S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Turnigy B12-30 3850kv Inrunner

Turnigy B12-30 3850kv Inrunner

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
39 g
SKU:
TR-B1230-3850
Description
du

Aussi connu comme un moteur de classe 130S. Le TR-1230 est un excellent moteur pour les petites appications EDF ou Direct Drive. Pensez-y comme un mini jet de parc ou petite EDF pour GWS avions type de moteur.

Spec.
Kv: 3850rpm / V
Puissance: 32W
Active: 20
Résistance: 890mh
Courant au repos: .2A
ESC requis: 10A
configuration Lipo: 2-4Cell (7,4 à 14.8v)

Dimensions:
Diamètre: 12mm
Can Longueur: 30mm
Longueur de l'arbre: 10mm
Largeur de l'arbre: 1.5mm
Distants avant montage: 8.5mm
Avant la discussion Mont: M2
Poids: 18g

Product
Specifications

Informations supplémentaires

  • Référence:
    TR-B1230-3850
  • Brand:
    Non communiqué
  • Poids (g)
    39.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
  • Kv ( rpm / v)
    3850.00
  • Unit Weight (g)
    18
  • Max Currents (A):
    0.00
  • Résistance ( mh ):
    0.00
  • Max Tension (V)
    15.00
  • (W )
    32.00
  • Arbre A ( mm ):
    1.00
  • Longueur B ( mm ):
    31.00
  • Diamètre C ( mm )
    12.00
  • Longueur Can D ( mm )
    30.00
  • Longueur totale E ( mm ):
    42.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This inrunner motor looked good upon arrival. That is until I saw how thin the three wires were... So thin in fact that I never succeeded in putting the three connectors on them before the yellow wire suddenly broke flush with the can...!!!

Thus I will never know what kind of performance this inrunner is really up to... Nor do I plan neither to return it to the store as shipment cost alone would exceed the price of this Turnigy equipment...!!!

I feel very dismayed by this product. Yet , it is the first time this has happened to me with any items I have bought at Hobbyking...And this was part of my eleventh order with this store...!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So far worked well on my graupner ju-52. Actually little pit too powerfull but...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Don't Ever use it as a Tail motor. It cant keep up with my honey bee FP helicopter. it has very bad torque on low rev and low response time
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
DON'T BUY THIS MOTOR TO GET RIPPED OFF.

This motor has very very thin 3 cables so how come the high amp will pass through. Secondly, those cables might be torn with a little movement as that's too much thin. Garbage.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
DON'T BUY THIS MOTOR TO GET RIPPED OFF

I bought this, but got thundered how come it has so damn thin cable and how high amp will pass through? Even, the problem is those 3 cables might be torn/broken if a little pull is applied. The bearing even causes noise.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put these motors in a Fokker 70 park-jet model. They burnt out in about a month. They didn't provide much power either. Not the best product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I planned to replace the brushed Motor in an GWS EDF 40. Did not work: kV(RPM) is too low: only 30g thrust @ 2s Lipo :-(

Motor is also not running smooth. It produces scratching sounds from inside.

Screws of the GWS brushed Motor are too small. Use short M2 screwss or glue it into the EDF Tube.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just received this motor. This looks like a garbage. Specially the 3 cables. Very thin so how come high amp current will pass from there?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Muy buen mircomotor, con buenos acabados y funcionamiento.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After one short trials on the bench using no prop and 2 cell li-po (450-15c)the motor became very hot and after 50 sec no movements at all.very Bad!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.