Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy DLUX 160A HV Brushless Speed ​​Controller (OPTO)

Generating Links

Turnigy DLUX 160A HV Brushless Speed ​​Controller (OPTO)

Prix:

Now save économisez 0,00 € 0,00 €

143,96 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
TGY_DEL160HV
Livraison gratuite? Cliquez ici pour apprendre plus!

Turnigy® Dlux CES ont établi un nouveau point de repère dans la qualité et la performance. Chaque ESC utilise une conception de PCB double séparant l'alimentation du moteur et MCU. Cette conception permet une mise en page optimale du composant sur chaque carte et fournit la configuration idéale pour la dissipation de la chaleur et de l'efficacité thermique. Les deux PCB sont enfermés dans un boîtier de dissipateur thermique complète en aluminium pour assurer une dispersion maximale de la chaleur. Tous les CES Turnigy Dlux peuvent être programmés via une carte de programmation ou par l'émetteur. Des instructions claires et faciles à comprendre sont inclus.

Spec.
Max Cont actuel: 160A
Max Burst actuelle: 180A
BEC: N / A
LiPo: 6 ~ 12S
NiMH: 16 ~ 36cells
Poids: 157grams
Max RPM (2 pôles): 200,000rpm
Taille: 83 x 33 x 23mm
Branchez Moteur: 4mm femelle balle Connecteur
Branchez la batterie: Néant
Caractéristiques: Spark Eliminator avec prise 2mm

Caractéristiques.
Extrêmement faible résistance interne
Très basse température de fonctionnement
Protection contre la surchauffe
APEC MOSFET (Taiwain)

Options de programmation.
Type de batterie: 6S ~ 12S
Avant / Arrière
Démarrage en douceur
LV Couper type (Ignorer, Réduire Power, Arrêt du moteur)
LV Coupez réglage (2,5 ~ 3.5v par incréments de 0,1V)
Timing (Auto, Très faible, Faible, Normale, Haute, Très HGH)
Commutation (8,16kHz)
usine de restauration
Contrôle RPM actif: On / Off (Mode gouverneur)

Réglages d'usine par défaut.
Brake: off
Batterie: LiPo Détection automatique
Low Voltage: 3.2v (mise hors tension du moteur)
Timing: Auto
Fréquence: 8 KHz

Remarque: la boîte de programmation maintenant disponible, vérifiez les éléments connexes ci-dessous.

  • Turnigy DLux 6s-12s ESC
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Furby_Goulag | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 09, 2016

Bought to power a big boat on 10S.

Before puting a custom watercooling on it, runned it on 10S out of the water (no load).

Burnt almost instantly, do not understand the issue, but seems of not very good quality.

Dieselrotor | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 15, 2015

I ordered one of these to replace a 35ccNGH motor I had bought from Hobbyking that arrived damaged and was warrantied but still absolutely refuses to run inverted so I decided to go electric instead. Ironically, the ESC arrived, looked great,looked well built but would not power up ? I kind of had to chuckle having spent this money to replace another high buck product from here and now I have the same plane with two power systems that still has not flown LOL ! I found a Youtube video with this ESC that had the same problem for that guy. But know, I am happy with Hobbyking, they're doing a great job and they're stuff is reasonably priced. I just happened to get two lemons for the same plane 6 months apart.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 16, 2015

Muy facil de programar,asta ahora bien,lo tengo instalado en una turbina de 90 electrica a 12s

Barry | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2015

Used this three times drawing 101 amps on 10S. On the third flight it went off with a bang, melting itself and dropping molten solder onto the bottom of the cowl (spun aluminium luckily). Luckily it was not mounted in the fuselage or my 1/3 scale WW1 Moraine may have been shot down in flames.

samsman | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2015

Too late for me to realize that there were actually so many bad reviews on this dLux esc. I just couldn't agree more with those negative comments and reviews. Here's the video proof. https://youtu.be/Ej0BkiQWESI

Don't bother the 4 star ratings, without it, my review will simply disappear in the thin air! I gave it 0 star!

samsman | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2015

Too late for me to realize that there were actually so many bad reviews on this dLux esc. I couldn't agree more with those negative comments. Here's the video proof. https://youtu.be/Ej0BkiQWESI

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 22, 2015

facilmente programmabile e di grande affidamento....davvero un ottimo regolatore

Tim UK | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 25, 2015

Compared with its big brother on steroids - the Turnigy Dlux HV 250V, (that I bought shortly before this one), this high power, HV ESC is significantly more compact & only about a third of the weight, but still feels very solid & has good heat-sinking. Not the same overkill with the leads & connectors of its big brother either. All power-carrying leads are 10AWG, with the motor tails pre-terminated in gold 4mm females, while the power connections are tinned bare ends. Theres also, a thin anti-spark pre-connection lead on the positive side of the supply. ....... This HV ESC programs fine with the Turnigy Dlux programmer BUT - there are absolutely no relevant instructions supplied with the ESC or the Dlux programmer regarding connection to or how to use the programmer so you have to discover for yourself that this ESC (unlike many other BEC-less ESCs, including Turnigy K force series etc.) has to be connected to HV motor power (6s LiPo min) AS WELL as being supplied with 5v/6v on its "servo" lead (as per normal with non-BEC ESCs) before the programmer will talk to it.

Dean Blair | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 24, 2015

Great ESC, great price too... I have this wired up to the HK rotomax 50cc motor and seems to handle everything okay. The anti spark feature that comes with this ESC I haven't used, I just covered the bullet with heat shrink and shrunk it onto the red main wire lead. I have made a separate anti spark connector. I like it HK! Thanks a lot!!! :)

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 10, 2014

Received, but have not had a chance to use yet. Arrived greatly packed and looks great.

  1. 1
  2. 2
  3. 3
  4. 4
Fichiers clients
Rogero_Dlux160HV_Trex600E Download [1611]
Nick's Turnigy Dlux HV Programming Guide Download [192]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!