Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Aerodrive SK3 - 2122-1800kv Brushless Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 2122-1800kv Brushless Outrunner Motor

Prix:

Now save économisez 0,00 € 0,00 €

15,91 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
SK3-2122-1800
Livraison gratuite? Cliquez ici pour apprendre plus!

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 7T
Tension: 2 ~ 3S Lipoly
RPM / V: 1800kv
Résistance interne: 0,16 Ohm
Max Chargement: 7A
Puissance: 55W
Shaft Dia: 2.0mm
Poids: 23g
Branchez Moteur: 2mm Bullet Connector



  • Kv ( rpm / v) 1800.00
  • Max Current (A) 7.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 11.00
  • (W ) 55.00
  • Arbre A ( mm ) 2.00
  • Longueur B ( mm ) 24.00
  • Can Diamètre C ( mm ) 21.00
  • Longueur Can D ( mm ) 22.00
  • Longueur totale E ( mm ) 28.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

MilanPastor | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 26, 2012

Dvouplopnk z EPP rozpt 500mm, vha 195g uveze pohodln s 2S LiPo a vrtul 8x4E.

steverb | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 20, 2012

Very small in size, includes 3 motor mounts & pre-soldered connectors .
Prop has to be connected with included prop saver. There is no other way to mount props as shafts do not extend past motor, so keep that in mind.

Jason | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 31, 2012

I just finished a rough static test on my bench here of my friend's SK3-2122-1800kv.

Overall, the motor is small, but packs a pretty big punch. Good solid feeling magnets. The only odd thing is the back of the motor has a screw and self-locking nut (the kind with nylon built into them to keep it from coming off). I'm not sure what that's all about, but the built in prop saver works fine. I didn't have to unscrew the set screws to get the o-ring on, but did have to stretch the o-ring to slip it under the screws. No biggie there.

As noted in the Discussion section, the best prop for 2S operation does appear to be an 8x4 which in my tests gave 230 grams of thrust @ 6.7 V, approx. 46 Watts input power, and approx. 7A input current.

I also tested using a 3S setup and for thrust, the best (of the props I had) was a 5.7x3 which yielded 157 g of thrust @ 4A, 50W, 12.3V.

Here's my numbers:
V : prop : Watts : Amps : Thrust
6.7 : 8x4 : 46 : 7 : 230 g
6.x : 7x6 : 54 : 7 : 215 g
6.0 : 6x5 : 41 : 6 : 153 g
12.25 : 5x5 : 70 : 5.6 : 75 g
12.3 : 5.7x3 : 50 : 4 : 157 g

**NOTE** the above numbers are _rough_ and not meant to be scientifically accurate! They are static and eyballed. Just to give you an idea of what one hobbiest has seen with this motor.

I hope someone finds these number useful. I like the motor. Would be good on a 100 - 150g plane I'd say... doing 3D. Or for sport

ahmad | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 08, 2011

this motor has extreme vertical climb power !!!!! i run on it 2s 20c 610mah rhino pack and it give me around 9 minutes of hard 3 d flying and i use 8x4 gws prop it has more power then original hacker but it drain the battery more then hacker motor but power is awsome!!!!!!! recommendo

Fichiers clients
Prop mount done with 3D printer Download [24]
Drawing letter format 1:1 Download [24]
Drawing Download [58]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!