New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Aerodrive SK3 - 6354-215kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 6354-215kv Brushless Outrunner Motor

Discontinued Product

Please continue searching for a similar product.
Poids
790 g
SKU:
SK3-6354-215
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de nombreux grands constructeurs automobiles sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 22T
Tension: 10S Lipoly
RPM / V: 215kv
Résistance interne: 0,032 Ohm
Max Chargement: 65A
Puissance: 2100W
Shaft Dia: 8.0mm
Trous de boulons: 32mm
Fil de Bolt: M4
Poids: 485g
Branchez Moteur: 4mm Bullet Connector

  • UGS SK3-6354-215
  • Brand -
  • Poids (g) 790.00
  • Longueur 170.00
  • Largeur 70.00
  • la taille 130.00
  • Kv ( rpm / v) 215.00
  • Max Current (A) 65.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 37.00
  • (W ) 2100.00
  • Arbre A ( mm ) 8.00
  • Longueur B ( mm ) 54.00
  • Diamètre C ( mm ) 59.00
  • Longueur Can D ( mm ) 28.00
  • Longueur totale E ( mm ) 83.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

All of the listed specs are incorrect. I just measured mine - the bare motor is 52.7mm long and 490g, motor bolt-on adapter and X-mount is 65.7mm long and 554g. More to come after I run it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

All of the listed specs are incorrect. I just measured mine - the bare motor is 52.7mm long and 490g, motor bolt-on adapter and X-mount is 65.7mm long and 554g. More to come after I run it.

Well, mine has just done the same as Luckiestpants, same setup, in their 1.9m MX2, only had six flights!!!! So much for getting better. Should of got a Hacker, will do now.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well, mine has just done the same as Luckiestpants, same setup, in their 1.9m MX2, only had six flights!!!! So much for getting better. Should of got a Hacker, will do now.

Threw it magnets and seized on the 4th ever flight. Used in a Sebart Katana 120 on 10s Zippy Lipo's and 20x10 prop. All within manufacturers recommendations. I thought the motors were getting better from Hobbyking, in my experience it's never worth chasing a warranty claim. Chalk it up yo experience.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Threw it magnets and seized on the 4th ever flight. Used in a Sebart Katana 120 on 10s Zippy Lipo's and 20x10 prop. All within manufacturers recommendations. I thought the motors were getting better from Hobbyking, in my experience it's never worth chasing a warranty claim. Chalk it up yo experience.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save