Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Aerodrive SK3 - 2118-3100kv Brushless Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 2118-3100kv Brushless Outrunner Motor

Prix:

Now save économisez 0,00 € 0,00 €

14,89 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
SK3-2118-3100
Livraison gratuite? Cliquez ici pour apprendre plus!

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 8T
Tension: 2S Lipoly
RPM / V: 3100 kv
Résistance interne: 0,18 Ohm
Max Chargement: 5A
Puissance: 42W
Shaft Dia: 2.0mm
Poids: 17g
Branchez Moteur: 2mm Bullet Connector

  • Kv ( rpm / v) 3100.00
  • Max Current (A) 5.00
  • Résistance ( mh ) 180.00
  • Max Tension (V) 7.00
  • (W ) 42.00
  • Arbre A ( mm ) 2.00
  • Longueur B ( mm ) 21.00
  • Can Diamètre C ( mm ) 21.00
  • Longueur Can D ( mm ) 18.00
  • Longueur totale E ( mm ) 25.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Kieran Marnane | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 19, 2016

Great motor if you want to turn the bonsai wing into a rocket, 2s lipo and this thing screams, unlimited vertical, i like it!

Halin | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 26, 2016

Mounted it my Bonsai, proceeded to try to stretch the o-ring on (the screws have no clearance), gave up and tried to loosen the screw on the prop saver and it just snapped off leaving half of it unmoved and flush to the motor bell. I'm now 15$ poorer and no closer to getting in the air. Dont buy this crap.

Gianluca | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 18, 2015

A bit heavy , but really sturdy ( a plus for me )
runnin on 2S with a t.gy plush 6 amp ESC
tested props
4040
4045
4141
on a 133 gram depron model (Kawasaki KI-61 reproduction 560mm wingspan)
the 4.1X4.1 prop is the best , with a 25 C 500 ma zippy 2S I fly for about 7 minutes , and I like speed :-) .
The 4045 is a bit faster , but requires fast hand launch : my small plane runs up to 80 km/h .
If you plan to use this motor , build everything strong - it flies fast !

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 28, 2014

Motor macht einen guten Eindruck, luft sauber und rund.

insaneRC | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 30, 2014

I had this motor on a small plane I built for racing, and I have gone into the ground at 60-70mph the motor going in 5cm several times and it still works like the day I bought it. I will be buying more.

Henning | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 24, 2014

They are well built on the outside, but has timing/quality issues. Ordered 8 of these for use with Afro 12A and other SimonK ESC's. The motor lost power momentarily, sometimes causing a crash. After error-searching my tricopter for a whole weekend, trying different SimonK versions, reverse version etc (18.6.2014), even trying to add capacitor, I still got hiccups. Replacing the motor did the trick.

Daniel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 23, 2013

This is a fantastic little motor for the Bonsai.
Great performance , small , light , built in prop saver ...great product.

fantomphish | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 25, 2013

great little motor, had it mounted in a little wing and it went off the hook, smaller than I thought but purrs like a kitten, totally recommend this

Blackjackr | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 28, 2012

Decent tiny little motor, pulling about 6.8A with a 5.3 prop on a 2s nano-tech. Wish the prob saver was a tiny bit longer just to hold on a bit more but works well enuff.

anguyen | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 25, 2012

I have bought 4 of them. 1 has loose copper wire inside the bell and stuck between the bell and stator.

  1. 1
  2. 2
Fichiers clients
Drawing Download [87]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!