New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Turnigy DLUX 120A HV Brushless Speed ​​Controller (OPTO)

Turnigy DLUX 120A HV Brushless Speed ​​Controller (OPTO)

Discontinued Product

Please continue searching for a similar product.
Poids
165 g
SKU:
TGY_DEL120HV
WANT FREE SHIPPING? Click here to find out more!

Turnigy® Dlux CES ont établi un nouveau point de repère dans la qualité et la performance. Chaque ESC utilise une conception de PCB double séparant l'alimentation du moteur et MCU. Cette conception permet une mise en page optimale du composant sur chaque carte et fournit la configuration idéale pour la dissipation de la chaleur et de l'efficacité thermique. Les deux PCB sont enfermés dans un boîtier de dissipateur thermique complète en aluminium pour assurer une dispersion maximale de la chaleur. Tous les CES Turnigy Dlux peuvent être programmés via une carte de programmation ou par l'émetteur. Des instructions claires et faciles à comprendre sont inclus.

Spec.
Max Cont actuel: 120A
Max Burst actuelle: 140A
BEC: N / A
LiPo: 6 ~ 12S
NiMH: 16 ~ 36cells
Poids: 129grams
Max RPM (2 pôles): 200,000rpm
Taille: 60 x 33 x 23mm
Branchez Moteur: 4mm femelle balle Connecteur
Branchez la batterie: Néant
Caractéristiques: Spark Eliminator avec prise 2mm

Caractéristiques.
Extrêmement faible résistance interne
Très basse température de fonctionnement
Protection contre la surchauffe
APEC MOSFET (Taiwain)

Options de programmation.
Type de batterie: 6S ~ 12S
Avant / Arrière
Démarrage en douceur
LV Couper type (Ignorer, Réduire Power, Arrêt du moteur)
LV Coupez réglage (2,5 ~ 3.5v par incréments de 0,1V)
Timing (Auto, Très faible, Faible, Normale, Haute, Très HGH)
Commutation (8,16kHz)
usine de restauration
Contrôle RPM actif: On / Off (Mode gouverneur)

Réglages d'usine par défaut.
Brake: off
Batterie: LiPo Détection automatique
Low Voltage: 3.2v (mise hors tension du moteur)
Timing: Auto
Fréquence: 8 KHz

Remarque: la boîte de programmation maintenant disponible, vérifiez les éléments connexes ci-dessous.

  • UGS TGY_DEL120HV
  • Brand -
  • Capacité ( mAh ) -
  • Poids (g) 165.00
  • Longueur 140.00
  • Largeur 25.00
  • la taille 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I purchased this ESC a few months ago and I am very pleased with it. I have it in my giant scale Bud Nosen Citabria. I am running a Turnigy 1.60 motor and 10 cell lipo set up in it and I have more power than I need to fly the plane. The ESC was easy to set up. I just set the throttle setting on the transmitter and use the factory defaults settings. The program card was not available at the Arkansas warehouse when I got the esc. It was only available at the international warehouse. I hope to get the Program card soon where I can use the data logging capabilities with it. I have looked several places to find a HV ESC that will run a 10 cell set up for less money and I have not found one yet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this ESC a few months ago and I am very pleased with it. I have it in my giant scale Bud Nosen Citabria. I am running a Turnigy 1.60 motor and 10 cell lipo set up in it and I have more power than I need to fly the plane. The ESC was easy to set up. I just set the throttle setting on the transmitter and use the factory defaults settings. The program card was not available at the Arkansas warehouse when I got the esc. It was only available at the international warehouse. I hope to get the Program card soon where I can use the data logging capabilities with it. I have looked several places to find a HV ESC that will run a 10 cell set up for less money and I have not found one yet.

I got this shipped to me here in USA, traveled with it to China to test fly a new plane we are in process of developing and the unit was DOA....I ended up using the ZTW ESC that I had also got in spare. Glad I did because it would have killed the trip. I got this ESC for the datalogging feature for our test flying review of parameters and data review of the flight....Not this time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got this shipped to me here in USA, traveled with it to China to test fly a new plane we are in process of developing and the unit was DOA....I ended up using the ZTW ESC that I had also got in spare. Glad I did because it would have killed the trip. I got this ESC for the datalogging feature for our test flying review of parameters and data review of the flight....Not this time.

