New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Aerodrive SK3 - 4240-530kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 4240-530kv Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

31,99 €
Statut:
En stock.
SKU:
SK3-4240-530
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 14T
Tension: 4 ~ 5S Lipoly
RPM / V: 530kv
Résistance interne: 0,023 Ohm
Max Chargement: 46A
Puissance: 795W
Shaft Dia: 5.0mm
Trous de boulons: 25mm
Fil de Bolt: M3
Poids: 194g
Branchez Moteur: 3.5mm Bullet Connector

  • UGS SK3-4240-530
  • Brand SK3
  • Poids 338.0000
  • Longueur 135.00
  • Largeur 60.00
  • la taille 90.00
  • Kv ( rpm / v) 530.00
  • Max Current (A) 46.00
  • Résistance ( mh ) 23.00
  • Max Tension (V) 19.00
  • (W ) 795.00
  • Arbre A ( mm ) 5.00
  • Longueur B ( mm ) 50.00
  • Diamètre C ( mm ) 42.00
  • Longueur Can D ( mm ) 23.00
  • Longueur totale E ( mm ) 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Just received the motor, very disappointed in the quality of the supplied hardware. Why are these motors not supplied with socket head bolts for both mounting the prop adapter and motor mounts, further the prop adapter is too light for a motor of this rated power driving a 14X7 prop on a 5S system. further the bullet connectors are too small to fit my 3.5mm connectors on the ESC. A lot of fiddling about to get it right, I will report once the motor is in service. My recent purchase of a SK3 motor was also disappointing in the same area, though it performs brilliantly in the air.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received the motor, very disappointed in the quality of the supplied hardware. Why are these motors not supplied with socket head bolts for both mounting the prop adapter and motor mounts, further the prop adapter is too light for a motor of this rated power driving a 14X7 prop on a 5S system. further the bullet connectors are too small to fit my 3.5mm connectors on the ESC. A lot of fiddling about to get it right, I will report once the motor is in service. My recent purchase of a SK3 motor was also disappointing in the same area, though it performs brilliantly in the air.

Nice one. But too bad there is no manual and advices for setting the timing and switching Frequency.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice one. But too bad there is no manual and advices for setting the timing and switching Frequency.

Motor ist hochwertig verarbeitet und leistungsstark. An Zippy 5s und Aeronaut CC PP 14x8 Stomaufnahme im Stand 43A. Leider passt der Propadapter nicht zum Motor, da nur M6 und 24mm lang, also viel zu kurz. Es ist der gleiche Propadapter wie bei den 35xx Motoren. Schade !!! Wnschenswert bei dieser Motorengre wre ein Adapter mit mindestens 35mm Lnge und M8 Gewinde.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor ist hochwertig verarbeitet und leistungsstark. An Zippy 5s und Aeronaut CC PP 14x8 Stomaufnahme im Stand 43A. Leider passt der Propadapter nicht zum Motor, da nur M6 und 24mm lang, also viel zu kurz. Es ist der gleiche Propadapter wie bei den 35xx Motoren. Schade !!! Wnschenswert bei dieser Motorengre wre ein Adapter mit mindestens 35mm Lnge und M8 Gewinde.

So far so good, after I set the timing to 15deg I am getting 45amps and about 950w on 5 cells with 15x8. Will test fly soon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So far so good, after I set the timing to 15deg I am getting 45amps and about 950w on 5 cells with 15x8. Will test fly soon

Customer files
SK3-4240(DT3520-14P) MOTOR (edited).pdf Download [122]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save