S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Turnigy Brushless 18A w / programm inverse.

Turnigy Brushless 18A w / programm inverse.

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
187 g
SKU:
18A-SL
Description
du

La série Turnigy sont des contrôleurs de voiture et de bateau vitesse sans balais programmables. La série Turnigy possède des caractéristiques telles que les grands courants d'éclatement, de rupture programmable et inverse, une faible résistance, 2-3 cellules Lipo poids capable et faible.

Spec.
Cont. Courant: 18A
Burst: 50A
Résistance: 0.001ohm
Taille du véhicule: 1/16
Moteur suggéré: Autour de 12T / 2030kv
Batterie: 2 cellules Lipo / 4-6 cellules Ni-XX
BEC: 6V / 1.0A Sortie
Type de moteur: Brushless Sensorless
Taille: 31,5 * 24 * 15mm
Poids: 19g

Tous les Turnigy de sont programmables via la carte numérique de programmation Turnigy.

Product
Specifications

Informations supplémentaires

  • Référence:
    18A-SL
  • Brand:
    Non communiqué
  • Poids (g)
    187.00
  • Longueur
    160.00
  • Largeur:
    50.00
  • Taille:
    60.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Plugged this into my RC18T with a 6800KV motor and, Wow this little truck is blistering fast and does wheelies way to easy if not careful with the throttle. I did not get the programming card, but when I plugged this in, all i had adjust was my throttle trim on my radio. Very easy to set up and it provides plenty of power to my little truck.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good esc, i use it in my lrp s18.tc with a mystery 2835n 3800kv outrunner on 2s ,great power for such a small car .. even trough the motor is a little big for the esc, it doesnt get too hot, just warm..
Programming is easy, and it has got a good punch and really strong brake. handles even big motors and high kV /pole count ones, so that you can use it very well for outrunners with high kv ratings.
Only downside is that the lipo cut off has to be programmed, default setting is disabled.
cutoff voltage can be set from2.6 to 3.4 volts in increments of 0.2v.
in fact it is the same as the EzRun 18a-SL esc, but lower price.
Great product HK!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using this on a 1/16 size buggy. Working perfectly. On off switch could be better protected from dust/moisture.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great ESC a Must Buy it is super powerful I use with castle cm-20 5400rpm 18th scale brushless motor and it is perfect plus you can't beat the price its a 3rd cheaper than high end esc's and just as good if not Better 10 out of 10 rating
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
excellent controleur, je l'utilise depuis 4 ans sur un mini t brushless en 2s et 3s
jamais aucun problemes! prix canon
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
obousmerny regulator pro auta i lode, super
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 2 of this ESC. I did not find it very good coz its throttle increase/decrease does not go in linear. I tried my best with its programming control but no way:-(
I would recommend to buy "Trackstar ESC instead of this one. I can compare btw both of them.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfect ESC for my 1/18 racing cars, small, easy to setup, smooth regulation.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
QC failed, burned at first use, was short-circuited. On top of that my lipo blew up. I'm usually very happy with HK products but this one is not allways to be trusted.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
replacing full-time - 1 / 16 Brushless 4WD Monster Beatle w / 25Amp System did not notice the difference
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.