S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 3536-1400kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 3536-1400kv Brushless Outrunner Motor

QTY:

Now save enregistrer 0,00 € 0,00 €

23,64 €
Rating:
Stock:
Poids
212 g
SKU:
SK3-3536-1400

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Combinez

et économisez plus
acc
Description
du

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 12T
Voltage: 3 ~ 4S Lipoly
RPM / V: 1400 kv
Résistance interne: 0,021 Ohm
Max Chargement: 40A
Puissance: 590W
Shaft Dia: 5.0mm
Trous de boulons: 25mm
Fil de Bolt: M3
Poids: 110g
Branchez Moteur: 3.5mm Bullet Connector

Product
Specifications

Informations supplémentaires

  • Référence:
    SK3-3536-1400
  • Brand:
    Turnigy
  • Poids (g)
    212.00
  • Longueur
    110.00
  • Largeur:
    45.00
  • Taille:
    80.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I bought it for my fpv 1900mm skywalker.I lot of power with 3s battery and 9x6 prop!I fly with 12000mah batteries!
Quality
Value
Overall
Quality
Value
Overall
Went with HK recommendations of motor ESC and prop for Bela Trike. Watched the motor go up in flames on first run up to full speed.I think it was just a fluke but I am not very experienced at brushless motors yet.
Quality
Value
Overall
Quality
Value
Overall
motor cremat en 2 minuts. un desastre. una 11x7 i 4s. tindria que aguantar de sobres.
si algu se li ocurreix comprar'ho. pala petita.
Quality
Value
Overall
Quality
Value
Overall
WOW!!! What a Motor!!! Put a 9x6E (PRODUCT ID: TGS9x6E) on it with a 2200ma 3 cell and pulled an Amazing 398.5 Watts at 38.92 amps and 11.48 volts. Have it installed in a Multiplex Dogfighter with a weight of 1.6lb/750g. This plane should skyrocket. I'm expecting to fly most of time at half throttle and still have a speed demon. A very quiet motor with a very smooth range of power. I really like the power curve as it accelerates. I will only by Turnigy SK3 motor in the future. The quality is certainly built in.
Quality
Value
Overall
Quality
Value
Overall
One tuff motor it has heaps of grunt in my sky surfer but a good replacement for my asw28 adds the punch to climb outs
Quality
Value
Overall
Quality
Value
Overall
I have this motor in a Stryker 27Q using a plush 100A ESC on 4S 2450mAh and a 8x6 APC prop and the power is insane. Hand launching the plane is so easy now because of the instant torque. And the top speed is so fast I just limit it to short controlled bursts so I don't loose control. This is one impressive little motor, make sure you get the adapter if you are going to run it as a pusher.
Quality
Value
Overall
Quality
Value
Overall
Great motor. I use it in my HobbyKing EPP FPV plane and it has got power. I use this motor with HK SS Series 50-60A ESC (make sure you buy a separate UBEC with that ESC), 10x4.5 SF prop and a 3s 5000mAh 20C Turnigy battery. I think it's a great setup.
Quality
Value
Overall
Quality
Value
Overall
I put this SK3 motor on a Parkzone Bf-109 foamy with a Turnigy Plush 40A speed control. I am using a 2-bladed 9X6 prop. My battery is a Turnigy 3000mAh 3S. I had to dial the ATV back on the max throttle to keep below the 40A limit. The model is super fast with unlimited vertical. I will definitely be buying more SK3 motors.
Quality
Value
Overall
Quality
Value
Overall
Really good Motor. Comes in nice box! Great finish!
Quality
Value
Overall
Quality
Value
Overall
This is a great motor. With a 3s 2200mah, a 9x6 prop, 40a hk brushless esc this motor can make my 36" contender go vertical at 6000'. Motor was barely warm after a spirited flight. I would recommend this motor to anyone looking for a high quality motor. Its about the same physical size as an NTM 35-30 1400kv motor but with much more power. The NTM couldnt handle the 9x6, but this motor does the job.
Quality
Value
Overall
View all reviews
Upload
Videos
  • big fat motor

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.