this, saved a few bucks instead of buying a completely new one

Michael | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Oct 02, 2013

Great price.I an using this with Dragonlink and it works great.All switches must be in back position or you will get a switch error.In the case that all switches are back and you still get a switch error,which happened to me,then you most likely have a bad switch.Easy to test,find and replace.Works very well with Naza by using helicopter mode.Use PRODUCT ID: 9210000036 as your transmitter battery and you will be surprised by the run times even with a Dragonlink.Main thing I do not like about this radio is that it has only one three position switch.

kc135boomer | Acheteur vérifié

Overall
Quality
Value

Customer Rated

Jul 22, 2013

I ordered it Mode 2 and it showed up Mode 1 (even says Mode 1 on the screen). What ever happened to QC? I hope HK makes good on the exchange with out to much standard "its my fault" red tape. Time will tell...