Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Aerodrive SK3 2822 à 1275 Brushless Outrunner avec arbre court

Generating Links

Turnigy Aerodrive SK3 2822 à 1275 Brushless Outrunner avec arbre court

Prix:

Now save économisez 0,00 € 0,00 €

13,48 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9192000076
Livraison gratuite? Cliquez ici pour apprendre plus!

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Note: Cette version dispose d' un arbre de longueur flush - idéal pour les petits projets de Quadracopter! Facile à monter dans des cadres Quad. S'il vous plaît se référer aux images.

Specs.
Active: 40T
Tension: 2 ~ 3S Lipoly
RPM / V: 1275 kv
Résistance interne: 0,185 Ohm
Max Chargement: 8A
Puissance: 95W
Shaft Dia: 3.0mm
Poids: 31g
Branchez Moteur: 3.5mm Bullet Connector

Comprend: adaptateur Prop

  • Kv ( rpm / v) 1275.00
  • Max Current (A) 8.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 13.00
  • (W ) 95.00
  • Arbre A ( mm ) 3.00
  • Longueur B ( mm ) 23.00
  • Can Diamètre C ( mm ) 28.00
  • Longueur Can D ( mm ) 22.00
  • Longueur totale E ( mm ) 25.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Jean-Claude | Acheteur vérifié

  • Overall
  • Quality
  • Value

Bien !

Jan 30, 2020

Good power for this cheap and light motor : I love it !

Taildragger45 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Very good value item.

Apr 29, 2019

Fast delivery, item as described. All round good value.

Paratwa | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 21, 2016

Nice engine, my standard engine for light twin ESA/EPA planes. I use two one with a 7x5APC and a 3S 2200mAh Zippy compact for 7 minutes at full throttle

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 17, 2016

i use it with 8045 props and works very well, quite and powerfull

MrMous | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 26, 2014

super powerful on the scorpion Y6 frame, even using the flimsy glow in the dark props

RC2211 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 07, 2014

These are very good motors. They run smooth and efficient with 8045 SF props on my SK450 quadcopter. I like how 3mm bullet plugs come pre-soldered! The best thing about these motors is that they only draw a max of 8 Amps! You only need 10A ESCs, but I use 15A multistar ESCs for extra safety (and they come with 3mm bullets). All in all a very good motor!

Pushworth | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 09, 2013

Beginners mistake. Ran these with a 30A turnigy plush speed controller, so they got mighty hot. Will order some 10A which look more suitable according to pls comments. Using a kk2.0 board, which needed firmware upgrade before the motors ran in all at once. Smooth motor. Good power on my dead cat - although not sure how it will run with 10A speed controllers. One downside, the 3 small screws (M1.5 hex)!for the prop mount are weak. Snapped some from over tightening, then I learnt my lesson, but the some snapped after one crash, and another whilst in flight. Recommend you replace these with strong bolts. Bullet connectors are 3.5mm, but I had to first give them a squeeze with needle tip pliers to get them to fit the gold connectors I purchased.

__HaKK | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 10, 2013

My favourite motors for F330 frames. Real smooth and with 3S 25Cplus LiPOs they have nice punch with 8045 props.

Rafael266 (YT) | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 05, 2013

Good motor. I bough 5 for a quad, one is kind stuck, so I left it for a later replace if needed. It has good performance with 8x4.5 and I got over 12 mins flight with a 800g quad (33cm frame). Although all the motors seems slightly 'lose' on the bearings since I can move it side ways.

bimdas | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 23, 2013

Using these with the hobbyking blue 12a esc, f330 frame and kk2 with a 3s lipo. Nothing to complain about. Bought 5, one as a spare, had a few good crashes and these are still going like new. Only negative is these should come with lock nuts as I had a prop fly off, lucky it hadn't lifted of the ground yet.

  1. 1
  2. 2
Fichiers clients
Prop Mounted Download [781]
Prop Adapter Download [3110]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!