Turnigy DLUX 10A (10 ~ 60V) HV SBEC

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 10, 2016

Ist grundstzlich gut. Hat aber keine Verpolungssicherheit eingebaut. Darum ist mir einer abgebrannt. War mein Fehler.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 04, 2016

very good BEC, I have it installed on a Trex 550 with a lipo 3s apart. for more effort it never heats, it is a bit difficult to correctly set the alarm voltage as it is done with a potentiometer. but beyond that I recommend ....



muy buen BEC, lo tengo instalado en un trex 550 con una lipo aparte de 3s. por mas que lo esfuerzo nunca calienta, es un poco complicado ajustar correctamente la alarma de voltage ya que se hace con un potenciomentro. pero fuera de eso lo recomiendo....

• Overall
• Quality
• Value

Customer Rated

Jan 05, 2016

Very high Quality Product by TURNIGY very stable power two wire output,one for powering the receiver the other output for scale lighting very convenient and easy to use i like the idea high voltage input no problems for 3s to 6s input no need to buy 2s Thank you H-K fast shipping

• Overall
• Quality
• Value

Customer Rated

Dec 10, 2015

Turnigy Delux BEC i can say it's super delux perfect to my Nitro Helicopter's...no need to worry on servo voltage requirement Thank you HK another great product

• Overall
• Quality
• Value

Customer Rated

Feb 25, 2014

I am using it since nearly one Month now on a 1/5 car with 3x20kg servos 4 cooling fan and it works very well using 8s battery setup 6v setting.
I m very pleased with the product!

• Overall
• Quality
• Value

Customer Rated

Aug 27, 2013

I purchased one of these when first listed - it kept browning out and would not supply much power. Others had the same issue.. I removed a surface mount capacitor as per one of the posted pictures and works a treat..



So i waited till recently to purchase another one hoping they had fixed the issue..

Nope - same problem with my second one purchased recently.. browns out at minimal current.



Removed the capacitor on this one and it now works a tread..



It's got me how others are saying they work ok? 2 out of 2 for me needed surgury to work properly.



But once working are really nice!!! i'd buy more only becasue i'm confident now ate getting them working properly - lol

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 04, 2013

I use this on my TREX550 with 3gx v3 3 stock align 610 servos on cyclic and one futaba on tail. I haven't done any 3d but so far so good.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 25, 2013

Perfect built quality - very strong SBEC - highly recommended

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 22, 2013

Very nice SBEC, i was only able to test it up to 4 A at 5.2 Volt setting. The SBEC delivers 5.25 volt and keeps pretty stable between idle and 4 A. It keeps cool and a test with a cheap e-sky 35 Mhz 6-channel receiver with 5 servos showed a flawless funktion. I just wound the receiver antenna around the SBEC and noticed no failures, jitter or undesired servo movement. I`ll buy some more of this lovely SBEC units!



The wiring is very good quality, and the manual is easy to understand. This one is a true winner!

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 04, 2013

Pleasantly surpized at this cool unit. Runnining it directly of the mains of my 12S heli setup, nice cool bright green led, you can spot it almost a mile away. And a RED heavily flashing led if the battery is low. Will defentily buy another one.