New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Aerodrive SK3 - 3530-1150kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 3530-1150kv Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

22,37 €
Statut:
En stock.
SKU:
SK3-3530-1150
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois. Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Spécifications:
Active: 28T
Voltage: 3 ~ 4S Lipoly
RPM / V: 1150K
Résistance interne: 0.069Ohm
Max Chargement: 24A
Puissance: 330W
Shaft Dia: 4.0mm
Trous de boulons: 25mm
Fil de Bolt: M3
Poids: 76g
Branchez Moteur: 3.5mm Bullet Connector

  • UGS SK3-3530-1150
  • Brand SK3
  • Poids 167.0000
  • Longueur 110.00
  • Packaging Width 45.00
  • la taille 80.00
  • Kv ( rpm / v) 1150.00
  • Max Current (A) 24.00
  • Résistance ( mh ) 69.00
  • Max Tension (V) 15.00
  • (W ) 330.00
  • Arbre A ( mm ) 4.00
  • Longueur B ( mm ) 31.00
  • Diamètre C ( mm ) 37.00
  • Longueur Can D ( mm ) 10.00
  • Longueur totale E ( mm ) 52.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought 4 of these, but 2 are bad. One will not spin up when the others do and I tried 3 esc's. The other threw a magnetic and will periodically bind and quit. I've been having a lot of trouble with HK's products lately and found Ebay and others a lot more compliant when dealing with duds.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 4 of these, but 2 are bad. One will not spin up when the others do and I tried 3 esc's. The other threw a magnetic and will periodically bind and quit. I've been having a lot of trouble with HK's products lately and found Ebay and others a lot more compliant when dealing with duds.

built is good, 2 way of installation

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

built is good, 2 way of installation

Decided to try this motor on my new Mini Ultra Stick. I now have unlimited vertical with a 11-5.5 prop. I would recommend this for anyone that wants this kind of performance. I'm using 3S 2200Ah 60C Zippy compact batteries and they seem the perfect match for this motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Decided to try this motor on my new Mini Ultra Stick. I now have unlimited vertical with a 11-5.5 prop. I would recommend this for anyone that wants this kind of performance. I'm using 3S 2200Ah 60C Zippy compact batteries and they seem the perfect match for this motor

Shipped from Hong Kong to Saskatchewan Canada in 29hours and 5 minutes using HK's standard shipping. WOW!!! Product arrives as described and works flawlessly.

Will be using this in my FliteTest Blunt Nose Versa Wing. With an 40A ESC (was laying around) and a 10x5 APC E prop, two 3C 2700MaH batteries in parallel. Should move it with authority.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Shipped from Hong Kong to Saskatchewan Canada in 29hours and 5 minutes using HK's standard shipping. WOW!!! Product arrives as described and works flawlessly.

Will be using this in my FliteTest Blunt Nose Versa Wing. With an 40A ESC (was laying around) and a 10x5 APC E prop, two 3C 2700MaH batteries in parallel. Should move it with authority.

Great motor, I use for my PA Addiction 3D, turnigy plush 40A, 2200mA 3S,
APC 11x5.5, 9min flight time !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor, I use for my PA Addiction 3D, turnigy plush 40A, 2200mA 3S,
APC 11x5.5, 9min flight time !

today i tested the motor...set up 3s 2200 esc 40 amp prop 11x 5,5 apc eletric.
after 3 minutes of hovering the motor is burned out and the stator is on fire!!!
my model weight 850 gr full
bad product

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

today i tested the motor...set up 3s 2200 esc 40 amp prop 11x 5,5 apc eletric.
after 3 minutes of hovering the motor is burned out and the stator is on fire!!!
my model weight 850 gr full
bad product

Just had one of these seize up after 50 flights in a J-Power P-38 Lightning. Luckily was able to throttle back the other motor and dead stick belly land her with no damage.
Until now it's been an excellent motor; smooth and powerful with 9x7 Master Airscrew prop, 40A Turnigy Plush ESC and 4S ZIppy Compact 2700mAh 35C batteries.
It was a hot day today and the motors don't get much cooling airflow so they were worked quite hard. May order 2 more and replace the other as well, or go for a little slower motor to turn a 10x7 3-bladed prop.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just had one of these seize up after 50 flights in a J-Power P-38 Lightning. Luckily was able to throttle back the other motor and dead stick belly land her with no damage.
Until now it's been an excellent motor; smooth and powerful with 9x7 Master Airscrew prop, 40A Turnigy Plush ESC and 4S ZIppy Compact 2700mAh 35C batteries.
It was a hot day today and the motors don't get much cooling airflow so they were worked quite hard. May order 2 more and replace the other as well, or go for a little slower motor to turn a 10x7 3-bladed prop.

I am very very very disappointed from these motors. I bought 5 of them and 2 have a loose shaft. Two of the five motors vibrate a lot more than the rest. This is not such a big problem BUT when i tested with a 8.5x4.5 Prop one of the motors started smoking and burning at 25pcnt throttle.

I taught this was an upgrade from the NTM motors but this is VERY VERY bad. I am VERY disappointed ... i am NEVER gonna buy motors at hobbyking again .. i am sorry but I never saw a motor burning EVER. Dont waste your money and buy good quality from other brand.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am very very very disappointed from these motors. I bought 5 of them and 2 have a loose shaft. Two of the five motors vibrate a lot more than the rest. This is not such a big problem BUT when i tested with a 8.5x4.5 Prop one of the motors started smoking and burning at 25pcnt throttle.

I taught this was an upgrade from the NTM motors but this is VERY VERY bad. I am VERY disappointed ... i am NEVER gonna buy motors at hobbyking again .. i am sorry but I never saw a motor burning EVER. Dont waste your money and buy good quality from other brand.

Shaft bent very easily after a mild crash. I had 2 of these motors, and both of them are now out of balance after the first use!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Shaft bent very easily after a mild crash. I had 2 of these motors, and both of them are now out of balance after the first use!

Not used as yet, will provide feedback later,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not used as yet, will provide feedback later,

  1. 1
  2. 2
  3. 3
Customer files
SK3-3530(DT3007-14P) MOTOR (edited).pdf Download [131]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save