New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Aerodrive SK3 - 4250-500kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 4250-500kv Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

33,64 €
Statut:
En stock.
Poids
425 g
SKU:
SK3-4250-500
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 10T
Tension: 4 ~ 5S Lipoly
RPM / V: 500kv
Résistance interne: 0,018 Ohm
Max Chargement: 57A
Puissance: 1350W
Shaft Dia: 5.0mm
Trous de boulons: 25mm
Fil de Bolt: M3
Poids: 269g
Branchez Moteur: 3.5mm Bullet Connector

  • UGS SK3-4250-500
  • Brand SK3
  • Poids (g) 425.00
  • Longueur 135.00
  • Largeur 30.00
  • la taille 90.00
  • Kv ( rpm / v) 500.00
  • Unit Weight (g) 269
  • Max Current (A) 57.00
  • Résistance ( mh ) 18.00
  • Max Tension (V) 19.00
  • (W ) 1350.00
  • Arbre A ( mm ) 5.00
  • Longueur B ( mm ) 58.00
  • Diamètre C ( mm ) 42.00
  • Longueur Can D ( mm ) 34.00
  • Longueur totale E ( mm ) 80.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I'm flying this motor with an 15*8 prop and at full throttle it pulls 45 amp out of a 3600 6 cell turnigy Lipo.
the airplane is a Funcub XL from Multiplex

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm flying this motor with an 15*8 prop and at full throttle it pulls 45 amp out of a 3600 6 cell turnigy Lipo.
the airplane is a Funcub XL from Multiplex

very powerful motor with the good price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very powerful motor with the good price

Bought this motor and a turnigy 85A ESC. Mounted this motor on the 1800mm Beaver, battery was a Turnigy 5S 5000mAh 20C LiPo, ESac was also a Turnigy. Propeller was a Turnigy wooden prop 14 X 6. After flying for about 10mins with about 50-75pcnt throttle, the motor and esc was warm to the touch. I will buy again as this motor offers good value for money !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this motor and a turnigy 85A ESC. Mounted this motor on the 1800mm Beaver, battery was a Turnigy 5S 5000mAh 20C LiPo, ESac was also a Turnigy. Propeller was a Turnigy wooden prop 14 X 6. After flying for about 10mins with about 50-75pcnt throttle, the motor and esc was warm to the touch. I will buy again as this motor offers good value for money !

Top-Motor bei 4S-5000/40C, AERON 17x9 bis 17x10 - 5800-6000U/min
48-58A / 15,6-15,4V = 748-895W. Superleise, super Rundlauf. Vitesse 3m, 3,2Kg - traumhaftes Steigen, und sehr flotter Gangart! Motor wird im Normalbetrieb handwarm (40C). Besser gehts kaum. Und das fr den Preis - Sehr empfehlenswert!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Top-Motor bei 4S-5000/40C, AERON 17x9 bis 17x10 - 5800-6000U/min
48-58A / 15,6-15,4V = 748-895W. Superleise, super Rundlauf. Vitesse 3m, 3,2Kg - traumhaftes Steigen, und sehr flotter Gangart! Motor wird im Normalbetrieb handwarm (40C). Besser gehts kaum. Und das fr den Preis - Sehr empfehlenswert!

Super powerful well made motor!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super powerful well made motor!

Pulls my Katana 50ep around nicely on a 5S pack and a 15x8 prop. Cant complain.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pulls my Katana 50ep around nicely on a 5S pack and a 15x8 prop. Cant complain.

As usual, SK3 are really good motors, although they could make prop adapters with harder material, included one is a bit to soft. Anyway softer than ground haha!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As usual, SK3 are really good motors, although they could make prop adapters with harder material, included one is a bit to soft. Anyway softer than ground haha!

Great motor. I put it in an oldtimer (Red Zephyr) on 5s with a beautiful wooden 15x4.5 prop. Getting 680 watts for a 5.2 lb plane flies all day or so it seems.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor. I put it in an oldtimer (Red Zephyr) on 5s with a beautiful wooden 15x4.5 prop. Getting 680 watts for a 5.2 lb plane flies all day or so it seems.

SK3 series engines are of very good quality.

They deliver the promised power

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

SK3 series engines are of very good quality.

They deliver the promised power

Auch diesen Motor habe ich seit einiger Zeit in Betrieb. Bin mit der Leistung und der Qualitt sehr zufrieden. Und der Preis ist auch ok.
Fuer Kunstflug bei 3kg mehr als ausreichend Durchzug

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Auch diesen Motor habe ich seit einiger Zeit in Betrieb. Bin mit der Leistung und der Qualitt sehr zufrieden. Und der Preis ist auch ok.
Fuer Kunstflug bei 3kg mehr als ausreichend Durchzug

  1. 1
  2. 2
Customer files
SK3-4240(DT3520-14P) MOTOR (edited).pdf Download [122]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save