Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Aerodrive SK3 - 3530-1340kv Brushless Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 3530-1340kv Brushless Outrunner Motor

Prix:

Now save économisez 0,00 € 0,00 €

31,00 €
Expédié de:
  • USA
  • Global
Déjà acheté
Heure d'arrivée estimée: Aucune Heure D'arrivée Estimée [ ? ]
Statut:
Epuisé!
SKU:
SK3-3530-1340
Livraison gratuite? Cliquez ici pour apprendre plus!

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 24T
Tension: 2 ~ 3S Lipoly
RPM / V: 1340 kv
Résistance interne: 0,052 Ohm
Max Chargement: 28A
Puissance: 375W
Shaft Dia: 4.0mm
Trous de boulons: 25mm
Fil de Bolt: M3
Poids: 76g
Branchez Moteur: 3.5mm Bullet Connector

  • Kv ( rpm / v) 1340.00
  • Max Current (A) 28.00
  • Résistance ( mh ) 52.00
  • Max Tension (V) 11.00
  • (W ) 375.00
  • Arbre A ( mm ) 4.00
  • Longueur B ( mm ) 32.00
  • Can Diamètre C ( mm ) 35.00
  • Longueur Can D ( mm ) 30.00
  • Longueur totale E ( mm ) 52.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

none | Acheteur vérifié

  • Overall
  • Quality
  • Value

Excellent replacement motor

Jun 17, 2022

motor that came with train star assent was pure junk. locked up after a few minutes. The SK3 replaced it after spacers installed.

Alain | Acheteur vérifié

  • Overall
  • Quality
  • Value

OK

Nov 12, 2021

Bon produit à un prix abordable

Rudog | Acheteur vérifié

  • Overall
  • Quality
  • Value

Motor can be excellent.....

Dec 16, 2019

....replacement for some of the Avios and Durafly r/c aircraft models

David | Acheteur vérifié

  • Overall
  • Quality
  • Value

Amazing motor!

Mar 10, 2017

I use this for my Flight Test foam board airplanes the require the C power pack and it turns my planes into rocket ships! I use a 9x6 prop with a Plush 40 amp esc and a 3S 2200 40 c battery. That is the magical combination and is fantastic!!!

michael | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 23, 2016

So disappointed: The SK3 3530 out of the box looks like quality construction but I needed to reverse the position of the shaft. Done it before should be no problem right? This motor does not come with an allan wrench like the Eflite motors do, after selecting the proper wrench size and getting a good tight fit, the set screws stripped out because they were too soft, that's it, the motor is now useless 5minutes out of the box, maybe stick with Eflite if you anticipate needing to reverse the shaft position.

Matthew | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2015

"A leap forward in quality" WHAT A JOKE. I bought 4 of the motors, initially one was faulty (Bad bearing). Hobby king replaced it. Now, another has failed. I'm staying away from cheap crap with projects I care about. I would advise you to do the same.

Gabe | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2014

I use this motor for ssc combat. 4 cell 2650 mah 40 c batt. 8x3 ma combat prop. 60 amp plush esc. This combo flys circles around glow powered ssc combat planes. Give it a try you won't regret it.

Gyula | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 22, 2014

Few measurements of static thurst:
GWS sw 9x4.7, 441w,1200g; (Best power, 1500 mAh 3s 20 c is on limit!!!)
Graupner e 8x4, 300w, 840g; (Best efficiency)
APC e 8x6, 420w, 780g; (lost efficiency not a good choice)
GWS sw 8x4.7, 420 w, 1010g; (More power if you need, but lost efficiency!)
Excellent for 500-600 g 3d, with avarage half throtle 10-12 min on 1500 mAh (with the help of wind :-)), 3s with graupner prop , or best power with GWS sw 9x4.7 if you have enough accu power with low weight.

CReal | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 30, 2013

I just wrote a review yesterday but I have to write this, with the smallest carbon fiber folding prop that can be purchased here that is the 9,5x5 size this motor draws 32amps static on the ground at 12500rpm, and in the air 28amps 13500rpm 10,2v... What the hell read the description, what is written there is what you get. Amazing motor!

CReal | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 29, 2013

Had my first flight with this motor with a phoenix 2000 glider. The plane comes with a folding 10x6 prop, too much for this but here is some data, will get smaller prop.
tgy super brain 40a data with 2.2 25-50c nano:
no load current 3.3a 20k rpm
10.6v 49a 10800rpm on the ground static
10.5v 43a 11700rpm in the air.(about 100-110km/h)
note that on 80pcnt throttle amp draw is 25-26a at 10600rpm, so with a smaller prop it spins like there is no tomorrow for sure.

Will get smaller prop but its a really great motor, will buy sk3 or ntm in the future.

  1. 1
  2. 2
  3. 3
Fichiers clients
another view from mike rimfir.10 vs sk3 Download [1367]
rimfire.10 vs sk3 3530 1340 from mike Download [1428]
SK3-3530(DT3007-14P) MOTOR (edited).pdf Download [131]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires