S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • USA
  • Global

Turnigy Aerodrive SK3 - 3548-840kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 3548-840kv Brushless Outrunner Motor

QTY:

Now save enregistrer 0,00 € 0,00 €

34,00 €
Rating:
Stock:
Poids
288 g
SKU:
SK3-3548-840

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Combinez

et économisez plus
acc
Description
du

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui. Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois. Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 10T
Voltage: 3 ~ 4S Lipoly
RPM / V: 840kv
Résistance interne: 0.025Ohm
Max Chargement: 50A
Puissance: 750W
Shaft Dia: 5.0mm
Trous de boulons: 25mm
Fil de Bolt: M3
Poids: 174g
Connecteurs des moteurs: Bullet connecteur 3.5mm

Product
Specifications

Informations supplémentaires

  • Référence:
    SK3-3548-840
  • Brand:
    Turnigy
  • Poids (g)
    288.00
  • Longueur
    110.00
  • Largeur:
    45.00
  • Taille:
    80.00
  • Kv ( rpm / v)
    840.00
  • Unit Weight (g)
    174
  • Max Currents (A):
    50.00
  • Résistance ( mh ):
    25.00
  • Max Tension (V)
    15.00
  • (W )
    750.00
  • Arbre A ( mm ):
    5.00
  • Longueur B ( mm ):
    49.00
  • Diamètre C ( mm )
    37.00
  • Longueur Can D ( mm )
    28.00
  • Longueur totale E ( mm ):
    70.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
super monter puissant et pas trop gourmand en ?nergie monter sur une aile fx 61 avec h?lice repliable 11x8 pour de long vole FPV
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fliege diesen Motor in meiner MX2 Green 3D 1400mm mit 12X6 APC Style

Das Flugzeug steigt senkrecht, ich bin sehr zufrieden mit dem Motor
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent motor! Used this in my 48" Extra 330sc and it performs very well. Tested using 12x6, 13x6.5 and 14x7 wooden props and they all give strong thrust & power to perform 3D acrobatics, though 14x7 gives strongest power.

Also the motor is surprisingly quiet and doesn't make alot of noise which is very nice.

Overall a great motor, highly recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mounted on a plane HobbyKing MXS EPP / Light 3D Plywood 14x7E prop, the ESC must be 70 amps; flying at a height of 2,300 meters above sea level using a battery of 2,200ma 4s 40c.It provides six minutes of flight combined 3D and pattern.
Incredible engine power and barely heats, coprare more! Youtub: PT_kTyeoHNU

Montado en un avion HobbyKing MXS EPP/Light Plywood 3D con helice 14x7E, el ESC debe de ser de 70 ampers; volando a una altura de 2,300 metros sobre el nivel del mar y usando una bateria de 4s 2,200ma de 40c. proporciona 6 minutos de vuelo combinado de 3D y patron.
Increible potencia y el motor apenas se calienta, coprare ms! Youtub: PT_kTyeoHNU
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
4 flights so far on my PA XR52. Using a Vox 13x5 prop with a 4S battery the power is great. The previous hyperi*n motor couldnt handle all the knife edge spins and was getting a bit rough, so will need to see how this one holds up. Nice and smooth motor, and seems pretty solid so hopefully it is up to some hard 3D flying!.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
One of the front bearings has gone from slightly rumbly when purchased, to rather noisy after only 2 flights. Other than that, its been a good motor so far with great power and a nice finish. Good value for money but the bearing issue stops it being a 5 crown product for me.

Bell was nicely balanced, the prop adaptor is well centered and everything fits great.
Drawing 40A peak with a 12x7 master airscrew prop on 4s.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mounted with a 12x6 folding prop an 4s configuration is great power for a go discover or a similar class airplane. Ps: I mounted in a Go discover, but I had to modify the inner space of the plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have more SK-series motors in unse and they work very good. No issues so far. Recommended product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Always bench test electric rc motors, without a prop, first thing I noticed, the rear of the motor warms up, fast, it does accel and decel smooth. Installing it Running a 4 cell, 2600 lipo, 50 amp ESC, 11 x 6 Masterscrew prop. stats are 47 - 48 amp, 565 watts full throttle, pulling 4.7 - 5.1 pounds. Should be good for my 3.5 pound foamy sbach, seeing how I am not a 3D guy ( yet ), just like to do the rolls, inverts, crazy 180's.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ich habe diesen Motor mit einem 70A Brick in einem Talon verbaut. 12" Prop mit 2x4s 5000mAh.
Funktioniert einwandfrei. Werde aber noch zustzlich ffnungen fr Frischluft schaffen, damit der Regler besser gekhlt wird. Top Motor!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

D'autres personnes ont tagué ce produit avec :

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.