I used this on my assault 700, 12S setup, everything went ok for less than 10 flight but today, I was on the flying field and this ESC stop working on air, luckly I could manouver thanks to a good pitch curve and a great flight controller, I land safely from a 30 meters autorotation descend.
When I plugged again the battery it make a HUGE spark and even desoldered my EC5 connector, with 10AWG wire on it.

Really disappointing, it could be much worse.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I used this on my assault 700, 12S setup, everything went ok for less than 10 flight but today, I was on the flying field and this ESC stop working on air, luckly I could manouver thanks to a good pitch curve and a great flight controller, I land safely from a 30 meters autorotation descend.
When I plugged again the battery it make a HUGE spark and even desoldered my EC5 connector, with 10AWG wire on it.

Really disappointing, it could be much worse.

Sorry guys... this doesn't work with Neu Motors... tried in an electric F3D model.. and got the dreaded timing grumble. Tried all timing & switching modes - no consistent startup/running. Not usable. Used the programming box to change settings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sorry guys... this doesn't work with Neu Motors... tried in an electric F3D model.. and got the dreaded timing grumble. Tried all timing & switching modes - no consistent startup/running. Not usable. Used the programming box to change settings.

Hi all, I have used DLux ESC, but the 120A seems less reliable than others. I used this 120A ESC @ 90A, under 8s, and it fried, after only 4 or 5 flights! Other members of my club had the same problem. I think that 120A is optimistic value. Since this event, I generously downgrades my ESC's. So, to this 90A, I chose a DLux 160A.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi all, I have used DLux ESC, but the 120A seems less reliable than others. I used this 120A ESC @ 90A, under 8s, and it fried, after only 4 or 5 flights! Other members of my club had the same problem. I think that 120A is optimistic value. Since this event, I generously downgrades my ESC's. So, to this 90A, I chose a DLux 160A.

Produit rpondant mon attente,c 'est du costaud,la qualit semble etre l avec fils en cuivre et non pas cette matiere insoudable se trouvant sur d'autres controleurs, ,prix imbattable pour ce 120A -HV- utiliser avec sa carte de programmation spcifique indispensable pour ne pas se prendre la tete et qui est d'une facilit deconcertante-merci HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Produit rpondant mon attente,c 'est du costaud,la qualit semble etre l avec fils en cuivre et non pas cette matiere insoudable se trouvant sur d'autres controleurs, ,prix imbattable pour ce 120A -HV- utiliser avec sa carte de programmation spcifique indispensable pour ne pas se prendre la tete et qui est d'une facilit deconcertante-merci HK

I'm using several Turnigy Dlux ESC's of different Amps. This is my first 120 Amp version. The first I've got didn't work out of the box. After sending a video to HK I received full refund and ordered a new one. The second one was ok and I'm running it on 10S 5000mAH on a Turnigy G160 motor with APC 19x12 prop, no problem what so ever! Turnigy programming box is recommanded.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using several Turnigy Dlux ESC's of different Amps. This is my first 120 Amp version. The first I've got didn't work out of the box. After sending a video to HK I received full refund and ordered a new one. The second one was ok and I'm running it on 10S 5000mAH on a Turnigy G160 motor with APC 19x12 prop, no problem what so ever! Turnigy programming box is recommanded.

Got this ESC for my HK mercury 90mm 8s fan. does the job very well! Thanks a lot HK!! :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this ESC for my HK mercury 90mm 8s fan. does the job very well! Thanks a lot HK!! :)

bonjour pour moi set un produit tres ngative ne convient pas pour un 700 a vote risque pour duit dfectueux

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bonjour pour moi set un produit tres ngative ne convient pas pour un 700 a vote risque pour duit dfectueux

Good quality made esc made to last a good esc for a 90mm jet like a mb339 that's what i am putting it in?quality sealed unit and heat sink.like the quality and the design

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality made esc made to last a good esc for a 90mm jet like a mb339 that's what i am putting it in?quality sealed unit and heat sink.like the quality and the design

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
Nick's Turnigy Dlux HV Programming Guide Download [192]
Nick's Turnigy dLux HV Programming Guide Download [192]
same as this esc Download [25]
Interpreting the beeps Download [7]
Sparkcontrol Download [83]
2017-02-06.jpg Download [1]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!