S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 5045-660kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 5045-660kv Brushless Outrunner Motor

QTY:

Now save enregistrer 0,00 € 0,00 €

37,18 €
Rating:
Stock:
Poids
470 g
SKU:
SK3-5045-660

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Combinez

et économisez plus
acc
Description
du

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de plusieurs moteurs principaux fabricants sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 12T
Tension: 4 ~ 5S Lipoly
RPM / V: 660kv
Résistance interne: 0,014 Ohm
Max Chargement: 60A
Puissance: 1410W
Shaft Dia: 6.0mm
Trous de boulons: 25mm
Fil de Bolt: M4
Poids: 280g
Branchez Moteur: 4mm Bullet Connector

Product
Specifications

Informations supplémentaires

  • Référence:
    SK3-5045-660
  • Brand:
    Turnigy
  • Poids (g)
    470.00
  • Longueur
    135.00
  • Largeur:
    60.00
  • Taille:
    90.00
  • Kv ( rpm / v)
    660.00
  • Max Currents (A)
    60.00
  • (W ):
    1410.00
  • Longueur B ( mm ):
    49.00
  • Longueur Can D ( mm )
    23.00
  • Max Tension (V)
    19.00
  • Arbre A ( mm ):
    6.00
  • Unit Weight (g):
    280
  • Diamètre C ( mm )
    49.00
  • Longueur totale E ( mm )
    71.00
  • Résistance ( mh ):
    14.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Currently running this motor in a 3 kg nemesis (HK).
15x13 prop 4500mah 5s.
Very good speed and unlimited vertical.
Being careful on the throttle results in long flight time with all components returning only mildly warm.
After 6 flights very happy so far.
Quality
Value
Overall
Quality
Value
Overall
Thisd is my second SK 3 motor and thea are really good quality. Nicely machined and working very smooth. Goood power. Use it with a 15x8 Prop on 5S and it gives around 5KG of thrust. Recommended motor.
Quality
Value
Overall
Quality
Value
Overall
Fitted this motor into a SIG Fourstar with an APC style 11 X 7 prop, Zippy Flightmax 4000 mah 5S 1P 40C battery and a Ripmax Quantum 60amp ESC. Static test gave 595watts with battery at 94pcnt. Motor stopped 3minutes into first flight. Motor removed from model, shaft can be turned by hand but feels rough and smells of hot insulation. HK are asking for video evidence but I'm not going to risk my ESC by trying to run this motor again. From the lack of response from HK to my messages, after the video request, I assume they do not intend to honour the warranty. I will not be buying another SK3 as quality issues are also being reported in reviews on the Global Warehouse listing for this motor.
Quality
Value
Overall
Quality
Value
Overall
put on a 1450mm FMS p51B .
Good power compared to the original engine , probably over 25pcnt. Compatible with esc 65A fms (cold after) .
4s in 3300 and original propeller 4 blades, 6 minutes ... I'll put an APC 15 * 7 to save a few minutes .
Quality
Value
Overall
Quality
Value
Overall
motore x il mio sbharc spero che tira piu del originale ottimo qualita prezzo
Quality
Value
Overall
Quality
Value
Overall
Hab den Motor in 2 Flugzeuge um die 3 Kg verbaut. Mit einer 15x8 Turnigy Light Electric (wood) und 5S kommen so gute 5kg Standschub raus.
Quality
Value
Overall
Quality
Value
Overall
I have been flying this motor with 5S 5000 mAh on Hyperion helios 63e for some 15 flights and suddenly magnets went off and motor stopped. Motor will go direct to the bin. Fortunately I could land on without problems.
Bad quality motor HobbyKing.
Quality
Value
Overall
Quality
Value
Overall
I use this motor in my Black Horse Models Mustang 60 size airframe. Perfect fit in cowling and weight balance. My setup is Sentilon HV 100A ESC, Turnigy Nanotech 45-90C 6S lipo and 13x8 APC (glow) prop. At full tilt, this setup draws around 50 amps. Setup is good for 6 min. WOT flying. No overheating what so ever. This motor pulls hard.. Just short of enough pulling power to shear off the wings. unlimited vertical, and level 140km/h average low pass. Absolutely the best combination Ive done on this airframe.
Quality
Value
Overall
Quality
Value
Overall
Perfecte motor voor een Calmato 40 (lees Soar) met een 12x8 3 blads prop van master airscrew. Superstille combi en verschrikkelijk veel power!! Toestel is binnen 2 meter los en met half gas unlimited climb!! Vlieg hem met 5 cel 5000mAh Nano!!
Al met al een erg betrouwbare en robuste motor, ook na /- 35 uur afbeulen!!
Quality
Value
Overall
Quality
Value
Overall
OMG !!! That's power for sure !

I mounted it on a katana 50 ep (3.1Kg) with a 14x10 prop and 5S lipo.

result : ~ 58A @ 72pcnt throttle but unlimited vertical. I said 72pcnt because i was forced to lower throttle maximum on my radio to stay under 60A. A nice one !
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.