S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 5045-500kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 5045-500kv Brushless Outrunner Motor

QTY:

Now save enregistrer 0,00 € 0,00 €

37,82 €
Rating:
Stock:
Poids
475 g
SKU:
SK3-5045-500

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Combinez

et économisez plus
acc
Description
du

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui. Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois. Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis. Specs.Turns: 16TVoltage: 5 ~ 7S LipolyRPM / V: résistance 500kvInternal: 0,022 OhmMax Chargement: 60AMax Puissance: 1350WShaft Dia: trous de 6.0mmBolt: fil de 25mmBolt: M4Weight: 280gMotor Fiche: Bullet 4mm Connector

Product
Specifications

Informations supplémentaires

  • Référence:
    SK3-5045-500
  • Brand:
    Turnigy
  • Poids (g)
    475.00
  • Longueur
    135.00
  • Largeur:
    60.00
  • Taille:
    90.00
  • Kv ( rpm / v)
    500.00
  • Max Currents (A)
    60.00
  • (W ):
    1350.00
  • Longueur B ( mm ):
    49.00
  • Longueur Can D ( mm )
    22.00
  • Max Tension (V)
    26.00
  • Arbre A ( mm ):
    6.00
  • Unit Weight (g):
    280
  • Diamètre C ( mm )
    49.00
  • Longueur totale E ( mm )
    70.00
  • Résistance ( mh ):
    22.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is runing so smooth with awsomne power. Tried it on a HK Piper ( the big white one ) and with 6S and a 14x8 prop it went unlimited vertical. Very nice made and reliable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
In one word Awesome. Excellent value/quality. I run this on the little apple with 14x7 prop and 6S 4000 zippy compact. 980 watts 48A and endless vertical power. Flying weight of the little Apple is 2900 grams. Shame Little Apple is not selling anymore its a very nice plane for training and aerobatics, i highly recommend this too.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A very good motor at a good price. Fitted to a scale Art Jesters Jeep which weighs over 6Lb and flies it around quite fast with good vertical performance. Test data on a 14 x 7 APC prop,
Turnigy 3000mah 6S 20C battery, 80 amp esc. Amps 40, Watts 880 Thrust 8 Lbs. I fly for about 4.5 mins and have nearly 50pcnt battery left with the motor cool even though it is in an enclosed cowl. Fitting a bigger prop will give more power but for this plane and battery it is perfect.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use them on my 60" Extreme flight planes with a 17X6 E prop from Hk. Over 1500watts on 6s. I like it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I haven't flew this motor yet. It looks good but I ran into a problem right away. The prop adapter shaft was so soft that merely tightening the prop was enough to mess up the threads. Due to a poor reputation for warrenty service I just ordered a new one which seems to be okay. I did run the motor on the bench.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nutze den Motor in einer GW Slick 61" an 6S300 mit 15X8. Der Motor läuft angenhem leise und hat Kraft ohne Ende. Leider kommt der Rotostar Regler damit nicht sonderlich gut zurecht. Ab und zu quitscht es bei schnellen Gasstößen. Der Motor selbst ist aber Top

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome motor- Ive installed this on my Nemesis. 15x12 prop on 6 Cell gives me 1100 watts at 56 amps and 3.6 Kg static thrust. Im at very high altitude but these figures prove how good this motor is.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
used a 6 s 4000 25-50c nano tec lipo. 16x10 prop =900w 50amps draw. I have not tried 7s but I think 1350 would be very optimistic. but runs cool at 50 amps. flown once on a seagull flybaby a 10minute flight. loads of power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tested with 5000mAh 6S 25C, 75A C.C. ESC, 13X8 MAS 3 Blade. Max (925W) 42A @8600RPM. Ran super smooth, only warm to the touch after 7min run.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
have run this motor in an extreme flight 64" MXS for a couple of years now. No issues whatsoever. Runs cool and plenty powerful on 6s, unlimited vert and easy pullout from falling maneuvers. have not had any hardware issues. Use locktite and do not over tighten bolts, it not a gasser. I use sk3 motors in all of my electrics and see no reason whatsoever to buy another brand for 2-4 times the price.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.