Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Aerodrive SK3 - 2826-1130kv Brushless Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 2826-1130kv Brushless Outrunner Motor

Prix:

Now save économisez 0,00 € 0,00 €

22,64 €
Quantité:
Expédié de:
  • USA
  • Global
  • EU
Déjà acheté
Heure d'arrivée estimée: Aucune Heure D'arrivée Estimée [ ? ]
Statut:
Commande différée
SKU:
SK3-2826-1130
Livraison gratuite? Cliquez ici pour apprendre plus!

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 26T
Tension: 2 ~ 3S Lipoly
RPM / V: 1130 kv
Résistance interne: 0,120 Ohm
Max Chargement: 13A
Puissance: 125W
Shaft Dia: 3.0mm
Trous de boulons: 16mm et 19mm
Fil de Bolt: M3
Poids: 44g
Branchez Moteur: 3.5mm Bullet Connector

  • Kv ( rpm / v) 1130.00
  • Max Current (A) 13.00
  • Résistance ( mh ) 120.00
  • Max Tension (V) 11.00
  • (W ) 125.00
  • Arbre A ( mm ) 3.00
  • Longueur B ( mm ) 28.00
  • Can Diamètre C ( mm ) 28.00
  • Longueur Can D ( mm ) 26.00
  • Longueur totale E ( mm ) 40.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Bow | Acheteur vérifié

  • Quality
  • Overall
  • Value

Excellent

Apr 29, 2021

Saw this Motor on an online site and it has been as good as they said

Gavin | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jun 01, 2014

Has plenty of torque for a small motor. if you want a motor for a small glider, quad copter or small plane, I recommend this motor.

ibillwilson | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Sep 30, 2013

These are nice motors. I bought 3 of them a year ago, and have been happy with all of them. My favourite prop for these has been a BlueBird 9x6E, basically equivalent to the APC 9x6E. (Note that this is NOT the SlowFly prop, although the 9x4.7SF is also decent.) With 2200 mAh, 25C, 3S LiPo and 15A to 18A ESC, one of these will haul 25 oz (700 g) around the sky with authority. Search YouTube for "flying over Rouge Beach" for one example.

Andr | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Sep 22, 2013

Very good motors, used on quad. everything needed in the box. Just choose your mounting.
A bit of equilibration and done. Multicopter flies superbly with flips. 9x6 props give largely enough thrust. Loops and Rolls.

ad_wing | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jun 20, 2013

Engine very well balanced. Hardly needed to be balanced. I bought 5 engines and only one required a little adjustment, if you are too picky, otherwise do not require adjustment. Makes very little noise. Undecided what propeller to use, but probably 8" once the engine has a max load of 13A.

Yuvalko | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

May 09, 2013

Very good little motor. Got 4 of them form my quad. Very lightweight, very powerful. Feels more then 125w.

Yeswecan | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Apr 30, 2013

Got these for a quad 450. shiny stainless /chrome appearance. Very smooth and responsive with 30a blue series esc (sim.k firm.). Just warm after 10 minutes flight.Comes with prop adapters but you'll need 3mm mounting screws.
Noticed Motor spins freely and smooth with gentle flick before flight (cold), after flight (warm ),motor wont spin as well. Bearing well lubed with scorpion motor oil. Not sure if its bearing issues ,still very quite and smooth in flight.

winginman | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Apr 19, 2013

I have 8 of these motors on two quads. A couple of them seemed like the bearings were a bit rough at first and they were noisy when running. After a few hours flying time they seem to have smoothed out. Plenty of power using 8x4.7x3 props. I have tried running 10x4.7 two blade and they fly great, but seem a bit warm after an 8 min flight. Quad is more responsive with the 8x4.7 three blade. Hovers at half throttle with both size props. I have some 9x4.7 two blade on the way and will update as to how these work. So far so good. I am running the HK SS Series 18-20 amp ESC and they work fine with this motor. I like the bolt on prop adapter that come with the motors. I have crashed several times with no motor or shaft damage, even though I broke all the blades off the props. I will buy these motors again for my next project. It's going to be real hard to beat these for the price.

vaughan | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 19, 2013

Value plusplusplus! Very smooth acceleration. Very professional in all aspects at a price not really different from the rest. Comes in a sleek black foam padded box along with prop adaptors for whatever end you want to drive your prop from. Gold plugs come already attached so no faulty motor fear from soldering plugs yourself. Spoil yourself!

gwcphoto | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 04, 2013

These motors are excellent. I bought 5 of these (4plus1 spare) for a quad copter and the 4 I used worked perfectly and consistently. the bearings are smooth, and stayed that way after about an hour of various flying indoor and out in the cold and snow. The insulation is a bit thin though, and one of the wires of one of the motors got knicked in a crash. Still works though ;) I use these with the cheap plastic 8x4.5 props, they work well.

  1. 1
  2. 2
Fichiers clients
Drawing Download [85]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!