New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Aerodrive SK3 - 6364-190kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 6364-190kv Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

65,02 €
Statut:
En stock.
SKU:
SK3-6364-190
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors sont le prochain bond en avant dans la qualité du moteur et du design. Nous avons demandé aux ingénieurs de la source la meilleure qualité des aimants, des roulements et des matériaux mis à leur disposition et de développer un moteur qui ne serait pas le seul rival, mais surpasser la qualité de nombreux grands constructeurs automobiles sur le marché aujourd'hui.

Le résultat est un moteur efficace, de haut calibre en utilisant qualité doubles roulements blindés, néodyme frittés aimants et une chaîne enroulée stator en assurant un enroulement précis et cohérent à chaque fois.

Les moteurs Turnigy SK3 sont adaptés aux modélisateurs qui recherchent un moteur brushless de qualité sans compromis.

Specs.
Active: 18T
Tension: 10S Lipoly
RPM / V: 190kv
Résistance interne: 0,028 Ohm
Max Chargement: 65A
Puissance: 2450W
Shaft Dia: 8.0mm
Trous de boulons: 32mm
Fil de Bolt: M4
Poids: 697g
Branchez Moteur: 4mm Bullet Connector

 

  • UGS SK3-6364-190
  • Brand SK3
  • Poids 1005.0000
  • Longueur 175.00
  • Packaging Width 75.00
  • la taille 135.00
  • Kv ( rpm / v) 190.00
  • Max Current (A) 65.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 37.00
  • (W ) 2450.00
  • Arbre A ( mm ) 8.00
  • Longueur B ( mm ) 73.00
  • Diamètre C ( mm ) 59.00
  • Longueur Can D ( mm ) 51.00
  • Longueur totale E ( mm ) 103.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I use this motor in F3A plane with 10S Nanotech4000, SentilonHV100 (middle timing, low is not working with this combo!) and 20x12 Turnigy wooden electric propeller. Needs to be limited to 88pcnt (FX30 throttle end-point), current cca 65Amp at the beginning and motor is quite hot after 6min flight and 2,7Ah. Overall - good job for the money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor in F3A plane with 10S Nanotech4000, SentilonHV100 (middle timing, low is not working with this combo!) and 20x12 Turnigy wooden electric propeller. Needs to be limited to 88pcnt (FX30 throttle end-point), current cca 65Amp at the beginning and motor is quite hot after 6min flight and 2,7Ah. Overall - good job for the money.

I use this motor on a Black Horse Ryan STA 2.35m wingspan and about 6.5kg. Setup:

Turnigy Aerodrive SK3 - 6364-190kv

TURNIGY Sentilon100A HV 5-12S BESC (Ver4)

12s Flightmax 5000 mAh 25C

APC 18x10e prop

7600 rpm, 70A, 2940W



Motor is cool after 8 minutes of acro flight, about 41 degrees celcius. 2800 mAh used from the batteries, about 21A average.



I use 12s packs because i have them. 10s would be a better option, larger prop.



Motor is very well build. The extra large bearings supports the load very good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor on a Black Horse Ryan STA 2.35m wingspan and about 6.5kg. Setup:

Turnigy Aerodrive SK3 - 6364-190kv

TURNIGY Sentilon100A HV 5-12S BESC (Ver4)

12s Flightmax 5000 mAh 25C

APC 18x10e prop

7600 rpm, 70A, 2940W



Motor is cool after 8 minutes of acro flight, about 41 degrees celcius. 2800 mAh used from the batteries, about 21A average.



I use 12s packs because i have them. 10s would be a better option, larger prop.



Motor is very well build. The extra large bearings supports the load very good.

Customer files
SK3-6364(DT5035-14P) MOTOR (edited).pdf Download [122]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save