Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy DLUX 30A SBEC Brushless Speed ​​Controller w / Data Logging (2s ~ 4s)

Generating Links

Turnigy DLUX 30A SBEC Brushless Speed ​​Controller w / Data Logging (2s ~ 4s)

Prix:

Now save économisez 0,00 € 0,00 €

23,74 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9192000027
Livraison gratuite? Cliquez ici pour apprendre plus!

Turnigy® Dlux SBEC CES ont établi un nouveau point de repère dans la qualité et la performance, si bien que cette ESC léger et très polyvalent peut gérer jusqu'à 4s et + 10A éclater de courant avec une totale tranquillité d'esprit. La programmation et l'enregistrement des données de nombreuses caractéristiques offrent également une polyvalence des applications rarement vu dans un ESC de cette note. Tous les CES Turnigy Dlux peuvent être programmés via une carte de programmation ou par l'émetteur. Des instructions claires et faciles à comprendre sont inclus.

* Maintenant, avec l'enregistrement de données visibles lorsqu'il est utilisé avec la boîte de programmation Turnigy DLUX.

L' enregistrement des données d' affichage des paramètres:
Température maximale
Environnement Température
Max actuel
courant min
tension maximale
Min Voltage
Tension nominale
tension,
Motor Run Time
Puissance sur le temps
Moteur Nombre Pole
RPM Max Motor
Temps d'erreur

Spec.
Max Cont. : 30A
Max Burst: 40A
Max BEC: 2A
BEC Voltage: 5.5v
LiPo: 2 ~ 4S
Poids: 23grams
Max RPM (2 pôles): 200,000rpm
Taille: 51 x 27 x 11mm
Branchez Moteur: bullet connecteur 3.5mm Femelle
Branchez la batterie: Néant

Caractéristiques.
• Très faible résistance interne
• La température très basse de fonctionnement
• Protection contre la surchauffe
• APEC MOSFET (Taiwain)

Options de programmation.
Type de batterie: 2S 4S ~
Avant / Arrière
Démarrage en douceur
LV Couper type (Ignorer, Réduire Power, Arrêt du moteur)
LV Coupez réglage (2,5 ~ 3.5v par incréments de 0,1V)
Timing (Auto, moyen, élevé)
Commutation (8,16kHz)
usine de restauration
Contrôle RPM actif: On / Off (Mode gouverneur)

Réglages d'usine par défaut.
Brake: off
Batterie: LiPo Détection automatique
Low Voltage: 3.2v (mise hors tension du moteur)
Timing: Auto
Fréquence: 8 KHz

Remarque: la boîte de programmation maintenant disponible, vérifiez les éléments connexes ci - dessous.

  • Delux 20A & 30A ESC
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Vladimír | Acheteur vérifié

  • Overall
  • Quality
  • Value

OK

Oct 17, 2019

OK

Super Scooby | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 30, 2015

very nice esc. works perfectly. I haven't used the logger. but, don't intend to..

Super Scooby | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 30, 2015

This is a nice little esc. running a 2826 with an apc7x4 pusher on 3s. works perfectly. operates cool!

visioneer_one | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 27, 2014

Installed one into my Super Zoom XL. Setup is a SK3 3530-1100kv, 12x6 prop, 3S packs, DS929MGs on the ailerons and MG16s on the elevator and rudder. Orange 6-channel RX w/ satellite. Throttle response seemed laggy. I guess I missed the part in the description where the BEC is rated at 2A, because ~1 minute into the first flight the plane locked out and flew into the bush. Blinking rx lights indicated power loss. Oops! After repairs I swapped in a beat-up CC Thunderbird-36 and all has been well since.
BTW the datalogging features work... make sure you have the current version (v2.1 or greater) of the programming box, as the older boxes do NOT recognize this controller.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 05, 2013

Wonderful product and as long as you spend a little extra for the programming box, this thing is amazing! 23.5 grams all up weight after I soldered on some micro 2mm gold connectors on the input leads.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 28, 2013

Using this esc in my funfighter bf109 because the original esc burnt out after 6 flights(20a) and it pulls 23a !!!

8 flights upto now and going strong

Tim | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 26, 2013

This is the first ECS I have and it runs perfectly, I would recommend it.
But it is the first one iv used so I don't have anything to compare it to.
I put it in the Bixler 1.1 and with in the week iv had over 20 flights with it.
I got the dlux programming box and it is very easy to use even for a first one.

tommo90 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 12, 2013

This ESC is amazing, I plugged it in the wrong way (more than once) and iv had no issues with it. As a real new guy to the hobby I dont have much to go on,. but with my experience in electronics the fact it survived such a stupid mistake then its got to be worth a go!

sgchuco | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 29, 2013

The ESC is awesome, much lighter than my HK red brick one, though the heat has something to do with that. Now I just need to get me that program box to use the data logging feature

snappy | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 28, 2012

I got one and it survived an accidental brief reverse connection!!
One aspect which I am not too pleased with, is the fact that to gather the data you will need to disconnect the connection to the receiver.

  1. 1
  2. 2
Fichiers clients
No File Name Download [5098]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires