Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

TURNIGY de Bell 2409 1600kv Outrunner

Generating Links

TURNIGY de Bell 2409 1600kv Outrunner

Prix:

Now save économisez 0,00 € 0,00 €

5,79 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
TR_2409_1600
Livraison gratuite? Cliquez ici pour apprendre plus!

Le moteur TURNIGY de cloche ressemble et fonctionne exactement le même que le Towerpros, à 2/3 du coût!

Turnigy de Bell 2409 1600Kv

Poids: 56g
Tension: 10v (2 ~ 3 cellules pack lipo)
Idle actuel: .9
Kv: 1600
Shaft: Diamètre 3mm
Max efficace courant: 15A
Max charge: 20A
Puissance de sortie: 180W
Suggérée Hélice: 9x3.8 E- Hélice

* Ce n'est pas faite par towerpro.

  • Kv ( rpm / v) 1600.00
  • Max Current (A) 20.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 10.00
  • (W ) 180.00
  • Arbre A ( mm ) 3.00
  • Longueur B ( mm ) 37.00
  • Can Diamètre C ( mm ) 31.00
  • Longueur Can D ( mm ) 12.00
  • Longueur totale E ( mm ) 64.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

ikahraman | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 19, 2011

Katalog bilgileri dahilinde kullanlabilir bir motor.

Foamflyer | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 26, 2011

With Towerpro 8x3.8 prop and Turnigy 3S1800, I measure 10.6 volts, 26 amps, 277 watts. A pleasant surprise since it's more power than the similar Towerpro motors, but a little disappointing since I was using a 25-amp controller! Controller got warm and cut out, should be OK. This is one of my favorite battery/motor/prop combinations, I'll see about getting some 30-amp controllers.

hipertommy | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 24, 2011

nice motor good and economic

totovz | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 17, 2011

Superior engine for small money.

Works very well and has a lot of power.

It is much better prepared and better than the same product TowerPro.

5 stars!

Flip__3D | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 16, 2011

I give this motor 5 starts becuse of how powerful it is but DO NO use any bigger prop then 7x5 or your frie ur motor as i did to two of mne :P sucked , but theres a looooooad of poer in this baby.

rog123 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 14, 2011

i made a set up for my axn floater and because i don't have the choice I use this motor with a 6x4e prop with 4s 2200 zippy and give me a good performance at 245watt and 15 A at full trottle but anyway the motor have enougth cooling so for now leave it like that but if can find a 2200kv motor will be better !

ottoha | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 12, 2011

als Alternative zum Towerpro

2409-12T

noch nicht getestet.

Qualitativ guter Eindruck !

Rooks | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 06, 2011

Energy saving motor when use it on 7x6E to fly parkjet. you can easily fly 8-10mins with 2200mah 3s. But the shaft is unchangeable making it less perfect

DavidB CZ | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 01, 2011

TGS 8x4E, 3S 1300 Turnigy 20C, Tower pro 40A - 200W for F4U fighter "pirate" or ME-109 from HK

Sumeet | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 24, 2011

The magnets are strong and seems like stopping the bell from rotating easily. But checked again and powered it with 2200mAh 2S Lipo. The motor runs fine. Nice product for the price.

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!